From: Cai Huoqing <cai.huoqing@linux.dev>
To: fancer.lancer@gmail.com
Cc: caihuoqing <caihuoqing@baidu.com>,
Gustavo Pimentel <gustavo.pimentel@synopsys.com>,
Vinod Koul <vkoul@kernel.org>,
linux-kernel@vger.kernel.org, dmaengine@vger.kernel.org
Subject: [PATCH 0/3] dmaengine: dw-edma: Add support for native HDMA
Date: Wed, 21 Sep 2022 14:48:49 +0800 [thread overview]
Message-ID: <20220921064859.10328-1-cai.huoqing@linux.dev> (raw)
From: caihuoqing <caihuoqing@baidu.com>
Add support for HDMA NATIVE, as long the IP design has set
the compatible register map parameter-HDMA_NATIVE,
which allows compatibility for native HDMA register configuration.
The HDMA Hyper-DMA IP is an enhancement of the eDMA embedded-DMA IP.
And the native HDMA registers are different from eDMA,
so this patch add support for HDMA NATIVE mode.
HDMA write and read channels operate independently to maximize
the performance of the HDMA read and write data transfer over
the link When you configure the HDMA with multiple read channels,
then it uses a round robin (RR) arbitration scheme to select
the next read channel to be serviced.
The same applies when you have multiple write channels.
The native HDMA driver also supports a maximum of 16 independent
channels (8 write + 8 read), which can run simultaneously.
Both SAR (Source Address Register) and DAR (Destination Address Register)
are alignmented to byte.dmaengine: dw-edma: Add support for native HDMA
These series based on the series
https://lore.kernel.org/dmaengine/20220822185332.26149-1-Sergey.Semin@baikalelectronics.ru/
Cai Huoqing (3):
dmaengine: dw-edma: Rename dw_edma_core_ops structure to
dw_edma_plat_ops
dmaengine: dw-edma: Create a new dw_edma_core_ops structure to
abstract controller operation
dmaengine: dw-edma: Add support for native HDMA
drivers/dma/dw-edma/Makefile | 6 +-
drivers/dma/dw-edma/dw-edma-core.c | 65 ++---
drivers/dma/dw-edma/dw-edma-core.h | 19 ++
drivers/dma/dw-edma/dw-edma-pcie.c | 4 +-
drivers/dma/dw-edma/dw-edma-v0-core.c | 90 ++++++-
drivers/dma/dw-edma/dw-edma-v0-core.h | 14 +-
drivers/dma/dw-edma/dw-hdma-v0-core.c | 304 +++++++++++++++++++++++
drivers/dma/dw-edma/dw-hdma-v0-core.h | 17 ++
drivers/dma/dw-edma/dw-hdma-v0-debugfs.c | 150 +++++++++++
drivers/dma/dw-edma/dw-hdma-v0-debugfs.h | 22 ++
drivers/dma/dw-edma/dw-hdma-v0-regs.h | 98 ++++++++
include/linux/dma/edma.h | 7 +-
12 files changed, 725 insertions(+), 71 deletions(-)
create mode 100644 drivers/dma/dw-edma/dw-hdma-v0-core.c
create mode 100644 drivers/dma/dw-edma/dw-hdma-v0-core.h
create mode 100644 drivers/dma/dw-edma/dw-hdma-v0-debugfs.c
create mode 100644 drivers/dma/dw-edma/dw-hdma-v0-debugfs.h
create mode 100644 drivers/dma/dw-edma/dw-hdma-v0-regs.h
--
2.25.1
next reply other threads:[~2022-09-21 6:49 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-21 6:48 Cai Huoqing [this message]
2022-09-21 6:48 ` [PATCH 1/3] dmaengine: dw-edma: Rename dw_edma_core_ops structure to dw_edma_plat_ops Cai Huoqing
2022-11-04 13:42 ` Vinod Koul
2022-11-07 3:12 ` Cai Huoqing
2023-02-09 23:26 ` Serge Semin
2023-02-09 23:34 ` Serge Semin
2022-09-21 6:48 ` [PATCH 2/3] dmaengine: dw-edma: Create a new dw_edma_core_ops structure to abstract controller operation Cai Huoqing
2022-11-04 13:45 ` Vinod Koul
2022-11-07 3:20 ` Cai Huoqing
2023-02-10 0:57 ` Serge Semin
2023-02-10 17:06 ` Serge Semin
2022-09-21 6:48 ` [PATCH 3/3] dmaengine: dw-edma: Add support for native HDMA Cai Huoqing
2022-11-04 13:53 ` Vinod Koul
2023-02-10 18:13 ` Serge Semin
2022-09-25 17:34 ` [PATCH 0/3] " Serge Semin
2023-02-09 22:40 ` Serge Semin
2023-02-10 0:59 ` Serge Semin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220921064859.10328-1-cai.huoqing@linux.dev \
--to=cai.huoqing@linux.dev \
--cc=caihuoqing@baidu.com \
--cc=dmaengine@vger.kernel.org \
--cc=fancer.lancer@gmail.com \
--cc=gustavo.pimentel@synopsys.com \
--cc=linux-kernel@vger.kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox