public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Lu Baolu <baolu.lu@linux.intel.com>
To: iommu@lists.linux.dev
Cc: Joerg Roedel <joro@8bytes.org>, Kevin Tian <kevin.tian@intel.com>,
	Will Deacon <will@kernel.org>,
	Robin Murphy <robin.murphy@arm.com>,
	Liu Yi L <yi.l.liu@intel.com>,
	Jacob jun Pan <jacob.jun.pan@intel.com>,
	linux-kernel@vger.kernel.org, Lu Baolu <baolu.lu@linux.intel.com>
Subject: [PATCH 2/7] iommu/vt-d: Add blocking domain support
Date: Thu,  3 Nov 2022 13:53:24 +0800	[thread overview]
Message-ID: <20221103055329.633052-3-baolu.lu@linux.intel.com> (raw)
In-Reply-To: <20221103055329.633052-1-baolu.lu@linux.intel.com>

The Intel IOMMU hardwares support blocking DMA transactions by clearing
the translation table entries. This implements a real blocking domain to
avoid using an empty UNMANAGED domain. The detach_dev callback of the
domain ops is not used in any path. Remove it to avoid dead code as well.

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
---
 drivers/iommu/intel/iommu.c | 56 +++++++++++++++++++++++++++++++------
 1 file changed, 48 insertions(+), 8 deletions(-)

diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
index e28faba1095f..7374a03cbe27 100644
--- a/drivers/iommu/intel/iommu.c
+++ b/drivers/iommu/intel/iommu.c
@@ -278,6 +278,7 @@ static LIST_HEAD(dmar_satc_units);
 	list_for_each_entry(rmrr, &dmar_rmrr_units, list)
 
 static void dmar_remove_one_dev_info(struct device *dev);
+static void intel_iommu_domain_free(struct iommu_domain *domain);
 
 int dmar_disabled = !IS_ENABLED(CONFIG_INTEL_IOMMU_DEFAULT_ON);
 int intel_iommu_sm = IS_ENABLED(CONFIG_INTEL_IOMMU_SCALABLE_MODE_DEFAULT_ON);
@@ -4132,12 +4133,58 @@ static int md_domain_init(struct dmar_domain *domain, int guest_width)
 	return 0;
 }
 
+/*
+ * Clear the page table pointer in context or pasid table entries so that
+ * all DMA requests without PASID from the device are blocked. If the page
+ * table has been set, clean up the data structures.
+ */
+static void device_block_translation(struct device *dev)
+{
+	struct device_domain_info *info = dev_iommu_priv_get(dev);
+	struct intel_iommu *iommu = info->iommu;
+	unsigned long flags;
+
+	if (!dev_is_real_dma_subdevice(dev)) {
+		if (sm_supported(iommu))
+			intel_pasid_tear_down_entry(iommu, dev,
+						    PASID_RID2PASID, false);
+		else
+			domain_context_clear(info);
+	}
+
+	if (!info->domain)
+		return;
+
+	spin_lock_irqsave(&info->domain->lock, flags);
+	list_del(&info->link);
+	spin_unlock_irqrestore(&info->domain->lock, flags);
+
+	domain_detach_iommu(info->domain, iommu);
+	info->domain = NULL;
+}
+
+static int blocking_domain_attach_dev(struct iommu_domain *domain,
+				      struct device *dev)
+{
+	device_block_translation(dev);
+	return 0;
+}
+
+static struct iommu_domain blocking_domain = {
+	.ops = &(const struct iommu_domain_ops) {
+		.attach_dev	= blocking_domain_attach_dev,
+		.free		= intel_iommu_domain_free
+	}
+};
+
 static struct iommu_domain *intel_iommu_domain_alloc(unsigned type)
 {
 	struct dmar_domain *dmar_domain;
 	struct iommu_domain *domain;
 
 	switch (type) {
+	case IOMMU_DOMAIN_BLOCKED:
+		return &blocking_domain;
 	case IOMMU_DOMAIN_DMA:
 	case IOMMU_DOMAIN_DMA_FQ:
 	case IOMMU_DOMAIN_UNMANAGED:
@@ -4172,7 +4219,7 @@ static struct iommu_domain *intel_iommu_domain_alloc(unsigned type)
 
 static void intel_iommu_domain_free(struct iommu_domain *domain)
 {
-	if (domain != &si_domain->domain)
+	if (domain != &si_domain->domain && domain != &blocking_domain)
 		domain_exit(to_dmar_domain(domain));
 }
 
@@ -4246,12 +4293,6 @@ static int intel_iommu_attach_device(struct iommu_domain *domain,
 	return domain_add_dev_info(to_dmar_domain(domain), dev);
 }
 
-static void intel_iommu_detach_device(struct iommu_domain *domain,
-				      struct device *dev)
-{
-	dmar_remove_one_dev_info(dev);
-}
-
 static int intel_iommu_map(struct iommu_domain *domain,
 			   unsigned long iova, phys_addr_t hpa,
 			   size_t size, int iommu_prot, gfp_t gfp)
@@ -4759,7 +4800,6 @@ const struct iommu_ops intel_iommu_ops = {
 #endif
 	.default_domain_ops = &(const struct iommu_domain_ops) {
 		.attach_dev		= intel_iommu_attach_device,
-		.detach_dev		= intel_iommu_detach_device,
 		.map_pages		= intel_iommu_map_pages,
 		.unmap_pages		= intel_iommu_unmap_pages,
 		.iotlb_sync_map		= intel_iommu_iotlb_sync_map,
-- 
2.34.1


  parent reply	other threads:[~2022-11-03  6:00 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-11-03  5:53 [PATCH 0/7] iommu/vt-d: Some cleanups Lu Baolu
2022-11-03  5:53 ` [PATCH 1/7] iommu/vt-d: Allocate pasid table in device probe path Lu Baolu
2022-11-04  2:06   ` Tian, Kevin
2022-11-05  1:09     ` Baolu Lu
2022-11-05  1:33       ` Tian, Kevin
2022-11-03  5:53 ` Lu Baolu [this message]
2022-11-04  2:11   ` [PATCH 2/7] iommu/vt-d: Add blocking domain support Tian, Kevin
2022-11-05  1:54     ` Baolu Lu
2022-11-03  5:53 ` [PATCH 3/7] iommu/vt-d: Use device_block_translation() in dev_attach error path Lu Baolu
2022-11-04  2:18   ` Tian, Kevin
2022-11-05  2:09     ` Baolu Lu
2022-11-05  2:59       ` Baolu Lu
2022-11-03  5:53 ` [PATCH 4/7] iommu/vt-d: Fold dmar_remove_one_dev_info() into its caller Lu Baolu
2022-11-03  5:53 ` [PATCH 5/7] iommu/vt-d: Rename domain_add_dev_info() Lu Baolu
2022-11-03  5:53 ` [PATCH 6/7] iommu/vt-d: Remove unnecessary domain_context_mapped() Lu Baolu
2022-11-04  2:19   ` Tian, Kevin
2022-11-03  5:53 ` [PATCH 7/7] iommu/vt-d: Use real field for indication of first level Lu Baolu
2022-11-04  2:20   ` Tian, Kevin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221103055329.633052-3-baolu.lu@linux.intel.com \
    --to=baolu.lu@linux.intel.com \
    --cc=iommu@lists.linux.dev \
    --cc=jacob.jun.pan@intel.com \
    --cc=joro@8bytes.org \
    --cc=kevin.tian@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robin.murphy@arm.com \
    --cc=will@kernel.org \
    --cc=yi.l.liu@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox