[PATCH 01/10] arm64: dts: ti: k3-am64: Enable UART nodes at the board level

[Andrew Davis <afd@ti.com>]

UART nodes defined in the top-level AM64x SoC dtsi files are incomplete
and will not be functional unless they are extended with pinmux
information.

As the pinmux is only known at the board integration level, these
nodes should only be enabled when provided with this information.

Disable the UART nodes in the dtsi files and only enable the ones that
are actually pinned out on a given board.

Signed-off-by: Andrew Davis <afd@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am64-main.dtsi |  7 ++++++
 arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi  |  2 ++
 arch/arm64/boot/dts/ti/k3-am642-evm.dts  | 29 +-----------------------
 arch/arm64/boot/dts/ti/k3-am642-sk.dts   | 29 +-----------------------
 4 files changed, 11 insertions(+), 56 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
index d6aa23681bbe..a115c668d001 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
@@ -237,6 +237,7 @@ main_uart0: serial@2800000 {
 		power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 146 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart1: serial@2810000 {
@@ -248,6 +249,7 @@ main_uart1: serial@2810000 {
 		power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 152 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart2: serial@2820000 {
@@ -259,6 +261,7 @@ main_uart2: serial@2820000 {
 		power-domains = <&k3_pds 153 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 153 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart3: serial@2830000 {
@@ -270,6 +273,7 @@ main_uart3: serial@2830000 {
 		power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 154 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart4: serial@2840000 {
@@ -281,6 +285,7 @@ main_uart4: serial@2840000 {
 		power-domains = <&k3_pds 155 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 155 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart5: serial@2850000 {
@@ -292,6 +297,7 @@ main_uart5: serial@2850000 {
 		power-domains = <&k3_pds 156 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 156 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart6: serial@2860000 {
@@ -303,6 +309,7 @@ main_uart6: serial@2860000 {
 		power-domains = <&k3_pds 158 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 158 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_i2c0: i2c@20000000 {
diff --git a/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
index 02d4285acbb8..1181ad017626 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
@@ -14,6 +14,7 @@ mcu_uart0: serial@4a00000 {
 		power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 149 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	mcu_uart1: serial@4a10000 {
@@ -24,6 +25,7 @@ mcu_uart1: serial@4a10000 {
 		power-domains = <&k3_pds 160 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 160 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	mcu_i2c0: i2c@4900000 {
diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
index 5cf913860f80..78f246077ca9 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
@@ -325,6 +325,7 @@ AM64X_IOPAD(0x0258, PIN_OUTPUT, 0) /* (C17) MCAN1_TX */
 };
 
 &main_uart0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart0_pins_default>;
 };
@@ -334,34 +335,6 @@ &main_uart1 {
 	status = "reserved";
 };
 
-&main_uart2 {
-	status = "disabled";
-};
-
-&main_uart3 {
-	status = "disabled";
-};
-
-&main_uart4 {
-	status = "disabled";
-};
-
-&main_uart5 {
-	status = "disabled";
-};
-
-&main_uart6 {
-	status = "disabled";
-};
-
-&mcu_uart0 {
-	status = "disabled";
-};
-
-&mcu_uart1 {
-	status = "disabled";
-};
-
 &main_i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c1_pins_default>;
diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
index 738d0cf6c40a..8423295150fc 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
@@ -338,15 +338,8 @@ AM64X_IOPAD(0x00bc, PIN_INPUT, 7) /* (U8) GPIO0_46 */
 	};
 };
 
-&mcu_uart0 {
-	status = "disabled";
-};
-
-&mcu_uart1 {
-	status = "disabled";
-};
-
 &main_uart0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart0_pins_default>;
 };
@@ -356,26 +349,6 @@ &main_uart1 {
 	status = "reserved";
 };
 
-&main_uart2 {
-	status = "disabled";
-};
-
-&main_uart3 {
-	status = "disabled";
-};
-
-&main_uart4 {
-	status = "disabled";
-};
-
-&main_uart5 {
-	status = "disabled";
-};
-
-&main_uart6 {
-	status = "disabled";
-};
-
 &mcu_i2c0 {
 	status = "disabled";
 };
-- 
2.37.3