[PATCH v2 05/11] phy: qcom-qmp-pcie: move power-down update

[Johan Hovold <johan+linaro@kernel.org>]

Move the power-down-control register update that powers on the PHY to
the power-on handler so that it matches the power-off handler.

Note that the power-on handler is currently always called directly
after init.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
index efffb77e8f45..db78d2d76c03 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
@@ -1862,7 +1862,6 @@ static int qmp_pcie_init(struct phy *phy)
 	struct qmp_phy *qphy = phy_get_drvdata(phy);
 	struct qcom_qmp *qmp = qphy->qmp;
 	const struct qmp_phy_cfg *cfg = qphy->cfg;
-	void __iomem *pcs = qphy->pcs;
 	int ret;
 
 	/* turn on regulator supplies */
@@ -1888,9 +1887,6 @@ static int qmp_pcie_init(struct phy *phy)
 	if (ret)
 		goto err_assert_reset;
 
-	qphy_setbits(pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
-			cfg->pwrdn_ctrl);
-
 	return 0;
 
 err_assert_reset:
@@ -1929,6 +1925,9 @@ static int qmp_pcie_power_on(struct phy *phy)
 	unsigned int mask, val, ready;
 	int ret;
 
+	qphy_setbits(pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
+			cfg->pwrdn_ctrl);
+
 	qmp_pcie_serdes_init(qphy);
 
 	ret = clk_prepare_enable(qphy->pipe_clk);
-- 
2.35.1