From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org,
Claudiu Beznea <claudiu.beznea@microchip.com>,
Sasha Levin <sashal@kernel.org>
Subject: [PATCH 5.15 06/35] ARM: dts: at91: sama7g5ek: specify proper regulator output ranges
Date: Fri, 16 Sep 2022 12:08:29 +0200 [thread overview]
Message-ID: <20220916100447.204243843@linuxfoundation.org> (raw)
In-Reply-To: <20220916100446.916515275@linuxfoundation.org>
From: Claudiu Beznea <claudiu.beznea@microchip.com>
[ Upstream commit 7f41d52ced9e1b7ed4ff8e1ae9cacbf46b64e6db ]
Min and max output ranges of regulators need to satisfy board
requirements not PMIC requirements. Thus adjust device tree to
cope with this.
Fixes: 7540629e2fc7 ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220826083927.3107272-7-claudiu.beznea@microchip.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/at91-sama7g5ek.dts | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/at91-sama7g5ek.dts b/arch/arm/boot/dts/at91-sama7g5ek.dts
index be51c1dbb4595..2038e387be288 100644
--- a/arch/arm/boot/dts/at91-sama7g5ek.dts
+++ b/arch/arm/boot/dts/at91-sama7g5ek.dts
@@ -169,8 +169,8 @@
regulators {
vdd_3v3: VDD_IO {
regulator-name = "VDD_IO";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3700000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
regulator-initial-mode = <2>;
regulator-allowed-modes = <2>, <4>;
regulator-always-on;
@@ -188,8 +188,8 @@
vddioddr: VDD_DDR {
regulator-name = "VDD_DDR";
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1450000>;
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
regulator-initial-mode = <2>;
regulator-allowed-modes = <2>, <4>;
regulator-always-on;
@@ -209,8 +209,8 @@
vddcore: VDD_CORE {
regulator-name = "VDD_CORE";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1850000>;
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
regulator-initial-mode = <2>;
regulator-allowed-modes = <2>, <4>;
regulator-always-on;
@@ -229,7 +229,7 @@
vddcpu: VDD_OTHER {
regulator-name = "VDD_OTHER";
regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1850000>;
+ regulator-max-microvolt = <1250000>;
regulator-initial-mode = <2>;
regulator-allowed-modes = <2>, <4>;
regulator-ramp-delay = <3125>;
@@ -248,8 +248,8 @@
vldo1: LDO1 {
regulator-name = "LDO1";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3700000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-state-standby {
--
2.35.1
next prev parent reply other threads:[~2022-09-16 10:21 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-16 10:08 [PATCH 5.15 00/35] 5.15.69-rc1 review Greg Kroah-Hartman
2022-09-16 10:08 ` [PATCH 5.15 01/35] NFS: Fix WARN_ON due to unionization of nfs_inode.nrequests Greg Kroah-Hartman
2022-09-16 10:08 ` [PATCH 5.15 02/35] ACPI: resource: skip IRQ override on AMD Zen platforms Greg Kroah-Hartman
2022-09-16 10:08 ` [PATCH 5.15 03/35] ARM: dts: imx: align SPI NOR node name with dtschema Greg Kroah-Hartman
2022-09-16 10:08 ` [PATCH 5.15 04/35] ARM: dts: imx6qdl-kontron-samx6i: fix spi-flash compatible Greg Kroah-Hartman
2022-09-16 10:08 ` [PATCH 5.15 05/35] ARM: dts: at91: fix low limit for CPU regulator Greg Kroah-Hartman
2022-09-16 10:08 ` Greg Kroah-Hartman [this message]
2022-09-16 10:08 ` [PATCH 5.15 07/35] lockdep: Fix -Wunused-parameter for _THIS_IP_ Greg Kroah-Hartman
2022-09-16 10:08 ` [PATCH 5.15 08/35] x86/mm: Force-inline __phys_addr_nodebug() Greg Kroah-Hartman
2022-09-16 10:08 ` [PATCH 5.15 09/35] task_stack, x86/cea: Force-inline stack helpers Greg Kroah-Hartman
2022-09-16 10:08 ` [PATCH 5.15 10/35] tracing: hold caller_addr to hardirq_{enable,disable}_ip Greg Kroah-Hartman
2022-09-16 10:08 ` [PATCH 5.15 11/35] tracefs: Only clobber mode/uid/gid on remount if asked Greg Kroah-Hartman
2022-09-16 10:08 ` [PATCH 5.15 12/35] iommu/vt-d: Fix kdump kernels boot failure with scalable mode Greg Kroah-Hartman
2022-09-16 10:08 ` [PATCH 5.15 13/35] Input: goodix - add support for GT1158 Greg Kroah-Hartman
2022-09-16 10:08 ` [PATCH 5.15 14/35] platform/surface: aggregator_registry: Add support for Surface Laptop Go 2 Greg Kroah-Hartman
2022-09-16 10:08 ` [PATCH 5.15 15/35] drm/msm/rd: Fix FIFO-full deadlock Greg Kroah-Hartman
2022-09-16 10:08 ` [PATCH 5.15 16/35] hwmon: (pmbus) Use dev_err_probe() to filter -EPROBE_DEFER error messages Greg Kroah-Hartman
2022-09-16 10:08 ` [PATCH 5.15 17/35] dt-bindings: iio: gyroscope: bosch,bmg160: correct number of pins Greg Kroah-Hartman
2022-09-16 10:08 ` [PATCH 5.15 18/35] HID: ishtp-hid-clientHID: ishtp-hid-client: Fix comment typo Greg Kroah-Hartman
2022-09-16 10:08 ` [PATCH 5.15 19/35] hid: intel-ish-hid: ishtp: Fix ishtp client sending disordered message Greg Kroah-Hartman
2022-09-16 10:08 ` [PATCH 5.15 20/35] tg3: Disable tg3 device on system reboot to avoid triggering AER Greg Kroah-Hartman
2022-09-16 10:08 ` [PATCH 5.15 21/35] gpio: mockup: remove gpio debugfs when remove device Greg Kroah-Hartman
2022-09-16 10:08 ` [PATCH 5.15 22/35] ieee802154: cc2520: add rc code in cc2520_tx() Greg Kroah-Hartman
2022-09-16 10:08 ` [PATCH 5.15 23/35] Input: iforce - add support for Boeder Force Feedback Wheel Greg Kroah-Hartman
2022-09-16 10:08 ` [PATCH 5.15 24/35] nvmet-tcp: fix unhandled tcp states in nvmet_tcp_state_change() Greg Kroah-Hartman
2022-09-16 10:08 ` [PATCH 5.15 25/35] drm/amd/amdgpu: skip ucode loading if ucode_size == 0 Greg Kroah-Hartman
2022-09-16 10:08 ` [PATCH 5.15 26/35] net: dsa: hellcreek: Print warning only once Greg Kroah-Hartman
2022-09-16 10:08 ` [PATCH 5.15 27/35] perf/arm_pmu_platform: fix tests for platform_get_irq() failure Greg Kroah-Hartman
2022-09-16 10:08 ` [PATCH 5.15 28/35] platform/x86: acer-wmi: Acer Aspire One AOD270/Packard Bell Dot keymap fixes Greg Kroah-Hartman
2022-09-16 10:08 ` [PATCH 5.15 29/35] usb: storage: Add ASUS <0x0b05:0x1932> to IGNORE_UAS Greg Kroah-Hartman
2022-09-16 10:08 ` [PATCH 5.15 30/35] mm: Fix TLB flush for not-first PFNMAP mappings in unmap_region() Greg Kroah-Hartman
2022-09-16 10:08 ` [PATCH 5.15 31/35] soc: fsl: select FSL_GUTS driver for DPIO Greg Kroah-Hartman
2022-09-16 10:08 ` [PATCH 5.15 32/35] usb: gadget: f_uac2: clean up some inconsistent indenting Greg Kroah-Hartman
2022-09-16 10:08 ` [PATCH 5.15 33/35] usb: gadget: f_uac2: fix superspeed transfer Greg Kroah-Hartman
2022-09-16 10:08 ` [PATCH 5.15 34/35] RDMA/irdma: Use s/g array in post send only when its valid Greg Kroah-Hartman
2022-09-16 10:08 ` [PATCH 5.15 35/35] Input: goodix - add compatible string for GT1158 Greg Kroah-Hartman
2022-09-16 21:48 ` [PATCH 5.15 00/35] 5.15.69-rc1 review Guenter Roeck
2022-09-17 4:11 ` Bagas Sanjaya
2022-09-17 10:19 ` Ron Economos
2022-09-17 14:09 ` Sudip Mukherjee (Codethink)
2022-09-17 15:57 ` Naresh Kamboju
2022-09-19 0:00 ` Florian Fainelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220916100447.204243843@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=claudiu.beznea@microchip.com \
--cc=linux-kernel@vger.kernel.org \
--cc=sashal@kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox