Re: [PATCH v14 1/7] PCI: endpoint: pci-epf-vntb: Clean up kernel_doc warning

Manivannan Sadhasivam
2022-11-01T11:52:12Z

On Fri, Oct 28, 2022 at 11:56:57AM -0400, Frank Li wrote:
> From: Frank Li <frank.li@nxp.com>
>
> Cleanup warning found by scripts/kernel-doc
> Consolidate term
> host, host1 to HOST
> vhost, vHost, Vhost, VHOST2 to VHOST
>
> Signed-off-by: Frank Li <frank.li@nxp.com>

Acked-by: Manivannan Sadhasivam <mani@kernel.org>

Thanks,
Mani

> ---
> drivers/pci/endpoint/functions/pci-epf-vntb.c | 83 ++++++++++++-------
> 1 file changed, 54 insertions(+), 29 deletions(-)
>
> diff --git a/drivers/pci/endpoint/functions/pci-epf-vntb.c b/drivers/pci/endpoint/functions/pci-epf-vntb.c
> index 0ea85e1d292e..c0115bcb3b5e 100644
> --- a/drivers/pci/endpoint/functions/pci-epf-vntb.c
> +++ b/drivers/pci/endpoint/functions/pci-epf-vntb.c
> @@ -11,7 +11,7 @@
> * Author: Kishon Vijay Abraham I <kishon@ti.com>
> */
>
> -/**
> +/*
> * +------------+ +---------------------------------------+
> * | | | |
> * +------------+ | +--------------+
> @@ -156,12 +156,14 @@ static struct pci_epf_header epf_ntb_header = {
> };
>
> /**
> - * epf_ntb_link_up() - Raise link_up interrupt to Virtual Host
> + * epf_ntb_link_up() - Raise link_up interrupt to Virtual Host (VHOST)
> * @ntb: NTB device that facilitates communication between HOST and VHOST
> * @link_up: true or false indicating Link is UP or Down
> *
> * Once NTB function in HOST invoke ntb_link_enable(),
> - * this NTB function driver will trigger a link event to vhost.
> + * this NTB function driver will trigger a link event to VHOST.
> + *
> + * Returns: Zero for success, or an error code in case of failure
> */
> static int epf_ntb_link_up(struct epf_ntb *ntb, bool link_up)
> {
> @@ -175,9 +177,9 @@ static int epf_ntb_link_up(struct epf_ntb *ntb, bool link_up)
> }
>
> /**
> - * epf_ntb_configure_mw() - Configure the Outbound Address Space for vhost
> - * to access the memory window of host
> - * @ntb: NTB device that facilitates communication between host and vhost
> + * epf_ntb_configure_mw() - Configure the Outbound Address Space for VHOST
> + * to access the memory window of HOST
> + * @ntb: NTB device that facilitates communication between HOST and VHOST
> * @mw: Index of the memory window (either 0, 1, 2 or 3)
> *
> * EP Outbound Window
> @@ -194,7 +196,9 @@ static int epf_ntb_link_up(struct epf_ntb *ntb, bool link_up)
> * | | | |
> * | | | |
> * +--------+ +-----------+
> - * VHost PCI EP
> + * VHOST PCI EP
> + *
> + * Returns: Zero for success, or an error code in case of failure
> */
> static int epf_ntb_configure_mw(struct epf_ntb *ntb, u32 mw)
> {
> @@ -219,7 +223,7 @@ static int epf_ntb_configure_mw(struct epf_ntb *ntb, u32 mw)
>
> /**
> * epf_ntb_teardown_mw() - Teardown the configured OB ATU
> - * @ntb: NTB device that facilitates communication between HOST and vHOST
> + * @ntb: NTB device that facilitates communication between HOST and VHOST
> * @mw: Index of the memory window (either 0, 1, 2 or 3)
> *
> * Teardown the configured OB ATU configured in epf_ntb_configure_mw() using
> @@ -234,12 +238,12 @@ static void epf_ntb_teardown_mw(struct epf_ntb *ntb, u32 mw)
> }
>
> /**
> - * epf_ntb_cmd_handler() - Handle commands provided by the NTB Host
> + * epf_ntb_cmd_handler() - Handle commands provided by the NTB HOST
> * @work: work_struct for the epf_ntb_epc
> *
> * Workqueue function that gets invoked for the two epf_ntb_epc
> * periodically (once every 5ms) to see if it has received any commands
> - * from NTB host. The host can send commands to configure doorbell or
> + * from NTB HOST. The HOST can send commands to configure doorbell or
> * configure memory window or to update link status.
> */
> static void epf_ntb_cmd_handler(struct work_struct *work)
> @@ -321,8 +325,8 @@ static void epf_ntb_cmd_handler(struct work_struct *work)
>
> /**
> * epf_ntb_config_sspad_bar_clear() - Clear Config + Self scratchpad BAR
> - * @ntb_epc: EPC associated with one of the HOST which holds peer's outbound
> - * address.
> + * @ntb: EPC associated with one of the HOST which holds peer's outbound
> + * address.
> *
> * Clear BAR0 of EP CONTROLLER 1 which contains the HOST1's config and
> * self scratchpad region (removes inbound ATU configuration). While BAR0 is
> @@ -331,8 +335,10 @@ static void epf_ntb_cmd_handler(struct work_struct *work)
> * used for self scratchpad from epf_ntb_bar[BAR_CONFIG].
> *
> * Please note the self scratchpad region and config region is combined to
> - * a single region and mapped using the same BAR. Also note HOST2's peer
> - * scratchpad is HOST1's self scratchpad.
> + * a single region and mapped using the same BAR. Also note VHOST's peer
> + * scratchpad is HOST's self scratchpad.
> + *
> + * Returns: void
> */
> static void epf_ntb_config_sspad_bar_clear(struct epf_ntb *ntb)
> {
> @@ -347,13 +353,15 @@ static void epf_ntb_config_sspad_bar_clear(struct epf_ntb *ntb)
>
> /**
> * epf_ntb_config_sspad_bar_set() - Set Config + Self scratchpad BAR
> - * @ntb: NTB device that facilitates communication between HOST and vHOST
> + * @ntb: NTB device that facilitates communication between HOST and VHOST
> *
> - * Map BAR0 of EP CONTROLLER 1 which contains the HOST1's config and
> + * Map BAR0 of EP CONTROLLER which contains the VHOST's config and
> * self scratchpad region.
> *
> * Please note the self scratchpad region and config region is combined to
> * a single region and mapped using the same BAR.
> + *
> + * Returns: Zero for success, or an error code in case of failure
> */
> static int epf_ntb_config_sspad_bar_set(struct epf_ntb *ntb)
> {
> @@ -380,7 +388,7 @@ static int epf_ntb_config_sspad_bar_set(struct epf_ntb *ntb)
> /**
> * epf_ntb_config_spad_bar_free() - Free the physical memory associated with
> * config + scratchpad region
> - * @ntb: NTB device that facilitates communication between HOST and vHOST
> + * @ntb: NTB device that facilitates communication between HOST and VHOST
> */
> static void epf_ntb_config_spad_bar_free(struct epf_ntb *ntb)
> {
> @@ -393,11 +401,13 @@ static void epf_ntb_config_spad_bar_free(struct epf_ntb *ntb)
> /**
> * epf_ntb_config_spad_bar_alloc() - Allocate memory for config + scratchpad
> * region
> - * @ntb: NTB device that facilitates communication between HOST1 and HOST2
> + * @ntb: NTB device that facilitates communication between HOST and VHOST
> *
> * Allocate the Local Memory mentioned in the above diagram. The size of
> * CONFIG REGION is sizeof(struct epf_ntb_ctrl) and size of SCRATCHPAD REGION
> * is obtained from "spad-count" configfs entry.
> + *
> + * Returns: Zero for success, or an error code in case of failure
> */
> static int epf_ntb_config_spad_bar_alloc(struct epf_ntb *ntb)
> {
> @@ -465,11 +475,13 @@ static int epf_ntb_config_spad_bar_alloc(struct epf_ntb *ntb)
> }
>
> /**
> - * epf_ntb_configure_interrupt() - Configure MSI/MSI-X capaiblity
> - * @ntb: NTB device that facilitates communication between HOST and vHOST
> + * epf_ntb_configure_interrupt() - Configure MSI/MSI-X capability
> + * @ntb: NTB device that facilitates communication between HOST and VHOST
> *
> * Configure MSI/MSI-X capability for each interface with number of
> * interrupts equal to "db_count" configfs entry.
> + *
> + * Returns: Zero for success, or an error code in case of failure
> */
> static int epf_ntb_configure_interrupt(struct epf_ntb *ntb)
> {
> @@ -511,7 +523,9 @@ static int epf_ntb_configure_interrupt(struct epf_ntb *ntb)
>
> /**
> * epf_ntb_db_bar_init() - Configure Doorbell window BARs
> - * @ntb: NTB device that facilitates communication between HOST and vHOST
> + * @ntb: NTB device that facilitates communication between HOST and VHOST
> + *
> + * Returns: Zero for success, or an error code in case of failure
> */
> static int epf_ntb_db_bar_init(struct epf_ntb *ntb)
> {
> @@ -566,7 +580,7 @@ static void epf_ntb_mw_bar_clear(struct epf_ntb *ntb, int num_mws);
> /**
> * epf_ntb_db_bar_clear() - Clear doorbell BAR and free memory
> * allocated in peer's outbound address space
> - * @ntb: NTB device that facilitates communication between HOST and vHOST
> + * @ntb: NTB device that facilitates communication between HOST and VHOST
> */
> static void epf_ntb_db_bar_clear(struct epf_ntb *ntb)
> {
> @@ -582,8 +596,9 @@ static void epf_ntb_db_bar_clear(struct epf_ntb *ntb)
>
> /**
> * epf_ntb_mw_bar_init() - Configure Memory window BARs
> - * @ntb: NTB device that facilitates communication between HOST and vHOST
> + * @ntb: NTB device that facilitates communication between HOST and VHOST
> *
> + * Returns: Zero for success, or an error code in case of failure
> */
> static int epf_ntb_mw_bar_init(struct epf_ntb *ntb)
> {
> @@ -639,7 +654,7 @@ static int epf_ntb_mw_bar_init(struct epf_ntb *ntb)
>
> /**
> * epf_ntb_mw_bar_clear() - Clear Memory window BARs
> - * @ntb: NTB device that facilitates communication between HOST and vHOST
> + * @ntb: NTB device that facilitates communication between HOST and VHOST
> */
> static void epf_ntb_mw_bar_clear(struct epf_ntb *ntb, int num_mws)
> {
> @@ -662,7 +677,7 @@ static void epf_ntb_mw_bar_clear(struct epf_ntb *ntb, int num_mws)
>
> /**
> * epf_ntb_epc_destroy() - Cleanup NTB EPC interface
> - * @ntb: NTB device that facilitates communication between HOST and vHOST
> + * @ntb: NTB device that facilitates communication between HOST and VHOST
> *
> * Wrapper for epf_ntb_epc_destroy_interface() to cleanup all the NTB interfaces
> */
> @@ -675,7 +690,9 @@ static void epf_ntb_epc_destroy(struct epf_ntb *ntb)
> /**
> * epf_ntb_init_epc_bar() - Identify BARs to be used for each of the NTB
> * constructs (scratchpad region, doorbell, memorywindow)
> - * @ntb: NTB device that facilitates communication between HOST and vHOST
> + * @ntb: NTB device that facilitates communication between HOST and VHOST
> + *
> + * Returns: Zero for success, or an error code in case of failure
> */
> static int epf_ntb_init_epc_bar(struct epf_ntb *ntb)
> {
> @@ -716,11 +733,13 @@ static int epf_ntb_init_epc_bar(struct epf_ntb *ntb)
>
> /**
> * epf_ntb_epc_init() - Initialize NTB interface
> - * @ntb: NTB device that facilitates communication between HOST and vHOST2
> + * @ntb: NTB device that facilitates communication between HOST and VHOST
> *
> * Wrapper to initialize a particular EPC interface and start the workqueue
> - * to check for commands from host. This function will write to the
> + * to check for commands from HOST. This function will write to the
> * EP controller HW for configuring it.
> + *
> + * Returns: Zero for success, or an error code in case of failure
> */
> static int epf_ntb_epc_init(struct epf_ntb *ntb)
> {
> @@ -787,7 +806,7 @@ static int epf_ntb_epc_init(struct epf_ntb *ntb)
>
> /**
> * epf_ntb_epc_cleanup() - Cleanup all NTB interfaces
> - * @ntb: NTB device that facilitates communication between HOST1 and HOST2
> + * @ntb: NTB device that facilitates communication between HOST and VHOST
> *
> * Wrapper to cleanup all NTB interfaces.
> */
> @@ -951,6 +970,8 @@ static const struct config_item_type ntb_group_type = {
> *
> * Add configfs directory specific to NTB. This directory will hold
> * NTB specific properties like db_count, spad_count, num_mws etc.,
> + *
> + * Returns: Pointer to config_group
> */
> static struct config_group *epf_ntb_add_cfs(struct pci_epf *epf,
> struct config_group *group)
> @@ -1292,6 +1313,8 @@ static struct pci_driver vntb_pci_driver = {
> * Invoked when a primary interface or secondary interface is bound to EPC
> * device. This function will succeed only when EPC is bound to both the
> * interfaces.
> + *
> + * Returns: Zero for success, or an error code in case of failure
> */
> static int epf_ntb_bind(struct pci_epf *epf)
> {
> @@ -1377,6 +1400,8 @@ static struct pci_epf_ops epf_ntb_ops = {
> *
> * Probe NTB function driver when endpoint function bus detects a NTB
> * endpoint function.
> + *
> + * Returns: Zero for success, or an error code in case of failure
> */
> static int epf_ntb_probe(struct pci_epf *epf)
> {
> --
> 2.34.1
>

--
மணிவண்ணன் சதாசிவம்