public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Bjorn Helgaas <helgaas@kernel.org>
To: "Mateusz Jończyk" <mat.jonczyk@o2.pl>
Cc: linux-kernel@vger.kernel.org, x86@kernel.org,
	Thomas Gleixner <tglx@linutronix.de>,
	Ingo Molnar <mingo@redhat.com>, Borislav Petkov <bp@alien8.de>,
	Dave Hansen <dave.hansen@linux.intel.com>,
	"H. Peter Anvin" <hpa@zytor.com>,
	"Ira W . Snyder" <ira.snyder@gmail.com>
Subject: Re: [PATCH v2 08/10] x86/Kconfig: make CONFIG_PCI_CNB20LE_QUIRK depend on X86_32
Date: Tue, 13 Sep 2022 17:50:36 -0500	[thread overview]
Message-ID: <20220913225036.GA631462@bhelgaas> (raw)
In-Reply-To: <20220911084711.13694-9-mat.jonczyk@o2.pl>

On Sun, Sep 11, 2022 at 10:47:09AM +0200, Mateusz Jończyk wrote:
> I was unable to find a good description of the ServerWorks CNB20LE
> chipset. However, it was probably exclusively used with the Pentium III
> processor (this CPU model was used in all references to it that I
> found where the CPU model was provided: dmesgs in [1] and [2];
> [3] page 2; [4]-[7]).
> 
> As is widely known, the Pentium III processor did not support the 64-bit
> mode, support for which was introduced by Intel a couple of years later.
> So it is safe to assume that no systems with the CNB20LE chipset have
> amd64 and the CONFIG_PCI_CNB20LE_QUIRK may now depend on X86_32.
> 
> Additionally, I have determined that most computers with the CNB20LE
> chipset did have ACPI support and this driver was inactive on them.
> I have submitted a patch to remove this driver, but it was met with
> resistance [8].

Only because removing the driver appeared to have no demonstrated
benefit and risked breaking old machines.

Making this depend on X86_32 seems plausible to me.

> [8] Bjorn Helgaas, "Re: [PATCH] x86/pci: drop ServerWorks / Broadcom
> CNB20LE PCI host bridge driver"
> https://lore.kernel.org/lkml/20220318165535.GA840063@bhelgaas/T/
> 
> Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Ingo Molnar <mingo@redhat.com>
> Cc: Borislav Petkov <bp@alien8.de>
> Cc: Dave Hansen <dave.hansen@linux.intel.com>
> Cc: x86@kernel.org
> Cc: "H. Peter Anvin" <hpa@zytor.com>
> Cc: Ira W. Snyder <ira.snyder@gmail.com>
> Cc: Bjorn Helgaas <helgaas@kernel.org>
> ---
> v2: make CONFIG_PCI_CNB20LE_QUIRK depend on X86_32
>     (previously only help text and description were changed)
>     upgrade short description.
> 
>  arch/x86/Kconfig | 12 ++++++++++--
>  1 file changed, 10 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
> index fdfe8b7e895a..31f778b0cd0b 100644
> --- a/arch/x86/Kconfig
> +++ b/arch/x86/Kconfig
> @@ -2739,13 +2739,21 @@ config MMCONF_FAM10H
>  	depends on X86_64 && PCI_MMCONFIG && ACPI
>  
>  config PCI_CNB20LE_QUIRK
> -	bool "Read CNB20LE Host Bridge Windows" if EXPERT
> -	depends on PCI
> +	bool "Read PCI host bridge windows from the CNB20LE chipset" if EXPERT
> +	depends on X86_32 && PCI
>  	help
>  	  Read the PCI windows out of the CNB20LE host bridge. This allows
>  	  PCI hotplug to work on systems with the CNB20LE chipset which do
>  	  not have ACPI.
>  
> +	  The ServerWorks (later Broadcom) CNB20LE was a chipset designed
> +	  most probably only for Pentium III.
> +
> +	  To find out if you have such a chipset, search for a PCI device with
> +	  1166:0009 PCI IDs, for example by executing
> +		lspci -nn | grep '1166:0009'
> +	  The code is inactive if there is none.
> +
>  	  There's no public spec for this chipset, and this functionality
>  	  is known to be incomplete.
>  
> -- 
> 2.25.1
> 

  reply	other threads:[~2022-09-13 22:50 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-09-11  8:47 [PATCH v2 00/10] x86: Kconfig cleanups and help text improvements Mateusz Jończyk
2022-09-11  8:47 ` [PATCH v2 01/10] x86/Kconfig: enable X86_X2APIC by default and improve help text Mateusz Jończyk
2022-10-26 18:38   ` Borislav Petkov
2022-12-01 15:11     ` Thomas Gleixner
2022-10-27 14:45   ` Elliott, Robert (Servers)
2022-10-27 15:07     ` Dave Hansen
2022-11-03 23:41       ` Elliott, Robert (Servers)
2022-11-04 17:29         ` Dave Hansen
2024-02-02 14:08   ` David Heidelberg
2024-02-15 21:10     ` Mateusz Jończyk
2024-02-20 16:26       ` David Heidelberg
2024-07-05 22:28       ` David Heidelberg
2022-09-11  8:47 ` [PATCH v2 02/10] x86/apic: fix panic message when x2APIC is not supported Mateusz Jończyk
2022-10-27 15:08   ` Elliott, Robert (Servers)
2022-09-11  8:47 ` [PATCH v2 03/10] x86/Kconfig: always enable ARCH_SPARSEMEM_ENABLE Mateusz Jończyk
2022-09-11  8:47 ` [PATCH v2 04/10] x86/Kconfig: drop X86_32_NON_STANDARD Mateusz Jończyk
2022-09-11  8:47 ` [PATCH v2 05/10] x86/Kconfig: move all X86_EXTENDED_PLATFORM options together Mateusz Jończyk
2022-09-11  8:47 ` [PATCH v2 06/10] x86/Kconfig: update lists in X86_EXTENDED_PLATFORM Mateusz Jończyk
2022-09-11  8:47 ` [PATCH v2 07/10] x86/Kconfig: document CONFIG_PCI_MMCONFIG Mateusz Jończyk
2022-09-11  8:47 ` [PATCH v2 08/10] x86/Kconfig: make CONFIG_PCI_CNB20LE_QUIRK depend on X86_32 Mateusz Jończyk
2022-09-13 22:50   ` Bjorn Helgaas [this message]
2022-09-11  8:47 ` [PATCH v2 09/10] x86/Kconfig: document release year of glibc 2.3.3 Mateusz Jończyk
2022-09-11  8:47 ` [PATCH v2 10/10] x86/Kconfig: remove CONFIG_ISA_BUS Mateusz Jończyk

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220913225036.GA631462@bhelgaas \
    --to=helgaas@kernel.org \
    --cc=bp@alien8.de \
    --cc=dave.hansen@linux.intel.com \
    --cc=hpa@zytor.com \
    --cc=ira.snyder@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mat.jonczyk@o2.pl \
    --cc=mingo@redhat.com \
    --cc=tglx@linutronix.de \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox