From: Eli Cohen <elic@nvidia.com>
To: <mst@redhat.com>, <jasowang@redhat.com>,
<linux-kernel@vger.kernel.org>,
<virtualization@lists.linux-foundation.org>
Cc: <si-wei.liu@oracle.com>, <eperezma@redhat.com>, <lulu@redhat.com>,
"Eli Cohen" <elic@nvidia.com>
Subject: [PATCH 2/4] vdpa/mlx5: Move some definitions to a new header file
Date: Tue, 18 Oct 2022 14:12:30 +0300 [thread overview]
Message-ID: <20221018111232.4021-3-elic@nvidia.com> (raw)
In-Reply-To: <20221018111232.4021-1-elic@nvidia.com>
Move some definitions from mlx5_vnet.c to newly added header file
mlx5_vnet.h. We need these definitions for the following patches that
add debugfs tree to expose information vital for debug.
Signed-off-by: Eli Cohen <elic@nvidia.com>
---
drivers/vdpa/mlx5/net/mlx5_vnet.c | 45 +------------------------
drivers/vdpa/mlx5/net/mlx5_vnet.h | 55 +++++++++++++++++++++++++++++++
2 files changed, 56 insertions(+), 44 deletions(-)
create mode 100644 drivers/vdpa/mlx5/net/mlx5_vnet.h
diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c b/drivers/vdpa/mlx5/net/mlx5_vnet.c
index dd29fdfc24ed..64fdb940380f 100644
--- a/drivers/vdpa/mlx5/net/mlx5_vnet.c
+++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c
@@ -18,15 +18,12 @@
#include <linux/mlx5/mlx5_ifc_vdpa.h>
#include <linux/mlx5/mpfs.h>
#include "mlx5_vdpa.h"
+#include "mlx5_vnet.h"
MODULE_AUTHOR("Eli Cohen <eli@mellanox.com>");
MODULE_DESCRIPTION("Mellanox VDPA driver");
MODULE_LICENSE("Dual BSD/GPL");
-#define to_mlx5_vdpa_ndev(__mvdev) \
- container_of(__mvdev, struct mlx5_vdpa_net, mvdev)
-#define to_mvdev(__vdev) container_of((__vdev), struct mlx5_vdpa_dev, vdev)
-
#define VALID_FEATURES_MASK \
(BIT_ULL(VIRTIO_NET_F_CSUM) | BIT_ULL(VIRTIO_NET_F_GUEST_CSUM) | \
BIT_ULL(VIRTIO_NET_F_CTRL_GUEST_OFFLOADS) | BIT_ULL(VIRTIO_NET_F_MTU) | BIT_ULL(VIRTIO_NET_F_MAC) | \
@@ -50,14 +47,6 @@ MODULE_LICENSE("Dual BSD/GPL");
#define MLX5V_UNTAGGED 0x1000
-struct mlx5_vdpa_net_resources {
- u32 tisn;
- u32 tdn;
- u32 tirn;
- u32 rqtn;
- bool valid;
-};
-
struct mlx5_vdpa_cq_buf {
struct mlx5_frag_buf_ctrl fbc;
struct mlx5_frag_buf frag_buf;
@@ -146,38 +135,6 @@ static bool is_index_valid(struct mlx5_vdpa_dev *mvdev, u16 idx)
return idx <= mvdev->max_idx;
}
-#define MLX5V_MACVLAN_SIZE 256
-
-struct mlx5_vdpa_net {
- struct mlx5_vdpa_dev mvdev;
- struct mlx5_vdpa_net_resources res;
- struct virtio_net_config config;
- struct mlx5_vdpa_virtqueue *vqs;
- struct vdpa_callback *event_cbs;
-
- /* Serialize vq resources creation and destruction. This is required
- * since memory map might change and we need to destroy and create
- * resources while driver in operational.
- */
- struct rw_semaphore reslock;
- struct mlx5_flow_table *rxft;
- bool setup;
- u32 cur_num_vqs;
- u32 rqt_size;
- bool nb_registered;
- struct notifier_block nb;
- struct vdpa_callback config_cb;
- struct mlx5_vdpa_wq_ent cvq_ent;
- struct hlist_head macvlan_hash[MLX5V_MACVLAN_SIZE];
-};
-
-struct macvlan_node {
- struct hlist_node hlist;
- struct mlx5_flow_handle *ucast_rule;
- struct mlx5_flow_handle *mcast_rule;
- u64 macvlan;
-};
-
static void free_resources(struct mlx5_vdpa_net *ndev);
static void init_mvqs(struct mlx5_vdpa_net *ndev);
static int setup_driver(struct mlx5_vdpa_dev *mvdev);
diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.h b/drivers/vdpa/mlx5/net/mlx5_vnet.h
new file mode 100644
index 000000000000..6691c879a6ca
--- /dev/null
+++ b/drivers/vdpa/mlx5/net/mlx5_vnet.h
@@ -0,0 +1,55 @@
+/* SPDX-License-Identifier: GPL-2.0 OR Linux-OpenIB */
+/* Copyright (c) 2022, NVIDIA CORPORATION & AFFILIATES. All rights reserved. */
+
+#ifndef __MLX5_VNET_H__
+#define __MLX5_VNET_H__
+
+#include "mlx5_vdpa.h"
+
+#define to_mlx5_vdpa_ndev(__mvdev) \
+ container_of(__mvdev, struct mlx5_vdpa_net, mvdev)
+#define to_mvdev(__vdev) container_of((__vdev), struct mlx5_vdpa_dev, vdev)
+
+struct mlx5_vdpa_net_resources {
+ u32 tisn;
+ u32 tdn;
+ u32 tirn;
+ u32 rqtn;
+ bool valid;
+};
+
+#define MLX5V_MACVLAN_SIZE 256
+
+struct mlx5_vdpa_net {
+ struct mlx5_vdpa_dev mvdev;
+ struct mlx5_vdpa_net_resources res;
+ struct virtio_net_config config;
+ struct mlx5_vdpa_virtqueue *vqs;
+ struct vdpa_callback *event_cbs;
+
+ /* Serialize vq resources creation and destruction. This is required
+ * since memory map might change and we need to destroy and create
+ * resources while driver in operational.
+ */
+ struct rw_semaphore reslock;
+ struct mlx5_flow_table *rxft;
+ struct dentry *rx_dent;
+ struct dentry *rx_table_dent;
+ bool setup;
+ u32 cur_num_vqs;
+ u32 rqt_size;
+ bool nb_registered;
+ struct notifier_block nb;
+ struct vdpa_callback config_cb;
+ struct mlx5_vdpa_wq_ent cvq_ent;
+ struct hlist_head macvlan_hash[MLX5V_MACVLAN_SIZE];
+};
+
+struct macvlan_node {
+ struct hlist_node hlist;
+ struct mlx5_flow_handle *ucast_rule;
+ struct mlx5_flow_handle *mcast_rule;
+ u64 macvlan;
+};
+
+#endif /* __MLX5_VNET_H__ */
--
2.35.1
next prev parent reply other threads:[~2022-10-18 11:13 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-18 11:12 [PATCH 0/4] vdpa:/mlx5: Add debugfs subtree Eli Cohen
2022-10-18 11:12 ` [PATCH 1/4] vdpa/mlx5: Fix rule forwarding VLAN to TIR Eli Cohen
2022-10-18 19:20 ` Si-Wei Liu
2022-10-19 5:31 ` Eli Cohen
2022-10-19 5:34 ` Michael S. Tsirkin
2022-10-19 5:36 ` Eli Cohen
2022-10-19 5:39 ` Michael S. Tsirkin
2022-10-18 11:12 ` Eli Cohen [this message]
2022-10-18 11:12 ` [PATCH 3/4] vdpa/mlx5: Add debugfs subtree Eli Cohen
2022-10-18 19:52 ` Si-Wei Liu
2022-10-19 5:14 ` Jason Wang
2022-10-19 5:37 ` Eli Cohen
2022-10-19 6:07 ` Jason Wang
2022-10-18 11:12 ` [PATCH 4/4] vdpa/mlx5: Add RX counters to debugfs Eli Cohen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221018111232.4021-3-elic@nvidia.com \
--to=elic@nvidia.com \
--cc=eperezma@redhat.com \
--cc=jasowang@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lulu@redhat.com \
--cc=mst@redhat.com \
--cc=si-wei.liu@oracle.com \
--cc=virtualization@lists.linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox