From: Vidya Sagar <vidyas@nvidia.com>
To: <lpieralisi@kernel.org>, <robh@kernel.org>, <kw@linux.com>,
<bhelgaas@google.com>, <thierry.reding@gmail.com>,
<jonathanh@nvidia.com>, <kishon@ti.com>, <vkoul@kernel.org>,
<mani@kernel.org>, <Sergey.Semin@baikalelectronics.ru>,
<ffclaire1224@gmail.com>
Cc: <linux-pci@vger.kernel.org>, <linux-tegra@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <linux-phy@lists.infradead.org>,
<kthota@nvidia.com>, <mmaddireddy@nvidia.com>,
<vidyas@nvidia.com>, <sagar.tv@gmail.com>
Subject: [PATCH V3 00/21] Enhancements to pcie-tegra194 driver
Date: Fri, 14 Oct 2022 00:08:33 +0530 [thread overview]
Message-ID: <20221013183854.21087-1-vidyas@nvidia.com> (raw)
This patch series contains enhancements to the pcie-tegra194.c driver
that works for both Tegra194 and Tegra234 SoCs and for both RootPort
and Endpoint modes.
This patch series depends on the following series in the same order
PCI: designware-ep: Fix DBI access before core init
https://patchwork.ozlabs.org/project/linux-pci/list/?series=322681
PCI: endpoint: Rework the EPC to EPF notification
https://patchwork.kernel.org/project/linux-pci/list/?series=683493
Add DeInit support in the PCIe Endpoint framework
https://patchwork.kernel.org/project/linux-pci/list/?series=685157
V3:
* Addressed review comments from Bjorn
* Added new patches to the series
V2:
* Addressed review comments from test bot and Vinod
Vidya Sagar (21):
PCI: tegra194: Use devm_gpiod_get_optional() to parse
"nvidia,refclk-select"
PCI: tegra194: Drive CLKREQ signal low explicitly
PCI: tegra194: Fix polling delay for L2 state
PCI: tegra194: Handle errors in BPMP response
PCI: tegra194: Apply pinctrl settings for both PCIe RP and EP
PCI: tegra194: Refactor LTSSM state polling on surprise down
PCI: tegra194: Disable direct speed change for EP
phy: tegra: p2u: Set ENABLE_L2_EXIT_RATE_CHANGE in calibration
PCI: tegra194: Calibrate P2U for endpoint mode
PCI: tegra194: Free resources during controller deinitialization
PCI: tegra194: Remove IRQF_ONESHOT flag during Endpoint interrupt
registration
PCI: tegra194: Enable DMA interrupt
PCI: tegra194: Enable hardware hot reset mode in Endpoint
PCI: tegra194: Allow system suspend when the Endpoint link is not up
PCI: tegra194: Disable L1.2 capability of Tegra234 EP
PCI: tegra194: Set LTR message request before PCIe link up
PCI: tegra194: Reduce AXI slave timeout value
PCI: tegra194: Don't force the device into the D0 state before L2
PCI: tegra194: Free up EP resources during remove()
dt-bindings: PCI: tegra194: Add monitor clock support
PCI: tegra194: Add core monitor clock support
.../bindings/pci/nvidia,tegra194-pcie-ep.yaml | 6 +-
.../bindings/pci/nvidia,tegra194-pcie.yaml | 6 +-
drivers/pci/controller/dwc/pcie-tegra194.c | 261 ++++++++++++------
drivers/phy/tegra/phy-tegra194-p2u.c | 14 +
4 files changed, 194 insertions(+), 93 deletions(-)
--
2.17.1
next reply other threads:[~2022-10-13 18:44 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-13 18:38 Vidya Sagar [this message]
2022-10-13 18:38 ` [PATCH V3 01/21] PCI: tegra194: Use devm_gpiod_get_optional() to parse "nvidia,refclk-select" Vidya Sagar
2022-10-13 18:38 ` [PATCH V3 02/21] PCI: tegra194: Drive CLKREQ signal low explicitly Vidya Sagar
2022-10-13 18:38 ` [PATCH V3 03/21] PCI: tegra194: Fix polling delay for L2 state Vidya Sagar
2022-10-13 18:38 ` [PATCH V3 04/21] PCI: tegra194: Handle errors in BPMP response Vidya Sagar
2023-01-13 15:15 ` Lorenzo Pieralisi
2022-10-13 18:38 ` [PATCH V3 05/21] PCI: tegra194: Apply pinctrl settings for both PCIe RP and EP Vidya Sagar
2022-10-13 18:38 ` [PATCH V3 06/21] PCI: tegra194: Refactor LTSSM state polling on surprise down Vidya Sagar
2022-10-13 18:38 ` [PATCH V3 07/21] PCI: tegra194: Disable direct speed change for EP Vidya Sagar
2022-10-13 18:38 ` [PATCH V3 08/21] phy: tegra: p2u: Set ENABLE_L2_EXIT_RATE_CHANGE in calibration Vidya Sagar
2022-10-28 11:42 ` Vinod Koul
2022-10-28 11:49 ` Vidya Sagar
2022-10-28 12:13 ` Vinod Koul
2022-10-13 18:38 ` [PATCH V3 09/21] PCI: tegra194: Calibrate P2U for endpoint mode Vidya Sagar
2022-10-13 18:38 ` [PATCH V3 10/21] PCI: tegra194: Free resources during controller deinitialization Vidya Sagar
2022-10-13 18:38 ` [PATCH V3 11/21] PCI: tegra194: Remove IRQF_ONESHOT flag during Endpoint interrupt registration Vidya Sagar
2022-11-14 11:56 ` Lorenzo Pieralisi
2023-01-13 15:21 ` Lorenzo Pieralisi
2022-10-13 18:38 ` [PATCH V3 12/21] PCI: tegra194: Enable DMA interrupt Vidya Sagar
2022-10-13 18:38 ` [PATCH V3 13/21] PCI: tegra194: Enable hardware hot reset mode in Endpoint Vidya Sagar
2022-10-13 18:38 ` [PATCH V3 14/21] PCI: tegra194: Allow system suspend when the Endpoint link is not up Vidya Sagar
2022-10-13 18:38 ` [PATCH V3 15/21] PCI: tegra194: Disable L1.2 capability of Tegra234 EP Vidya Sagar
2022-10-13 18:38 ` [PATCH V3 16/21] PCI: tegra194: Set LTR message request before PCIe link up Vidya Sagar
2022-10-13 18:38 ` [PATCH V3 17/21] PCI: tegra194: Reduce AXI slave timeout value Vidya Sagar
2023-01-13 15:31 ` Lorenzo Pieralisi
2022-10-13 18:38 ` [PATCH V3 18/21] PCI: tegra194: Don't force the device into the D0 state before L2 Vidya Sagar
2022-10-13 18:38 ` [PATCH V3 19/21] PCI: tegra194: Free up EP resources during remove() Vidya Sagar
2023-01-13 15:28 ` Lorenzo Pieralisi
2022-10-13 18:38 ` [PATCH V3 20/21] dt-bindings: PCI: tegra194: Add monitor clock support Vidya Sagar
2022-10-13 18:38 ` [PATCH V3 21/21] PCI: tegra194: Add core " Vidya Sagar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221013183854.21087-1-vidyas@nvidia.com \
--to=vidyas@nvidia.com \
--cc=Sergey.Semin@baikalelectronics.ru \
--cc=bhelgaas@google.com \
--cc=ffclaire1224@gmail.com \
--cc=jonathanh@nvidia.com \
--cc=kishon@ti.com \
--cc=kthota@nvidia.com \
--cc=kw@linux.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-tegra@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=mani@kernel.org \
--cc=mmaddireddy@nvidia.com \
--cc=robh@kernel.org \
--cc=sagar.tv@gmail.com \
--cc=thierry.reding@gmail.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox