From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: Kalle Valo <kvalo@kernel.org>
Cc: linux-wireless@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 2/2] wireless: wl1251: switch to using gpiod API
Date: Wed, 28 Sep 2022 15:22:10 -0700 [thread overview]
Message-ID: <20220928222210.1922758-2-dmitry.torokhov@gmail.com> (raw)
In-Reply-To: <20220928222210.1922758-1-dmitry.torokhov@gmail.com>
This switches the driver from legacy gpio API to a newer gpiod API.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
drivers/net/wireless/ti/wl1251/spi.c | 63 +++++++++++++------------
drivers/net/wireless/ti/wl1251/wl1251.h | 1 -
2 files changed, 34 insertions(+), 30 deletions(-)
diff --git a/drivers/net/wireless/ti/wl1251/spi.c b/drivers/net/wireless/ti/wl1251/spi.c
index 08d9814b49c1..0ef590a6db53 100644
--- a/drivers/net/wireless/ti/wl1251/spi.c
+++ b/drivers/net/wireless/ti/wl1251/spi.c
@@ -5,6 +5,7 @@
* Copyright (C) 2008 Nokia Corporation
*/
+#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/module.h>
@@ -12,15 +13,19 @@
#include <linux/swab.h>
#include <linux/crc7.h>
#include <linux/spi/spi.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/of.h>
-#include <linux/of_gpio.h>
#include <linux/regulator/consumer.h>
#include "wl1251.h"
#include "reg.h"
#include "spi.h"
+struct wl1251_spi {
+ struct spi_device *spi;
+ struct gpio_desc *power_gpio;
+};
+
static irqreturn_t wl1251_irq(int irq, void *cookie)
{
struct wl1251 *wl;
@@ -34,13 +39,9 @@ static irqreturn_t wl1251_irq(int irq, void *cookie)
return IRQ_HANDLED;
}
-static struct spi_device *wl_to_spi(struct wl1251 *wl)
-{
- return wl->if_priv;
-}
-
static void wl1251_spi_reset(struct wl1251 *wl)
{
+ struct wl1251_spi *wl_spi = wl->if_priv;
u8 *cmd;
struct spi_transfer t;
struct spi_message m;
@@ -60,7 +61,7 @@ static void wl1251_spi_reset(struct wl1251 *wl)
t.len = WSPI_INIT_CMD_LEN;
spi_message_add_tail(&t, &m);
- spi_sync(wl_to_spi(wl), &m);
+ spi_sync(wl_spi->spi, &m);
wl1251_dump(DEBUG_SPI, "spi reset -> ", cmd, WSPI_INIT_CMD_LEN);
@@ -69,6 +70,7 @@ static void wl1251_spi_reset(struct wl1251 *wl)
static void wl1251_spi_wake(struct wl1251 *wl)
{
+ struct wl1251_spi *wl_spi = wl->if_priv;
struct spi_transfer t;
struct spi_message m;
u8 *cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL);
@@ -112,7 +114,7 @@ static void wl1251_spi_wake(struct wl1251 *wl)
t.len = WSPI_INIT_CMD_LEN;
spi_message_add_tail(&t, &m);
- spi_sync(wl_to_spi(wl), &m);
+ spi_sync(wl_spi->spi, &m);
wl1251_dump(DEBUG_SPI, "spi init -> ", cmd, WSPI_INIT_CMD_LEN);
@@ -128,6 +130,7 @@ static void wl1251_spi_reset_wake(struct wl1251 *wl)
static void wl1251_spi_read(struct wl1251 *wl, int addr, void *buf,
size_t len)
{
+ struct wl1251_spi *wl_spi = wl->if_priv;
struct spi_transfer t[3];
struct spi_message m;
u8 *busy_buf;
@@ -157,7 +160,7 @@ static void wl1251_spi_read(struct wl1251 *wl, int addr, void *buf,
t[2].len = len;
spi_message_add_tail(&t[2], &m);
- spi_sync(wl_to_spi(wl), &m);
+ spi_sync(wl_spi->spi, &m);
/* FIXME: check busy words */
@@ -168,6 +171,7 @@ static void wl1251_spi_read(struct wl1251 *wl, int addr, void *buf,
static void wl1251_spi_write(struct wl1251 *wl, int addr, void *buf,
size_t len)
{
+ struct wl1251_spi *wl_spi = wl->if_priv;
struct spi_transfer t[2];
struct spi_message m;
u32 *cmd;
@@ -190,7 +194,7 @@ static void wl1251_spi_write(struct wl1251 *wl, int addr, void *buf,
t[1].len = len;
spi_message_add_tail(&t[1], &m);
- spi_sync(wl_to_spi(wl), &m);
+ spi_sync(wl_spi->spi, &m);
wl1251_dump(DEBUG_SPI, "spi_write cmd -> ", cmd, sizeof(*cmd));
wl1251_dump(DEBUG_SPI, "spi_write buf -> ", buf, len);
@@ -208,8 +212,10 @@ static void wl1251_spi_disable_irq(struct wl1251 *wl)
static int wl1251_spi_set_power(struct wl1251 *wl, bool enable)
{
- if (gpio_is_valid(wl->power_gpio))
- gpio_set_value(wl->power_gpio, enable);
+ struct wl1251_spi *wl_spi = wl->if_priv;
+
+ if (wl_spi->power_gpio)
+ gpiod_set_value_cansleep(wl_spi->power_gpio, enable);
return 0;
}
@@ -227,12 +233,19 @@ static int wl1251_spi_probe(struct spi_device *spi)
{
struct device_node *np = spi->dev.of_node;
struct ieee80211_hw *hw;
+ struct wl1251_spi *wl_spi;
struct wl1251 *wl;
int ret;
if (!np)
return -ENODEV;
+ wl_spi = devm_kzalloc(&spi->dev, sizeof(*wl_spi), GFP_KERNEL);
+ if (!wl_spi)
+ return -ENOMEM;
+
+ wl_spi->spi = spi;
+
hw = wl1251_alloc_hw();
if (IS_ERR(hw))
return PTR_ERR(hw);
@@ -241,7 +254,7 @@ static int wl1251_spi_probe(struct spi_device *spi)
SET_IEEE80211_DEV(hw, &spi->dev);
spi_set_drvdata(spi, wl);
- wl->if_priv = spi;
+ wl->if_priv = wl_spi;
wl->if_ops = &wl1251_spi_ops;
/* This is the only SPI value that we need to set here, the rest
@@ -257,25 +270,17 @@ static int wl1251_spi_probe(struct spi_device *spi)
wl->use_eeprom = of_property_read_bool(np, "ti,wl1251-has-eeprom");
- wl->power_gpio = of_get_named_gpio(np, "ti,power-gpio", 0);
- if (wl->power_gpio == -EPROBE_DEFER) {
- ret = -EPROBE_DEFER;
- goto out_free;
- }
-
- if (gpio_is_valid(wl->power_gpio)) {
- ret = devm_gpio_request_one(&spi->dev, wl->power_gpio,
- GPIOF_OUT_INIT_LOW, "wl1251 power");
- if (ret) {
+ wl_spi->power_gpio = devm_gpiod_get(&spi->dev, "ti,power",
+ GPIOD_OUT_LOW);
+ ret = PTR_ERR_OR_ZERO(wl_spi->power_gpio);
+ if (ret) {
+ if (ret != -EPROBE_DEFER)
wl1251_error("Failed to request gpio: %d\n", ret);
- goto out_free;
- }
- } else {
- wl1251_error("set power gpio missing in platform data");
- ret = -ENODEV;
goto out_free;
}
+ gpiod_set_consumer_name(wl_spi->power_gpio, "wl1251 power");
+
wl->irq = spi->irq;
if (wl->irq < 0) {
wl1251_error("irq missing in platform data");
diff --git a/drivers/net/wireless/ti/wl1251/wl1251.h b/drivers/net/wireless/ti/wl1251/wl1251.h
index 23ae07dd4c2e..83adbc3c25dc 100644
--- a/drivers/net/wireless/ti/wl1251/wl1251.h
+++ b/drivers/net/wireless/ti/wl1251/wl1251.h
@@ -262,7 +262,6 @@ struct wl1251 {
void *if_priv;
const struct wl1251_if_operations *if_ops;
- int power_gpio;
int irq;
bool use_eeprom;
--
2.38.0.rc1.362.ged0d419d3c-goog
next prev parent reply other threads:[~2022-09-28 22:22 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-28 22:22 [PATCH 1/2] wifi: wl1251: drop support for platform data Dmitry Torokhov
2022-09-28 22:22 ` Dmitry Torokhov [this message]
2022-10-04 7:16 ` [PATCH 2/2] wireless: wl1251: switch to using gpiod API Kalle Valo
2022-09-29 1:44 ` [PATCH 1/2] wifi: wl1251: drop support for platform data kernel test robot
2022-09-29 8:31 ` kernel test robot
2022-09-29 15:04 ` Dmitry Torokhov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220928222210.1922758-2-dmitry.torokhov@gmail.com \
--to=dmitry.torokhov@gmail.com \
--cc=kvalo@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox