From: Juergen Gross <jgross@suse.com>
To: linux-kernel@vger.kernel.org, x86@kernel.org
Cc: Juergen Gross <jgross@suse.com>,
Thomas Gleixner <tglx@linutronix.de>,
Ingo Molnar <mingo@redhat.com>, Borislav Petkov <bp@alien8.de>,
Dave Hansen <dave.hansen@linux.intel.com>,
"H. Peter Anvin" <hpa@zytor.com>
Subject: [PATCH v4 09/16] x86/mtrr: simplify mtrr_bp_init()
Date: Tue, 4 Oct 2022 10:10:16 +0200 [thread overview]
Message-ID: <20221004081023.32402-10-jgross@suse.com> (raw)
In-Reply-To: <20221004081023.32402-1-jgross@suse.com>
In case of the generic cache interface being used (Intel CPUs or a
64-bit system), the initialization sequence of the boot CPU is more
complicated as necessary:
- check if MTRR enabled, if yes, call mtrr_bp_pat_init() which will
disable caching, set the PAT MSR, and reenable caching
- call mtrr_cleanup(), in case that changed anything, call
cache_cpu_init() doing the same caching disable/enable dance as
above, but this time with setting the (modified) MTRR state (even
if MTRR was disabled) AND setting the PAT MSR (again even with
disabled MTRR)
The sequence can be simplified a lot while removing potential
inconsistencies:
- check if MTRR enabled, if yes, call mtrr_cleanup() and then
cache_cpu_init()
This ensures to:
- no longer disable/enable caching more than once
- avoid to set MTRRs and/or the PAT MSR on the boot processor in case
of MTRR cleanups even if MTRRs meant to be disabled
With that mtrr_bp_pat_init() can be removed.
Signed-off-by: Juergen Gross <jgross@suse.com>
---
V2:
- new patch
---
arch/x86/kernel/cpu/mtrr/generic.c | 14 --------------
arch/x86/kernel/cpu/mtrr/mtrr.c | 6 +-----
arch/x86/kernel/cpu/mtrr/mtrr.h | 1 -
3 files changed, 1 insertion(+), 20 deletions(-)
diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c
index af8422c96b92..2f2485d6657f 100644
--- a/arch/x86/kernel/cpu/mtrr/generic.c
+++ b/arch/x86/kernel/cpu/mtrr/generic.c
@@ -442,20 +442,6 @@ static void __init print_mtrr_state(void)
pr_debug("TOM2: %016llx aka %lldM\n", mtrr_tom2, mtrr_tom2>>20);
}
-/* PAT setup for BP. We need to go through sync steps here */
-void __init mtrr_bp_pat_init(void)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- cache_disable();
-
- pat_init();
-
- cache_enable();
- local_irq_restore(flags);
-}
-
/* Grab all of the MTRR state for this CPU into *state */
bool __init get_mtrr_state(void)
{
diff --git a/arch/x86/kernel/cpu/mtrr/mtrr.c b/arch/x86/kernel/cpu/mtrr/mtrr.c
index 501ca1747d55..9e1b478ac896 100644
--- a/arch/x86/kernel/cpu/mtrr/mtrr.c
+++ b/arch/x86/kernel/cpu/mtrr/mtrr.c
@@ -759,12 +759,8 @@ void __init mtrr_bp_init(void)
mtrr_enabled = get_mtrr_state();
if (mtrr_enabled) {
- mtrr_bp_pat_init();
memory_caching_control |= CACHE_MTRR | CACHE_PAT;
- }
-
- if (mtrr_cleanup(phys_addr)) {
- changed_by_mtrr_cleanup = 1;
+ changed_by_mtrr_cleanup = mtrr_cleanup(phys_addr);
cache_cpu_init();
}
}
diff --git a/arch/x86/kernel/cpu/mtrr/mtrr.h b/arch/x86/kernel/cpu/mtrr/mtrr.h
index 3b1883185185..c98928ceee6a 100644
--- a/arch/x86/kernel/cpu/mtrr/mtrr.h
+++ b/arch/x86/kernel/cpu/mtrr/mtrr.h
@@ -50,7 +50,6 @@ void set_mtrr_prepare_save(struct set_mtrr_context *ctxt);
void fill_mtrr_var_range(unsigned int index,
u32 base_lo, u32 base_hi, u32 mask_lo, u32 mask_hi);
bool get_mtrr_state(void);
-void mtrr_bp_pat_init(void);
extern void __init set_mtrr_ops(const struct mtrr_ops *ops);
--
2.35.3
next prev parent reply other threads:[~2022-10-04 8:12 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-04 8:10 [PATCH v4 00/16] x86: make pat and mtrr independent from each other Juergen Gross
2022-10-04 8:10 ` [PATCH v4 01/16] x86/mtrr: add comment for set_mtrr_state() serialization Juergen Gross
2022-10-04 8:10 ` [PATCH v4 02/16] x86/mtrr: remove unused cyrix_set_all() function Juergen Gross
2022-10-20 14:13 ` [tip: x86/cpu] x86/mtrr: Remove " tip-bot2 for Juergen Gross
2022-10-04 8:10 ` [PATCH v4 03/16] x86/mtrr: replace use_intel() with a local flag Juergen Gross
2022-10-21 17:19 ` Borislav Petkov
2022-10-21 18:05 ` Juergen Gross
2022-10-21 18:10 ` Borislav Petkov
2022-10-04 8:10 ` [PATCH v4 04/16] x86/mtrr: rename prepare_set() and post_set() Juergen Gross
2022-10-04 8:10 ` [PATCH v4 05/16] x86/mtrr: split MTRR specific handling from cache dis/enabling Juergen Gross
2022-10-26 9:24 ` Borislav Petkov
2022-10-26 11:42 ` Juergen Gross
2022-10-04 8:10 ` [PATCH v4 06/16] x86: move some code out of arch/x86/kernel/cpu/mtrr Juergen Gross
2022-10-04 8:10 ` [PATCH v4 07/16] x86/mtrr: split generic_set_all() Juergen Gross
2022-10-26 10:37 ` Borislav Petkov
2022-10-26 11:43 ` Juergen Gross
2022-10-26 12:10 ` Borislav Petkov
2022-10-04 8:10 ` [PATCH v4 08/16] x86/mtrr: remove set_all callback from struct mtrr_ops Juergen Gross
2022-10-27 9:18 ` Borislav Petkov
2022-10-04 8:10 ` Juergen Gross [this message]
2022-10-27 9:32 ` [PATCH v4 09/16] x86/mtrr: simplify mtrr_bp_init() Borislav Petkov
2022-10-04 8:10 ` [PATCH v4 10/16] x86/mtrr: get rid of mtrr_enabled bool Juergen Gross
2022-10-04 8:10 ` [PATCH v4 11/16] x86/mtrr: let cache_aps_delayed_init replace mtrr_aps_delayed_init Juergen Gross
2022-10-27 12:18 ` Borislav Petkov
2022-10-27 13:08 ` Juergen Gross
2022-10-04 8:10 ` [PATCH v4 12/16] x86/mtrr: add a stop_machine() handler calling only cache_cpu_init() Juergen Gross
2022-10-29 10:07 ` Borislav Petkov
2022-10-04 8:10 ` [PATCH v4 13/16] x86: decouple pat and mtrr handling Juergen Gross
2022-10-29 12:15 ` Borislav Petkov
2022-10-04 8:10 ` [PATCH v4 14/16] x86: switch cache_ap_init() to hotplug callback Juergen Gross
2022-10-04 8:10 ` [PATCH v4 15/16] x86: do MTRR/PAT setup on all secondary CPUs in parallel Juergen Gross
2022-10-04 8:10 ` [PATCH v4 16/16] x86/mtrr: simplify mtrr_ops initialization Juergen Gross
2022-10-30 12:06 ` Borislav Petkov
2022-10-30 15:05 ` Juergen Gross
2022-10-30 16:39 ` Borislav Petkov
2022-10-30 17:48 ` Borislav Petkov
2022-11-01 9:48 ` Juergen Gross
2022-11-01 10:02 ` Borislav Petkov
2022-10-19 7:18 ` [PATCH v4 00/16] x86: make pat and mtrr independent from each other Juergen Gross
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221004081023.32402-10-jgross@suse.com \
--to=jgross@suse.com \
--cc=bp@alien8.de \
--cc=dave.hansen@linux.intel.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=tglx@linutronix.de \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox