[PATCH RESEND] riscv: asid: Fixup stale TLB entry cause application crash

public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed

* [PATCH RESEND] riscv: asid: Fixup stale TLB entry cause application crash
@ 2022-11-08 10:20 guoren
  2022-11-08 10:27 ` Conor Dooley
                   ` (2 more replies)
  0 siblings, 3 replies; 7+ messages in thread
From: guoren @ 2022-11-08 10:20 UTC (permalink / raw)
  To: anup, paul.walmsley, palmer, conor.dooley, heiko, philipp.tomsich
  Cc: linux-riscv, linux-kernel, Guo Ren, Guo Ren, Anup Patel,
	Palmer Dabbelt

From: Guo Ren <guoren@linux.alibaba.com>

After use_asid_allocator enabled, the userspace application will
crash for stale tlb entry. Because only using cpumask_clear_cpu without
local_flush_tlb_all couldn't guarantee CPU's tlb entries fresh. Then
set_mm_asid would cause user space application get a stale value by
the stale tlb entry, but set_mm_noasid is okay.

Here is the symptom of the bug:
unhandled signal 11 code 0x1 (coredump)
   0x0000003fd6d22524 <+4>:     auipc   s0,0x70
   0x0000003fd6d22528 <+8>:     ld      s0,-148(s0) # 0x3fd6d92490
=> 0x0000003fd6d2252c <+12>:    ld      a5,0(s0)
(gdb) i r s0
s0          0x8082ed1cc3198b21       0x8082ed1cc3198b21
(gdb) x/16 0x3fd6d92490
0x3fd6d92490:   0xd80ac8a8      0x0000003f
The core dump file shows that the value of register s0 is wrong, but the
value in memory is right. This is because 'ld s0, -148(s0)' use a stale
mapping entry in TLB and got a wrong value from a stale physical
address.

When task run on CPU0, the task loaded/speculative-loaded the value of
address(0x3fd6d92490), and the first version of tlb mapping entry was
PTWed into CPU0's tlb.
When the task switched from CPU0 to CPU1 without local_tlb_flush_all
(because of asid), the task happened to write a value on address
(0x3fd6d92490). It caused do_page_fault -> wp_page_copy ->
ptep_clear_flush -> ptep_get_and_clear & flush_tlb_page.
The flush_tlb_page used mm_cpumask(mm) to determine which CPUs need
tlb flush, but CPU0 had cleared the CPU0's mm_cpumask in previous switch_mm.
So we only flushed the CPU1 tlb, and setted second version mapping
of the pte. When the task switch from CPU1 to CPU0 again, CPU0 still used a
stale tlb mapping entry which contained a wrong target physical address.
When the task happened to read that value, the bug would be raised.

Fixes: 65d4b9c53017 ("RISC-V: Implement ASID allocator")
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Cc: Anup Patel <apatel@ventanamicro.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
---
 arch/riscv/mm/context.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/riscv/mm/context.c b/arch/riscv/mm/context.c
index 7acbfbd14557..8ad6c2493e93 100644
--- a/arch/riscv/mm/context.c
+++ b/arch/riscv/mm/context.c
@@ -317,7 +317,9 @@ void switch_mm(struct mm_struct *prev, struct mm_struct *next,
 	 */
 	cpu = smp_processor_id();

-	cpumask_clear_cpu(cpu, mm_cpumask(prev));
+	if (!static_branch_unlikely(&use_asid_allocator))
+		cpumask_clear_cpu(cpu, mm_cpumask(prev));
+
 	cpumask_set_cpu(cpu, mm_cpumask(next));

 	set_mm(next, cpu);
-- 
2.36.1

^ permalink raw reply related	[flat|nested] 7+ messages in thread

* Re: [PATCH RESEND] riscv: asid: Fixup stale TLB entry cause application crash
  2022-11-08 10:20 [PATCH RESEND] riscv: asid: Fixup stale TLB entry cause application crash guoren
@ 2022-11-08 10:27 ` Conor Dooley
  2022-11-08 14:22   ` Conor Dooley
  2022-11-09  0:30   ` Guo Ren
  2022-11-09  1:42 ` kernel test robot
  2022-11-09  2:33 ` kernel test robot
  2 siblings, 2 replies; 7+ messages in thread
From: Conor Dooley @ 2022-11-08 10:27 UTC (permalink / raw)
  To: linux-riscv, guoren, anup, paul.walmsley, palmer, conor.dooley,
	heiko, philipp.tomsich
  Cc: linux-kernel, Guo Ren, Guo Ren, Anup Patel, Palmer Dabbelt



On 8 November 2022 10:20:44 GMT, guoren@kernel.org wrote:
>From: Guo Ren <guoren@linux.alibaba.com>
>
>After use_asid_allocator enabled, the userspace application will
>crash for stale tlb entry. Because only using cpumask_clear_cpu without
>local_flush_tlb_all couldn't guarantee CPU's tlb entries fresh. Then
>set_mm_asid would cause user space application get a stale value by
>the stale tlb entry, but set_mm_noasid is okay.
>
>Here is the symptom of the bug:
>unhandled signal 11 code 0x1 (coredump)
>   0x0000003fd6d22524 <+4>:     auipc   s0,0x70
>   0x0000003fd6d22528 <+8>:     ld      s0,-148(s0) # 0x3fd6d92490
>=> 0x0000003fd6d2252c <+12>:    ld      a5,0(s0)
>(gdb) i r s0
>s0          0x8082ed1cc3198b21       0x8082ed1cc3198b21
>(gdb) x/16 0x3fd6d92490
>0x3fd6d92490:   0xd80ac8a8      0x0000003f
>The core dump file shows that the value of register s0 is wrong, but the
>value in memory is right. This is because 'ld s0, -148(s0)' use a stale
>mapping entry in TLB and got a wrong value from a stale physical
>address.
>
>When task run on CPU0, the task loaded/speculative-loaded the value of
>address(0x3fd6d92490), and the first version of tlb mapping entry was
>PTWed into CPU0's tlb.
>When the task switched from CPU0 to CPU1 without local_tlb_flush_all
>(because of asid), the task happened to write a value on address
>(0x3fd6d92490). It caused do_page_fault -> wp_page_copy ->
>ptep_clear_flush -> ptep_get_and_clear & flush_tlb_page.
>The flush_tlb_page used mm_cpumask(mm) to determine which CPUs need
>tlb flush, but CPU0 had cleared the CPU0's mm_cpumask in previous switch_mm.
>So we only flushed the CPU1 tlb, and setted second version mapping
>of the pte. When the task switch from CPU1 to CPU0 again, CPU0 still used a
>stale tlb mapping entry which contained a wrong target physical address.
>When the task happened to read that value, the bug would be raised.
>
>Fixes: 65d4b9c53017 ("RISC-V: Implement ASID allocator")
>Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
>Signed-off-by: Guo Ren <guoren@kernel.org>
>Cc: Anup Patel <apatel@ventanamicro.com>
>Cc: Palmer Dabbelt <palmer@rivosinc.com>
>---
> arch/riscv/mm/context.c | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
>diff --git a/arch/riscv/mm/context.c b/arch/riscv/mm/context.c
>index 7acbfbd14557..8ad6c2493e93 100644
>--- a/arch/riscv/mm/context.c
>+++ b/arch/riscv/mm/context.c
>@@ -317,7 +317,9 @@ void switch_mm(struct mm_struct *prev, struct mm_struct *next,
> 	 */
> 	cpu = smp_processor_id();
> 
>-	cpumask_clear_cpu(cpu, mm_cpumask(prev));
>+	if (!static_branch_unlikely(&use_asid_allocator))
>+		cpumask_clear_cpu(cpu, mm_cpumask(prev));
>+
> 	cpumask_set_cpu(cpu, mm_cpumask(next));
> 
> 	set_mm(next, cpu);

This is a completely different patch to what you already sent. Why have you marked it RESEND rather than v2?

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH RESEND] riscv: asid: Fixup stale TLB entry cause application crash
  2022-11-08 10:27 ` Conor Dooley
@ 2022-11-08 14:22   ` Conor Dooley
  2022-11-09  0:30     ` Guo Ren
  2022-11-09  0:30   ` Guo Ren
  1 sibling, 1 reply; 7+ messages in thread
From: Conor Dooley @ 2022-11-08 14:22 UTC (permalink / raw)
  To: guoren
  Cc: linux-riscv, guoren, anup, paul.walmsley, palmer, heiko,
	philipp.tomsich, linux-kernel, Guo Ren, Anup Patel,
	Palmer Dabbelt

On Tue, Nov 08, 2022 at 10:27:51AM +0000, Conor Dooley wrote:
> 
> 
> On 8 November 2022 10:20:44 GMT, guoren@kernel.org wrote:
> >From: Guo Ren <guoren@linux.alibaba.com>
> >
> >After use_asid_allocator enabled, the userspace application will
> >crash for stale tlb entry. Because only using cpumask_clear_cpu without
> >local_flush_tlb_all couldn't guarantee CPU's tlb entries fresh. Then
> >set_mm_asid would cause user space application get a stale value by
> >the stale tlb entry, but set_mm_noasid is okay.
> >
> >Here is the symptom of the bug:
> >unhandled signal 11 code 0x1 (coredump)
> >   0x0000003fd6d22524 <+4>:     auipc   s0,0x70
> >   0x0000003fd6d22528 <+8>:     ld      s0,-148(s0) # 0x3fd6d92490
> >=> 0x0000003fd6d2252c <+12>:    ld      a5,0(s0)
> >(gdb) i r s0
> >s0          0x8082ed1cc3198b21       0x8082ed1cc3198b21
> >(gdb) x/16 0x3fd6d92490
> >0x3fd6d92490:   0xd80ac8a8      0x0000003f
> >The core dump file shows that the value of register s0 is wrong, but the
> >value in memory is right. This is because 'ld s0, -148(s0)' use a stale
> >mapping entry in TLB and got a wrong value from a stale physical
> >address.
> >
> >When task run on CPU0, the task loaded/speculative-loaded the value of
> >address(0x3fd6d92490), and the first version of tlb mapping entry was
> >PTWed into CPU0's tlb.
> >When the task switched from CPU0 to CPU1 without local_tlb_flush_all
> >(because of asid), the task happened to write a value on address
> >(0x3fd6d92490). It caused do_page_fault -> wp_page_copy ->
> >ptep_clear_flush -> ptep_get_and_clear & flush_tlb_page.
> >The flush_tlb_page used mm_cpumask(mm) to determine which CPUs need
> >tlb flush, but CPU0 had cleared the CPU0's mm_cpumask in previous switch_mm.
> >So we only flushed the CPU1 tlb, and setted second version mapping
> >of the pte. When the task switch from CPU1 to CPU0 again, CPU0 still used a
> >stale tlb mapping entry which contained a wrong target physical address.
> >When the task happened to read that value, the bug would be raised.
> >
> >Fixes: 65d4b9c53017 ("RISC-V: Implement ASID allocator")
> >Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
> >Signed-off-by: Guo Ren <guoren@kernel.org>
> >Cc: Anup Patel <apatel@ventanamicro.com>
> >Cc: Palmer Dabbelt <palmer@rivosinc.com>
> >---
> > arch/riscv/mm/context.c | 4 +++-
> > 1 file changed, 3 insertions(+), 1 deletion(-)
> >
> >diff --git a/arch/riscv/mm/context.c b/arch/riscv/mm/context.c
> >index 7acbfbd14557..8ad6c2493e93 100644
> >--- a/arch/riscv/mm/context.c
> >+++ b/arch/riscv/mm/context.c
> >@@ -317,7 +317,9 @@ void switch_mm(struct mm_struct *prev, struct mm_struct *next,
> > 	 */
> > 	cpu = smp_processor_id();
> > 
> >-	cpumask_clear_cpu(cpu, mm_cpumask(prev));
> >+	if (!static_branch_unlikely(&use_asid_allocator))
> >+		cpumask_clear_cpu(cpu, mm_cpumask(prev));
> >+
> > 	cpumask_set_cpu(cpu, mm_cpumask(next));
> > 
> > 	set_mm(next, cpu);
> 
> This is a completely different patch to what you already sent.
> Why have you marked it RESEND rather than v2?

In addition, it seems to break the build for the nommu defconfigs.

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH RESEND] riscv: asid: Fixup stale TLB entry cause application crash
  2022-11-08 10:27 ` Conor Dooley
  2022-11-08 14:22   ` Conor Dooley
@ 2022-11-09  0:30   ` Guo Ren
  1 sibling, 0 replies; 7+ messages in thread
From: Guo Ren @ 2022-11-09  0:30 UTC (permalink / raw)
  To: Conor Dooley
  Cc: linux-riscv, anup, paul.walmsley, palmer, conor.dooley, heiko,
	philipp.tomsich, linux-kernel, Guo Ren, Anup Patel,
	Palmer Dabbelt

On Tue, Nov 8, 2022 at 6:27 PM Conor Dooley <conor@kernel.org> wrote:
>
>
>
> On 8 November 2022 10:20:44 GMT, guoren@kernel.org wrote:
> >From: Guo Ren <guoren@linux.alibaba.com>
> >
> >After use_asid_allocator enabled, the userspace application will
> >crash for stale tlb entry. Because only using cpumask_clear_cpu without
> >local_flush_tlb_all couldn't guarantee CPU's tlb entries fresh. Then
> >set_mm_asid would cause user space application get a stale value by
> >the stale tlb entry, but set_mm_noasid is okay.
> >
> >Here is the symptom of the bug:
> >unhandled signal 11 code 0x1 (coredump)
> >   0x0000003fd6d22524 <+4>:     auipc   s0,0x70
> >   0x0000003fd6d22528 <+8>:     ld      s0,-148(s0) # 0x3fd6d92490
> >=> 0x0000003fd6d2252c <+12>:    ld      a5,0(s0)
> >(gdb) i r s0
> >s0          0x8082ed1cc3198b21       0x8082ed1cc3198b21
> >(gdb) x/16 0x3fd6d92490
> >0x3fd6d92490:   0xd80ac8a8      0x0000003f
> >The core dump file shows that the value of register s0 is wrong, but the
> >value in memory is right. This is because 'ld s0, -148(s0)' use a stale
> >mapping entry in TLB and got a wrong value from a stale physical
> >address.
> >
> >When task run on CPU0, the task loaded/speculative-loaded the value of
> >address(0x3fd6d92490), and the first version of tlb mapping entry was
> >PTWed into CPU0's tlb.
> >When the task switched from CPU0 to CPU1 without local_tlb_flush_all
> >(because of asid), the task happened to write a value on address
> >(0x3fd6d92490). It caused do_page_fault -> wp_page_copy ->
> >ptep_clear_flush -> ptep_get_and_clear & flush_tlb_page.
> >The flush_tlb_page used mm_cpumask(mm) to determine which CPUs need
> >tlb flush, but CPU0 had cleared the CPU0's mm_cpumask in previous switch_mm.
> >So we only flushed the CPU1 tlb, and setted second version mapping
> >of the pte. When the task switch from CPU1 to CPU0 again, CPU0 still used a
> >stale tlb mapping entry which contained a wrong target physical address.
> >When the task happened to read that value, the bug would be raised.
> >
> >Fixes: 65d4b9c53017 ("RISC-V: Implement ASID allocator")
> >Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
> >Signed-off-by: Guo Ren <guoren@kernel.org>
> >Cc: Anup Patel <apatel@ventanamicro.com>
> >Cc: Palmer Dabbelt <palmer@rivosinc.com>
> >---
> > arch/riscv/mm/context.c | 4 +++-
> > 1 file changed, 3 insertions(+), 1 deletion(-)
> >
> >diff --git a/arch/riscv/mm/context.c b/arch/riscv/mm/context.c
> >index 7acbfbd14557..8ad6c2493e93 100644
> >--- a/arch/riscv/mm/context.c
> >+++ b/arch/riscv/mm/context.c
> >@@ -317,7 +317,9 @@ void switch_mm(struct mm_struct *prev, struct mm_struct *next,
> >        */
> >       cpu = smp_processor_id();
> >
> >-      cpumask_clear_cpu(cpu, mm_cpumask(prev));
> >+      if (!static_branch_unlikely(&use_asid_allocator))
> >+              cpumask_clear_cpu(cpu, mm_cpumask(prev));
> >+
> >       cpumask_set_cpu(cpu, mm_cpumask(next));
> >
> >       set_mm(next, cpu);
>
> This is a completely different patch to what you already sent. Why have you marked it RESEND rather than v2?
Okay, I should send v2.



-- 
Best Regards
 Guo Ren

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH RESEND] riscv: asid: Fixup stale TLB entry cause application crash
  2022-11-08 14:22   ` Conor Dooley
@ 2022-11-09  0:30     ` Guo Ren
  0 siblings, 0 replies; 7+ messages in thread
From: Guo Ren @ 2022-11-09  0:30 UTC (permalink / raw)
  To: Conor Dooley
  Cc: linux-riscv, anup, paul.walmsley, palmer, heiko, philipp.tomsich,
	linux-kernel, Guo Ren, Anup Patel, Palmer Dabbelt

Yes, thx for pointing that out.

On Tue, Nov 8, 2022 at 10:23 PM Conor Dooley <conor.dooley@microchip.com> wrote:
>
> On Tue, Nov 08, 2022 at 10:27:51AM +0000, Conor Dooley wrote:
> >
> >
> > On 8 November 2022 10:20:44 GMT, guoren@kernel.org wrote:
> > >From: Guo Ren <guoren@linux.alibaba.com>
> > >
> > >After use_asid_allocator enabled, the userspace application will
> > >crash for stale tlb entry. Because only using cpumask_clear_cpu without
> > >local_flush_tlb_all couldn't guarantee CPU's tlb entries fresh. Then
> > >set_mm_asid would cause user space application get a stale value by
> > >the stale tlb entry, but set_mm_noasid is okay.
> > >
> > >Here is the symptom of the bug:
> > >unhandled signal 11 code 0x1 (coredump)
> > >   0x0000003fd6d22524 <+4>:     auipc   s0,0x70
> > >   0x0000003fd6d22528 <+8>:     ld      s0,-148(s0) # 0x3fd6d92490
> > >=> 0x0000003fd6d2252c <+12>:    ld      a5,0(s0)
> > >(gdb) i r s0
> > >s0          0x8082ed1cc3198b21       0x8082ed1cc3198b21
> > >(gdb) x/16 0x3fd6d92490
> > >0x3fd6d92490:   0xd80ac8a8      0x0000003f
> > >The core dump file shows that the value of register s0 is wrong, but the
> > >value in memory is right. This is because 'ld s0, -148(s0)' use a stale
> > >mapping entry in TLB and got a wrong value from a stale physical
> > >address.
> > >
> > >When task run on CPU0, the task loaded/speculative-loaded the value of
> > >address(0x3fd6d92490), and the first version of tlb mapping entry was
> > >PTWed into CPU0's tlb.
> > >When the task switched from CPU0 to CPU1 without local_tlb_flush_all
> > >(because of asid), the task happened to write a value on address
> > >(0x3fd6d92490). It caused do_page_fault -> wp_page_copy ->
> > >ptep_clear_flush -> ptep_get_and_clear & flush_tlb_page.
> > >The flush_tlb_page used mm_cpumask(mm) to determine which CPUs need
> > >tlb flush, but CPU0 had cleared the CPU0's mm_cpumask in previous switch_mm.
> > >So we only flushed the CPU1 tlb, and setted second version mapping
> > >of the pte. When the task switch from CPU1 to CPU0 again, CPU0 still used a
> > >stale tlb mapping entry which contained a wrong target physical address.
> > >When the task happened to read that value, the bug would be raised.
> > >
> > >Fixes: 65d4b9c53017 ("RISC-V: Implement ASID allocator")
> > >Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
> > >Signed-off-by: Guo Ren <guoren@kernel.org>
> > >Cc: Anup Patel <apatel@ventanamicro.com>
> > >Cc: Palmer Dabbelt <palmer@rivosinc.com>
> > >---
> > > arch/riscv/mm/context.c | 4 +++-
> > > 1 file changed, 3 insertions(+), 1 deletion(-)
> > >
> > >diff --git a/arch/riscv/mm/context.c b/arch/riscv/mm/context.c
> > >index 7acbfbd14557..8ad6c2493e93 100644
> > >--- a/arch/riscv/mm/context.c
> > >+++ b/arch/riscv/mm/context.c
> > >@@ -317,7 +317,9 @@ void switch_mm(struct mm_struct *prev, struct mm_struct *next,
> > >      */
> > >     cpu = smp_processor_id();
> > >
> > >-    cpumask_clear_cpu(cpu, mm_cpumask(prev));
> > >+    if (!static_branch_unlikely(&use_asid_allocator))
> > >+            cpumask_clear_cpu(cpu, mm_cpumask(prev));
> > >+
> > >     cpumask_set_cpu(cpu, mm_cpumask(next));
> > >
> > >     set_mm(next, cpu);
> >
> > This is a completely different patch to what you already sent.
> > Why have you marked it RESEND rather than v2?
>
> In addition, it seems to break the build for the nommu defconfigs.



-- 
Best Regards
 Guo Ren

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH RESEND] riscv: asid: Fixup stale TLB entry cause application crash
  2022-11-08 10:20 [PATCH RESEND] riscv: asid: Fixup stale TLB entry cause application crash guoren
  2022-11-08 10:27 ` Conor Dooley
@ 2022-11-09  1:42 ` kernel test robot
  2022-11-09  2:33 ` kernel test robot
  2 siblings, 0 replies; 7+ messages in thread
From: kernel test robot @ 2022-11-09  1:42 UTC (permalink / raw)
  To: guoren, anup, paul.walmsley, palmer, conor.dooley, heiko,
	philipp.tomsich
  Cc: oe-kbuild-all, linux-riscv, linux-kernel, Guo Ren, Anup Patel,
	Palmer Dabbelt

[-- Attachment #1: Type: text/plain, Size: 1838 bytes --]

Hi,

I love your patch! Yet something to improve:

[auto build test ERROR on linus/master]
[also build test ERROR on v6.1-rc4 next-20221108]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/guoren-kernel-org/riscv-asid-Fixup-stale-TLB-entry-cause-application-crash/20221108-182151
patch link:    https://lore.kernel.org/r/20221108102044.3317793-1-guoren%40kernel.org
patch subject: [PATCH RESEND] riscv: asid: Fixup stale TLB entry cause application crash
config: riscv-nommu_virt_defconfig
compiler: riscv64-linux-gcc (GCC) 12.1.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/intel-lab-lkp/linux/commit/025af39c1eb149e584705dfc72ac117812c82f3e
        git remote add linux-review https://github.com/intel-lab-lkp/linux
        git fetch --no-tags linux-review guoren-kernel-org/riscv-asid-Fixup-stale-TLB-entry-cause-application-crash/20221108-182151
        git checkout 025af39c1eb149e584705dfc72ac117812c82f3e
        # save the config file
        mkdir build_dir && cp config build_dir/.config
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=riscv SHELL=/bin/bash

If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

   riscv64-linux-ld: arch/riscv/mm/context.o: in function `.L0 ':
>> context.c:(__jump_table+0x8): undefined reference to `use_asid_allocator'

-- 
0-DAY CI Kernel Test Service
https://01.org/lkp

[-- Attachment #2: config --]
[-- Type: text/plain, Size: 29763 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/riscv 6.1.0-rc4 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="riscv64-linux-gcc (GCC) 12.1.0"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=120100
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=23800
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=23800
CONFIG_LLD_VERSION=0
CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=123
CONFIG_IRQ_WORK=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_BUILD_SALT=""
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SYSVIPC is not set
# CONFIG_WATCH_QUEUE is not set
# CONFIG_USELIB is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# end of IRQ subsystem

CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
CONFIG_ARCH_CLOCKSOURCE_INIT=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_HAS_TICK_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK=y
CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y
CONFIG_CONTEXT_TRACKING=y
CONFIG_CONTEXT_TRACKING_IDLE=y

#
# Timers subsystem
#
CONFIG_HZ_PERIODIC=y
# CONFIG_NO_HZ_IDLE is not set
# CONFIG_NO_HZ_FULL is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
# end of Timers subsystem

#
# BPF subsystem
#
# CONFIG_BPF_SYSCALL is not set
# end of BPF subsystem

CONFIG_PREEMPT_NONE_BUILD=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting

# CONFIG_CPU_ISOLATION is not set

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
# end of RCU Subsystem

# CONFIG_IKCONFIG is not set
# CONFIG_IKHEADERS is not set
CONFIG_LOG_BUF_SHIFT=16
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=12
CONFIG_GENERIC_SCHED_CLOCK=y

#
# Scheduler features
#
# end of Scheduler features

CONFIG_CC_HAS_INT128=y
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
CONFIG_GCC12_NO_ARRAY_BOUNDS=y
CONFIG_CC_NO_ARRAY_BOUNDS=y
CONFIG_ARCH_SUPPORTS_INT128=y
# CONFIG_CGROUPS is not set
# CONFIG_NAMESPACES is not set
# CONFIG_CHECKPOINT_RESTORE is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_INITRAMFS_FORCE is not set
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not set
# CONFIG_RD_LZ4 is not set
CONFIG_RD_ZSTD=y
# CONFIG_BOOT_CONFIG is not set
CONFIG_INITRAMFS_PRESERVE_MTIME=y
# CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_EXPERT=y
CONFIG_MULTIUSER=y
# CONFIG_SGETMASK_SYSCALL is not set
# CONFIG_SYSFS_SYSCALL is not set
# CONFIG_FHANDLE is not set
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_BASE_FULL is not set
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
# CONFIG_AIO is not set
# CONFIG_IO_URING is not set
# CONFIG_ADVISE_SYSCALLS is not set
CONFIG_MEMBARRIER=y
# CONFIG_KALLSYMS is not set
# CONFIG_KCMP is not set
CONFIG_RSEQ=y
# CONFIG_DEBUG_RSEQ is not set
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
# CONFIG_PC104 is not set

#
# Kernel Performance Events And Counters
#
# CONFIG_PERF_EVENTS is not set
# end of Kernel Performance Events And Counters

# CONFIG_PROFILING is not set
# end of General setup

CONFIG_64BIT=y
CONFIG_RISCV=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=18
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_BITS_MAX=24
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=17
CONFIG_RISCV_M_MODE=y
# CONFIG_MMU is not set
CONFIG_PAGE_OFFSET=0x80000000
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_CSUM=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_PGTABLE_LEVELS=5
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_AS_HAS_INSN=y

#
# SoC selection
#
# CONFIG_SOC_MICROCHIP_POLARFIRE is not set
# CONFIG_SOC_SIFIVE is not set
# CONFIG_SOC_STARFIVE is not set
CONFIG_SOC_VIRT=y
# CONFIG_SOC_CANAAN is not set
# end of SoC selection

#
# CPU errata selection
#
# CONFIG_ERRATA_SIFIVE is not set
# CONFIG_ERRATA_THEAD is not set
# end of CPU errata selection

#
# Platform type
#
CONFIG_NONPORTABLE=y
# CONFIG_ARCH_RV32I is not set
CONFIG_ARCH_RV64I=y
# CONFIG_CMODEL_MEDLOW is not set
CONFIG_CMODEL_MEDANY=y
CONFIG_SMP=y
CONFIG_NR_CPUS=64
# CONFIG_HOTPLUG_CPU is not set
CONFIG_TUNE_GENERIC=y
CONFIG_RISCV_ISA_C=y
CONFIG_TOOLCHAIN_HAS_ZIHINTPAUSE=y
CONFIG_FPU=y
# end of Platform type

#
# Kernel features
#
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_RISCV_BOOT_SPINWAIT=y
# CONFIG_KEXEC_FILE is not set
# CONFIG_CRASH_DUMP is not set
# end of Kernel features

#
# Boot options
#
CONFIG_CMDLINE="root=/dev/vda rw earlycon=uart8250,mmio,0x10000000,115200n8 console=ttyS0"
# CONFIG_CMDLINE_FALLBACK is not set
# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE_FORCE=y
CONFIG_CC_HAVE_STACKPROTECTOR_TLS=y
CONFIG_STACKPROTECTOR_PER_TASK=y
# CONFIG_PHYS_RAM_BASE_FIXED is not set
# end of Boot options

#
# Power management options
#
# CONFIG_PM is not set
# end of Power management options

#
# CPU Power Management
#

#
# CPU Idle
#
# CONFIG_CPU_IDLE is not set
# end of CPU Idle
# end of CPU Power Management

# CONFIG_VIRTUALIZATION is not set

#
# General architecture-dependent options
#
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
CONFIG_HAVE_64BIT_ALIGNED_ACCESS=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP=y
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR_STRONG=y
CONFIG_LTO_NONE=y
CONFIG_HAVE_CONTEXT_TRACKING_USER=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PUD=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_CLONE_BACKWARDS=y
# CONFIG_COMPAT_32BIT_TIME is not set
CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y

#
# GCOV-based kernel profiling
#
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling

CONFIG_HAVE_GCC_PLUGINS=y
CONFIG_GCC_PLUGINS=y
# CONFIG_GCC_PLUGIN_LATENT_ENTROPY is not set
# end of General architecture-dependent options

CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
CONFIG_BLOCK_LEGACY_AUTOLOAD=y
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_DEV_ZONED is not set
# CONFIG_BLK_WBT is not set
# CONFIG_BLK_SED_OPAL is not set
# CONFIG_BLK_INLINE_ENCRYPTION is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
# CONFIG_MSDOS_PARTITION is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
# end of Partition Types

CONFIG_BLK_MQ_VIRTIO=y

#
# IO Schedulers
#
# CONFIG_MQ_IOSCHED_DEADLINE is not set
# CONFIG_MQ_IOSCHED_KYBER is not set
# CONFIG_IOSCHED_BFQ is not set
# end of IO Schedulers

CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_MMIOWB=y
CONFIG_MMIOWB=y

#
# Executable file formats
#
CONFIG_BINFMT_SCRIPT=y
CONFIG_ARCH_HAS_BINFMT_FLAT=y
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_FLAT_NO_DATA_START_OFFSET=y
# CONFIG_BINFMT_FLAT_OLD is not set
# CONFIG_BINFMT_ZFLAT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_COREDUMP is not set
# end of Executable file formats

#
# Memory Management options
#

#
# SLAB allocator options
#
# CONFIG_SLAB is not set
# CONFIG_SLUB is not set
CONFIG_SLOB=y
# end of SLAB allocator options

# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_MMAP_ALLOW_UNINITIALIZED is not set
CONFIG_FLATMEM=y
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
# CONFIG_PAGE_REPORTING is not set
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_NEED_PER_CPU_KM=y
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_ARCH_HAS_CURRENT_STACK_POINTER=y
CONFIG_ZONE_DMA32=y
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_PERCPU_STATS is not set

#
# GUP_TEST needs to have DEBUG_FS enabled
#
CONFIG_ARCH_HAS_PTE_SPECIAL=y

#
# Data Access Monitoring
#
# CONFIG_DAMON is not set
# end of Data Access Monitoring
# end of Memory Management options

# CONFIG_NET is not set

#
# Device Drivers
#
CONFIG_HAVE_PCI=y
# CONFIG_PCI is not set
# CONFIG_PCCARD is not set

#
# Generic Driver Options
#
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_DEVTMPFS_SAFE is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y

#
# Firmware loader
#
# CONFIG_FW_LOADER is not set
# end of Firmware loader

# CONFIG_ALLOW_DEV_COREDUMP is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
CONFIG_REGMAP=y
CONFIG_REGMAP_MMIO=y
CONFIG_GENERIC_ARCH_TOPOLOGY=y
# end of Generic Driver Options

#
# Bus devices
#
# CONFIG_MHI_BUS is not set
# CONFIG_MHI_BUS_EP is not set
# end of Bus devices

#
# Firmware Drivers
#

#
# ARM System Control and Management Interface Protocol
#
# end of ARM System Control and Management Interface Protocol

# CONFIG_FIRMWARE_MEMMAP is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers

# CONFIG_GNSS is not set
# CONFIG_MTD is not set
CONFIG_DTC=y
CONFIG_OF=y
# CONFIG_OF_UNITTEST is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_RESERVED_MEM=y
# CONFIG_OF_OVERLAY is not set
CONFIG_OF_DMA_DEFAULT_COHERENT=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
# CONFIG_BLK_DEV_LOOP is not set

#
# DRBD disabled because PROC_FS or INET not selected
#
# CONFIG_BLK_DEV_RAM is not set
CONFIG_VIRTIO_BLK=y
# CONFIG_BLK_DEV_UBLK is not set

#
# NVME Support
#
# CONFIG_NVME_FC is not set
# end of NVME Support

#
# Misc devices
#
# CONFIG_DUMMY_IRQ is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_SRAM is not set
# CONFIG_XILINX_SDFEC is not set
# CONFIG_OPEN_DICE is not set
# CONFIG_VCPU_STALL_DETECTOR is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_93CX6 is not set
# end of EEPROM support

#
# Texas Instruments shared transport line discipline
#
# end of Texas Instruments shared transport line discipline

#
# Altera FPGA firmware download module (requires I2C)
#
# CONFIG_ECHO is not set
# CONFIG_PVPANIC is not set
# end of Misc devices

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# end of SCSI device support

# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_TARGET_CORE is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set

#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
# CONFIG_RMI4_CORE is not set

#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
# end of Hardware I/O ports
# end of Input device support

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_LDISC_AUTOLOAD is not set

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_16550A_VARIANTS=y
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=1
CONFIG_SERIAL_8250_RUNTIME_UARTS=1
# CONFIG_SERIAL_8250_EXTENDED is not set
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_RT288X is not set
CONFIG_SERIAL_OF_PLATFORM=y

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_SIFIVE is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_FSL_LINFLEXUART is not set
# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
# CONFIG_SERIAL_SPRD is not set
# end of Serial drivers

# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_GOLDFISH_TTY is not set
# CONFIG_NULL_TTY is not set
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_TTY_PRINTK is not set
# CONFIG_VIRTIO_CONSOLE is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_DEVMEM is not set
# CONFIG_TCG_TPM is not set
# CONFIG_XILLYBUS is not set
CONFIG_RANDOM_TRUST_CPU=y
CONFIG_RANDOM_TRUST_BOOTLOADER=y
# end of Character devices

#
# I2C support
#
# CONFIG_I2C is not set
# end of I2C support

# CONFIG_I3C is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
# CONFIG_PPS is not set

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK_OPTIONAL=y

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# end of PTP clock support

# CONFIG_PINCTRL is not set
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_RESET=y
# CONFIG_POWER_RESET_RESTART is not set
CONFIG_POWER_RESET_SYSCON=y
CONFIG_POWER_RESET_SYSCON_POWEROFF=y
# CONFIG_SYSCON_REBOOT_MODE is not set
# CONFIG_NVMEM_REBOOT_MODE is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_ATMEL_FLEXCOM is not set
# CONFIG_MFD_ATMEL_HLCDC is not set
# CONFIG_MFD_MADERA is not set
# CONFIG_MFD_HI6421_PMIC is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_SM501 is not set
CONFIG_MFD_SYSCON=y
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_TQMX86 is not set
# end of Multifunction device drivers

# CONFIG_REGULATOR is not set
# CONFIG_RC_CORE is not set

#
# CEC support
#
# CONFIG_MEDIA_CEC_SUPPORT is not set
# end of CEC support

# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
# CONFIG_DRM is not set
# CONFIG_DRM_DEBUG_MODESET_LOCK is not set

#
# ARM devices
#
# end of ARM devices

#
# Frame buffer Devices
#
# CONFIG_FB is not set
# end of Frame buffer Devices

#
# Backlight & LCD device support
#
# CONFIG_LCD_CLASS_DEVICE is not set
# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
# end of Backlight & LCD device support

#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
# end of Console display driver support
# end of Graphics support

# CONFIG_SOUND is not set

#
# HID support
#
# CONFIG_HID is not set
# end of HID support

CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_EDAC_SUPPORT=y
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set

#
# DMABUF options
#
# CONFIG_SYNC_FILE is not set
# CONFIG_DMABUF_HEAPS is not set
# end of DMABUF options

# CONFIG_AUXDISPLAY is not set
# CONFIG_VFIO is not set
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO_ANCHOR=y
CONFIG_VIRTIO=y
CONFIG_VIRTIO_MENU=y
# CONFIG_VIRTIO_BALLOON is not set
# CONFIG_VIRTIO_INPUT is not set
CONFIG_VIRTIO_MMIO=y
CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
CONFIG_VHOST_MENU=y
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set

#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support

# CONFIG_GREYBUS is not set
# CONFIG_COMEDI is not set
# CONFIG_STAGING is not set
CONFIG_GOLDFISH=y
# CONFIG_GOLDFISH_PIPE is not set
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
# CONFIG_COMMON_CLK_AXI_CLKGEN is not set
# CONFIG_COMMON_CLK_FIXED_MMIO is not set
# CONFIG_XILINX_VCU is not set
# CONFIG_COMMON_CLK_XLNX_CLKWZRD is not set
# CONFIG_HWSPINLOCK is not set

#
# Clock Source drivers
#
CONFIG_TIMER_OF=y
CONFIG_TIMER_PROBE=y
CONFIG_CLINT_TIMER=y
# CONFIG_MICROCHIP_PIT64B is not set
# end of Clock Source drivers

# CONFIG_MAILBOX is not set

#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers

#
# Rpmsg drivers
#
# CONFIG_RPMSG_VIRTIO is not set
# end of Rpmsg drivers

# CONFIG_SOUNDWIRE is not set

#
# SOC (System On Chip) specific Drivers
#

#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers

#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers

#
# NXP/Freescale QorIQ SoC drivers
#
# end of NXP/Freescale QorIQ SoC drivers

#
# fujitsu SoC drivers
#
# end of fujitsu SoC drivers

#
# i.MX SoC drivers
#
# end of i.MX SoC drivers

#
# Enable LiteX SoC Builder specific drivers
#
# CONFIG_LITEX_SOC_CONTROLLER is not set
# end of Enable LiteX SoC Builder specific drivers

#
# Qualcomm SoC drivers
#
# end of Qualcomm SoC drivers

# CONFIG_SOC_TI is not set

#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers

# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_PWM is not set

#
# IRQ chip support
#
CONFIG_IRQCHIP=y
# CONFIG_AL_FIC is not set
# CONFIG_XILINX_INTC is not set
CONFIG_RISCV_INTC=y
CONFIG_SIFIVE_PLIC=y
# end of IRQ chip support

# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set

#
# PHY Subsystem
#
# CONFIG_GENERIC_PHY is not set
# CONFIG_PHY_CAN_TRANSCEIVER is not set

#
# PHY drivers for Broadcom platforms
#
# CONFIG_BCM_KONA_USB2_PHY is not set
# end of PHY drivers for Broadcom platforms

# CONFIG_PHY_CADENCE_TORRENT is not set
# CONFIG_PHY_CADENCE_DPHY is not set
# CONFIG_PHY_CADENCE_DPHY_RX is not set
# CONFIG_PHY_CADENCE_SALVO is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_LAN966X_SERDES is not set
# CONFIG_PHY_OCELOT_SERDES is not set
# end of PHY Subsystem

# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set
# CONFIG_RAS is not set

#
# Android
#
# end of Android

# CONFIG_LIBNVDIMM is not set
# CONFIG_DAX is not set
# CONFIG_NVMEM is not set

#
# HW tracing support
#
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set
# end of HW tracing support

# CONFIG_FPGA is not set
# CONFIG_FSI is not set
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set
# CONFIG_INTERCONNECT is not set
# CONFIG_COUNTER is not set
# CONFIG_PECI is not set
# CONFIG_HTE is not set
# end of Device Drivers

#
# File systems
#
# CONFIG_VALIDATE_FS_PARSER is not set
CONFIG_FS_IOMAP=y
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_F2FS_FS is not set
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
# CONFIG_FS_ENCRYPTION is not set
# CONFIG_FS_VERITY is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY_USER is not set
# CONFIG_FANOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_OVERLAY_FS is not set

#
# Caches
#
# CONFIG_FSCACHE is not set
# end of Caches

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
# end of CD-ROM/DVD Filesystems

#
# DOS/FAT/EXFAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_EXFAT_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS3_FS is not set
# end of DOS/FAT/EXFAT/NT Filesystems

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
# CONFIG_PROC_CHILDREN is not set
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
# CONFIG_CONFIGFS_FS is not set
# end of Pseudo filesystems

# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NLS is not set
# CONFIG_UNICODE is not set
# end of File systems

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_FORTIFY_SOURCE is not set
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="[]"

#
# Kernel hardening options
#

#
# Memory initialization
#
CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_BARE=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
# CONFIG_INIT_STACK_NONE is not set
# CONFIG_INIT_STACK_ALL_PATTERN is not set
CONFIG_INIT_STACK_ALL_ZERO=y
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
# CONFIG_ZERO_CALL_USED_REGS is not set
# end of Memory initialization

CONFIG_RANDSTRUCT_NONE=y
# CONFIG_RANDSTRUCT_FULL is not set
# CONFIG_RANDSTRUCT_PERFORMANCE is not set
# end of Kernel hardening options
# end of Security options

# CONFIG_CRYPTO is not set

#
# Library routines
#
# CONFIG_PACKING is not set
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
# CONFIG_CORDIC is not set
# CONFIG_PRIME_NUMBERS is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y

#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
# CONFIG_CRYPTO_LIB_CHACHA is not set
# CONFIG_CRYPTO_LIB_CURVE25519 is not set
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1
# CONFIG_CRYPTO_LIB_POLY1305 is not set
# end of Crypto library routines

# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC64_ROCKSOFT is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC64 is not set
# CONFIG_CRC4 is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
# CONFIG_CRC8 is not set
CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZSTD_COMMON=y
CONFIG_ZSTD_DECOMPRESS=y
# CONFIG_XZ_DEC is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_ZSTD=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DMA_DECLARE_COHERENT=y
CONFIG_DMA_NONCOHERENT_MMAP=y
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_FORCE_NR_CPUS is not set
# CONFIG_IRQ_POLL is not set
CONFIG_LIBFDT=y
CONFIG_SG_POOL=y
CONFIG_UACCESS_MEMCPY=y
CONFIG_ARCH_STACKWALK=y
CONFIG_SBITMAP=y
# end of Library routines

CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y

#
# Kernel hacking
#

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
# CONFIG_PRINTK_CALLER is not set
# CONFIG_STACKTRACE_BUILD_ID is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DYNAMIC_DEBUG_CORE is not set
CONFIG_SYMBOLIC_ERRNAME=y
CONFIG_DEBUG_BUGVERBOSE=y
# end of printk and dmesg options

CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MISC=y

#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO_NONE=y
# CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT is not set
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_DEBUG_INFO_DWARF5 is not set
CONFIG_FRAME_WARN=2048
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_HEADERS_INSTALL is not set
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_VMLINUX_MAP is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options

#
# Generic Kernel Debugging Instruments
#
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_FS is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_KGDB_QXFER_PKT=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_UBSAN is not set
CONFIG_HAVE_KCSAN_COMPILER=y
# end of Generic Kernel Debugging Instruments

#
# Networking Debugging
#
# end of Networking Debugging

#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_PAGE_POISONING is not set
CONFIG_ARCH_HAS_DEBUG_WX=y
# CONFIG_DEBUG_OBJECTS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_SCHED_STACK_END_CHECK is not set
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_NOMMU_REGIONS is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
# end of Memory Debugging

# CONFIG_DEBUG_SHIRQ is not set

#
# Debug Oops, Lockups and Hangs
#
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
# CONFIG_SOFTLOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_WQ_WATCHDOG is not set
# end of Debug Oops, Lockups and Hangs

#
# Scheduler Debugging
#
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# end of Scheduler Debugging

# CONFIG_DEBUG_TIMEKEEPING is not set

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
# CONFIG_SCF_TORTURE_TEST is not set
# CONFIG_CSD_LOCK_WAIT_DEBUG is not set
# end of Lock Debugging (spinlocks, mutexes, etc...)

# CONFIG_DEBUG_IRQFLAGS is not set
# CONFIG_STACKTRACE is not set
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set

#
# Debug kernel data structures
#
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_PLIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# CONFIG_DEBUG_MAPLE_TREE is not set
# end of Debug kernel data structures

# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
# CONFIG_RCU_SCALE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_REF_SCALE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_EXP_CPU_STALL_TIMEOUT=0
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging

# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set

#
# riscv Debugging
#
# end of riscv Debugging

#
# Kernel Testing and Coverage
#
# CONFIG_KUNIT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_KCOV is not set
# CONFIG_RUNTIME_TESTING_MENU is not set
CONFIG_ARCH_USE_MEMTEST=y
# CONFIG_MEMTEST is not set
# end of Kernel Testing and Coverage

#
# Rust hacking
#
# end of Rust hacking
# end of Kernel hacking

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH RESEND] riscv: asid: Fixup stale TLB entry cause application crash
  2022-11-08 10:20 [PATCH RESEND] riscv: asid: Fixup stale TLB entry cause application crash guoren
  2022-11-08 10:27 ` Conor Dooley
  2022-11-09  1:42 ` kernel test robot
@ 2022-11-09  2:33 ` kernel test robot
  2 siblings, 0 replies; 7+ messages in thread
From: kernel test robot @ 2022-11-09  2:33 UTC (permalink / raw)
  To: guoren, anup, paul.walmsley, palmer, conor.dooley, heiko,
	philipp.tomsich
  Cc: oe-kbuild-all, linux-riscv, linux-kernel, Guo Ren, Anup Patel,
	Palmer Dabbelt

[-- Attachment #1: Type: text/plain, Size: 1832 bytes --]

Hi,

I love your patch! Yet something to improve:

[auto build test ERROR on linus/master]
[also build test ERROR on v6.1-rc4 next-20221108]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/guoren-kernel-org/riscv-asid-Fixup-stale-TLB-entry-cause-application-crash/20221108-182151
patch link:    https://lore.kernel.org/r/20221108102044.3317793-1-guoren%40kernel.org
patch subject: [PATCH RESEND] riscv: asid: Fixup stale TLB entry cause application crash
config: riscv-nommu_k210_defconfig
compiler: riscv64-linux-gcc (GCC) 12.1.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/intel-lab-lkp/linux/commit/025af39c1eb149e584705dfc72ac117812c82f3e
        git remote add linux-review https://github.com/intel-lab-lkp/linux
        git fetch --no-tags linux-review guoren-kernel-org/riscv-asid-Fixup-stale-TLB-entry-cause-application-crash/20221108-182151
        git checkout 025af39c1eb149e584705dfc72ac117812c82f3e
        # save the config file
        mkdir build_dir && cp config build_dir/.config
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=riscv SHELL=/bin/bash

If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

   riscv64-linux-ld: arch/riscv/mm/context.o: in function `.L0 ':
>> context.c:(.text+0x2e): undefined reference to `use_asid_allocator'

-- 
0-DAY CI Kernel Test Service
https://01.org/lkp

[-- Attachment #2: config --]
[-- Type: text/plain, Size: 36012 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/riscv 6.1.0-rc4 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="riscv64-linux-gcc (GCC) 12.1.0"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=120100
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=23800
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=23800
CONFIG_LLD_VERSION=0
CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=123
CONFIG_IRQ_WORK=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_BUILD_SALT=""
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SYSVIPC is not set
# CONFIG_WATCH_QUEUE is not set
# CONFIG_USELIB is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# end of IRQ subsystem

CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
CONFIG_ARCH_CLOCKSOURCE_INIT=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_HAS_TICK_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK=y
CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y
CONFIG_CONTEXT_TRACKING=y
CONFIG_CONTEXT_TRACKING_IDLE=y

#
# Timers subsystem
#
CONFIG_HZ_PERIODIC=y
# CONFIG_NO_HZ_IDLE is not set
# CONFIG_NO_HZ_FULL is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
# end of Timers subsystem

#
# BPF subsystem
#
# CONFIG_BPF_SYSCALL is not set
# end of BPF subsystem

CONFIG_PREEMPT_NONE_BUILD=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting

# CONFIG_CPU_ISOLATION is not set

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
# end of RCU Subsystem

# CONFIG_IKCONFIG is not set
# CONFIG_IKHEADERS is not set
CONFIG_LOG_BUF_SHIFT=13
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=12
CONFIG_GENERIC_SCHED_CLOCK=y

#
# Scheduler features
#
# end of Scheduler features

CONFIG_CC_HAS_INT128=y
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
CONFIG_GCC12_NO_ARRAY_BOUNDS=y
CONFIG_CC_NO_ARRAY_BOUNDS=y
CONFIG_ARCH_SUPPORTS_INT128=y
# CONFIG_CGROUPS is not set
# CONFIG_NAMESPACES is not set
# CONFIG_CHECKPOINT_RESTORE is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_INITRAMFS_FORCE is not set
# CONFIG_RD_GZIP is not set
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not set
# CONFIG_RD_LZ4 is not set
# CONFIG_RD_ZSTD is not set
# CONFIG_BOOT_CONFIG is not set
CONFIG_INITRAMFS_PRESERVE_MTIME=y
# CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_EXPERT=y
CONFIG_MULTIUSER=y
# CONFIG_SGETMASK_SYSCALL is not set
# CONFIG_SYSFS_SYSCALL is not set
# CONFIG_FHANDLE is not set
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
# CONFIG_AIO is not set
# CONFIG_IO_URING is not set
# CONFIG_ADVISE_SYSCALLS is not set
CONFIG_MEMBARRIER=y
# CONFIG_KALLSYMS is not set
# CONFIG_KCMP is not set
CONFIG_RSEQ=y
# CONFIG_DEBUG_RSEQ is not set
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
# CONFIG_PC104 is not set

#
# Kernel Performance Events And Counters
#
# CONFIG_PERF_EVENTS is not set
# end of Kernel Performance Events And Counters

# CONFIG_PROFILING is not set
# end of General setup

CONFIG_64BIT=y
CONFIG_RISCV=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=18
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_BITS_MAX=24
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=17
CONFIG_RISCV_M_MODE=y
# CONFIG_MMU is not set
CONFIG_PAGE_OFFSET=0x80000000
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_CSUM=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_PGTABLE_LEVELS=5
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_AS_HAS_INSN=y

#
# SoC selection
#
# CONFIG_SOC_MICROCHIP_POLARFIRE is not set
# CONFIG_SOC_SIFIVE is not set
# CONFIG_SOC_STARFIVE is not set
# CONFIG_SOC_VIRT is not set
CONFIG_SOC_CANAAN=y
CONFIG_SOC_CANAAN_K210_DTB_BUILTIN=y
CONFIG_SOC_CANAAN_K210_DTB_SOURCE="k210_generic"
# end of SoC selection

#
# CPU errata selection
#
# CONFIG_ERRATA_SIFIVE is not set
# CONFIG_ERRATA_THEAD is not set
# end of CPU errata selection

#
# Platform type
#
CONFIG_NONPORTABLE=y
# CONFIG_ARCH_RV32I is not set
CONFIG_ARCH_RV64I=y
# CONFIG_CMODEL_MEDLOW is not set
CONFIG_CMODEL_MEDANY=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
# CONFIG_HOTPLUG_CPU is not set
CONFIG_TUNE_GENERIC=y
CONFIG_RISCV_ISA_C=y
CONFIG_TOOLCHAIN_HAS_ZIHINTPAUSE=y
CONFIG_FPU=y
# end of Platform type

#
# Kernel features
#
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_RISCV_BOOT_SPINWAIT=y
# CONFIG_KEXEC_FILE is not set
# CONFIG_CRASH_DUMP is not set
# end of Kernel features

#
# Boot options
#
CONFIG_CMDLINE="earlycon console=ttySIF0"
# CONFIG_CMDLINE_FALLBACK is not set
# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE_FORCE=y
CONFIG_CC_HAVE_STACKPROTECTOR_TLS=y
# CONFIG_PHYS_RAM_BASE_FIXED is not set
# end of Boot options

CONFIG_BUILTIN_DTB=y

#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
# end of Power management options

#
# CPU Power Management
#

#
# CPU Idle
#
# CONFIG_CPU_IDLE is not set
# end of CPU Idle
# end of CPU Power Management

# CONFIG_VIRTUALIZATION is not set

#
# General architecture-dependent options
#
# CONFIG_JUMP_LABEL is not set
CONFIG_HAVE_64BIT_ALIGNED_ACCESS=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
# CONFIG_SECCOMP is not set
CONFIG_HAVE_STACKPROTECTOR=y
# CONFIG_STACKPROTECTOR is not set
CONFIG_LTO_NONE=y
CONFIG_HAVE_CONTEXT_TRACKING_USER=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PUD=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_CLONE_BACKWARDS=y
# CONFIG_COMPAT_32BIT_TIME is not set
CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y

#
# GCOV-based kernel profiling
#
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling

CONFIG_HAVE_GCC_PLUGINS=y
# CONFIG_GCC_PLUGINS is not set
# end of General architecture-dependent options

CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
# CONFIG_BLOCK is not set
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_MMIOWB=y
CONFIG_MMIOWB=y

#
# Executable file formats
#
CONFIG_BINFMT_SCRIPT=y
CONFIG_ARCH_HAS_BINFMT_FLAT=y
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_FLAT_NO_DATA_START_OFFSET=y
# CONFIG_BINFMT_FLAT_OLD is not set
# CONFIG_BINFMT_ZFLAT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_COREDUMP is not set
# end of Executable file formats

#
# Memory Management options
#

#
# SLAB allocator options
#
# CONFIG_SLAB is not set
# CONFIG_SLUB is not set
CONFIG_SLOB=y
# end of SLAB allocator options

# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_MMAP_ALLOW_UNINITIALIZED is not set
CONFIG_FLATMEM=y
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
# CONFIG_PAGE_REPORTING is not set
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_NEED_PER_CPU_KM=y
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_ARCH_HAS_CURRENT_STACK_POINTER=y
CONFIG_ZONE_DMA32=y
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_PERCPU_STATS is not set

#
# GUP_TEST needs to have DEBUG_FS enabled
#
CONFIG_ARCH_HAS_PTE_SPECIAL=y

#
# Data Access Monitoring
#
# CONFIG_DAMON is not set
# end of Data Access Monitoring
# end of Memory Management options

# CONFIG_NET is not set

#
# Device Drivers
#
CONFIG_HAVE_PCI=y
# CONFIG_PCI is not set
# CONFIG_PCCARD is not set

#
# Generic Driver Options
#
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_DEVTMPFS_SAFE is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y

#
# Firmware loader
#
# CONFIG_FW_LOADER is not set
# end of Firmware loader

# CONFIG_ALLOW_DEV_COREDUMP is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
CONFIG_REGMAP=y
CONFIG_REGMAP_MMIO=y
CONFIG_GENERIC_ARCH_TOPOLOGY=y
# end of Generic Driver Options

#
# Bus devices
#
# CONFIG_MOXTET is not set
# CONFIG_MHI_BUS is not set
# CONFIG_MHI_BUS_EP is not set
# end of Bus devices

#
# Firmware Drivers
#

#
# ARM System Control and Management Interface Protocol
#
# end of ARM System Control and Management Interface Protocol

# CONFIG_FIRMWARE_MEMMAP is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers

# CONFIG_GNSS is not set
# CONFIG_MTD is not set
CONFIG_DTC=y
CONFIG_OF=y
# CONFIG_OF_UNITTEST is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_RESERVED_MEM=y
# CONFIG_OF_OVERLAY is not set
CONFIG_OF_DMA_DEFAULT_COHERENT=y
# CONFIG_PARPORT is not set

#
# NVME Support
#
# end of NVME Support

#
# Misc devices
#
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
# CONFIG_XILINX_SDFEC is not set
# CONFIG_OPEN_DICE is not set
# CONFIG_VCPU_STALL_DETECTOR is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_EEPROM_93XX46 is not set
# CONFIG_EEPROM_IDT_89HPESX is not set
# CONFIG_EEPROM_EE1004 is not set
# end of EEPROM support

#
# Texas Instruments shared transport line discipline
#
# end of Texas Instruments shared transport line discipline

# CONFIG_ALTERA_STAPL is not set
# CONFIG_ECHO is not set
# CONFIG_PVPANIC is not set
# end of Misc devices

#
# SCSI device support
#
# end of SCSI device support

#
# Input device support
#
# CONFIG_INPUT is not set

#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
# end of Hardware I/O ports
# end of Input device support

#
# Character devices
#
CONFIG_TTY=y
# CONFIG_VT is not set
# CONFIG_UNIX98_PTYS is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_LDISC_AUTOLOAD is not set

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
# CONFIG_SERIAL_8250 is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_SIFIVE=y
CONFIG_SERIAL_SIFIVE_CONSOLE=y
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_FSL_LINFLEXUART is not set
# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
# CONFIG_SERIAL_SPRD is not set
# end of Serial drivers

# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NULL_TTY is not set
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_TTY_PRINTK is not set
# CONFIG_VIRTIO_CONSOLE is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_DEVMEM is not set
# CONFIG_TCG_TPM is not set
# CONFIG_XILLYBUS is not set
CONFIG_RANDOM_TRUST_CPU=y
CONFIG_RANDOM_TRUST_BOOTLOADER=y
# end of Character devices

#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_MUX is not set
# CONFIG_I2C_HELPER_AUTO is not set
# CONFIG_I2C_SMBUS is not set

#
# I2C Algorithms
#
# CONFIG_I2C_ALGOBIT is not set
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set
# end of I2C Algorithms

#
# I2C Hardware Bus support
#

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
CONFIG_I2C_DESIGNWARE_CORE=y
# CONFIG_I2C_DESIGNWARE_SLAVE is not set
CONFIG_I2C_DESIGNWARE_PLATFORM=y
# CONFIG_I2C_EMEV2 is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_RK3X is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_TAOS_EVM is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_VIRTIO is not set
# end of I2C Hardware Bus support

# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support

# CONFIG_I3C is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
# CONFIG_SPI_MEM is not set

#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_AXI_SPI_ENGINE is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_CADENCE is not set
CONFIG_SPI_DESIGNWARE=y
# CONFIG_SPI_DW_DMA is not set
CONFIG_SPI_DW_MMIO=y
# CONFIG_SPI_NXP_FLEXSPI is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_FSL_SPI is not set
# CONFIG_SPI_MICROCHIP_CORE is not set
# CONFIG_SPI_MICROCHIP_CORE_QSPI is not set
# CONFIG_SPI_OC_TINY is not set
# CONFIG_SPI_ROCKCHIP is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_SIFIVE is not set
# CONFIG_SPI_MXIC is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_ZYNQMP_GQSPI is not set
# CONFIG_SPI_AMD is not set

#
# SPI Multiplexer support
#
# CONFIG_SPI_MUX is not set

#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_SPI_SLAVE is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
# CONFIG_PPS is not set

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK_OPTIONAL=y

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# end of PTP clock support

CONFIG_PINCTRL=y
CONFIG_PINMUX=y
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
# CONFIG_PINCTRL_CY8C95X0 is not set
CONFIG_PINCTRL_K210=y
# CONFIG_PINCTRL_MCP23S08 is not set
# CONFIG_PINCTRL_MICROCHIP_SGPIO is not set
# CONFIG_PINCTRL_OCELOT is not set
# CONFIG_PINCTRL_SINGLE is not set
# CONFIG_PINCTRL_STMFX is not set
# CONFIG_PINCTRL_SX150X is not set

#
# Renesas pinctrl drivers
#
# end of Renesas pinctrl drivers

CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_OF_GPIO=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
CONFIG_GPIO_CDEV=y
# CONFIG_GPIO_CDEV_V1 is not set
CONFIG_GPIO_GENERIC=y

#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_74XX_MMIO is not set
# CONFIG_GPIO_ALTERA is not set
# CONFIG_GPIO_CADENCE is not set
CONFIG_GPIO_DWAPB=y
# CONFIG_GPIO_FTGPIO010 is not set
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_GRGPIO is not set
# CONFIG_GPIO_HLWD is not set
# CONFIG_GPIO_LOGICVC is not set
# CONFIG_GPIO_MB86S7X is not set
CONFIG_GPIO_SIFIVE=y
# CONFIG_GPIO_SYSCON is not set
# CONFIG_GPIO_XILINX is not set
# CONFIG_GPIO_AMD_FCH is not set
# end of Memory mapped GPIO drivers

#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADNP is not set
# CONFIG_GPIO_GW_PLD is not set
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCA9570 is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_TPIC2810 is not set
# end of I2C GPIO expanders

#
# MFD GPIO expanders
#
# end of MFD GPIO expanders

#
# SPI GPIO expanders
#
# CONFIG_GPIO_74X164 is not set
# CONFIG_GPIO_MAX3191X is not set
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_PISOSR is not set
# CONFIG_GPIO_XRA1403 is not set
# end of SPI GPIO expanders

#
# Virtual GPIO drivers
#
# CONFIG_GPIO_AGGREGATOR is not set
# CONFIG_GPIO_MOCKUP is not set
# CONFIG_GPIO_SIM is not set
# end of Virtual GPIO drivers

# CONFIG_W1 is not set
CONFIG_POWER_RESET=y
# CONFIG_POWER_RESET_GPIO is not set
# CONFIG_POWER_RESET_GPIO_RESTART is not set
# CONFIG_POWER_RESET_LTC2952 is not set
# CONFIG_POWER_RESET_RESTART is not set
CONFIG_POWER_RESET_SYSCON=y
# CONFIG_POWER_RESET_SYSCON_POWEROFF is not set
# CONFIG_SYSCON_REBOOT_MODE is not set
# CONFIG_NVMEM_REBOOT_MODE is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_ACT8945A is not set
# CONFIG_MFD_AS3711 is not set
# CONFIG_MFD_AS3722 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_ATMEL_FLEXCOM is not set
# CONFIG_MFD_ATMEL_HLCDC is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_BD9571MWV is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_MADERA is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_GATEWORKS_GSC is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_MFD_MP2629 is not set
# CONFIG_MFD_HI6421_PMIC is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_MFD_IQS62X is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77620 is not set
# CONFIG_MFD_MAX77650 is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77714 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6360 is not set
# CONFIG_MFD_MT6370 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_MFD_OCELOT is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_CPCAP is not set
# CONFIG_MFD_NTXEC is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_SY7636A is not set
# CONFIG_MFD_RT4831 is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RT5120 is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_RK808 is not set
# CONFIG_MFD_RN5T618 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_STMPE is not set
CONFIG_MFD_SYSCON=y
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_TI_LMU is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TI_LP87565 is not set
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TQMX86 is not set
# CONFIG_MFD_LOCHNAGAR is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_ROHM_BD718XX is not set
# CONFIG_MFD_ROHM_BD71828 is not set
# CONFIG_MFD_ROHM_BD957XMUF is not set
# CONFIG_MFD_STPMIC1 is not set
# CONFIG_MFD_STMFX is not set
# CONFIG_MFD_ATC260X_I2C is not set
# CONFIG_MFD_QCOM_PM8008 is not set
# CONFIG_MFD_INTEL_M10_BMC is not set
# CONFIG_MFD_RSMU_I2C is not set
# CONFIG_MFD_RSMU_SPI is not set
# end of Multifunction device drivers

# CONFIG_REGULATOR is not set

#
# CEC support
#
# CONFIG_MEDIA_CEC_SUPPORT is not set
# end of CEC support

# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
# CONFIG_DRM is not set
# CONFIG_DRM_DEBUG_MODESET_LOCK is not set

#
# ARM devices
#
# end of ARM devices

#
# Frame buffer Devices
#
# CONFIG_FB is not set
# end of Frame buffer Devices

#
# Backlight & LCD device support
#
# CONFIG_LCD_CLASS_DEVICE is not set
# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
# end of Backlight & LCD device support
# end of Graphics support

# CONFIG_SOUND is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
# CONFIG_LEDS_CLASS_MULTICOLOR is not set
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set

#
# LED drivers
#
# CONFIG_LEDS_AN30259A is not set
# CONFIG_LEDS_AW2013 is not set
# CONFIG_LEDS_BCM6328 is not set
# CONFIG_LEDS_BCM6358 is not set
# CONFIG_LEDS_CR0014114 is not set
# CONFIG_LEDS_EL15203000 is not set
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3532 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_LM3692X is not set
CONFIG_LEDS_GPIO=y
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP3952 is not set
# CONFIG_LEDS_LP55XX_COMMON is not set
# CONFIG_LEDS_LP8860 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_LT3593 is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_IS31FL319X is not set
# CONFIG_LEDS_IS31FL32XX is not set

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set
# CONFIG_LEDS_SYSCON is not set
# CONFIG_LEDS_MLXREG is not set
CONFIG_LEDS_USER=y
# CONFIG_LEDS_SPI_BYTE is not set
# CONFIG_LEDS_TI_LMU_COMMON is not set

#
# Flash and Torch LED drivers
#

#
# RGB LED drivers
#

#
# LED Triggers
#
# CONFIG_LEDS_TRIGGERS is not set

#
# Simple LED drivers
#
# CONFIG_ACCESSIBILITY is not set
CONFIG_EDAC_SUPPORT=y
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set

#
# DMABUF options
#
# CONFIG_SYNC_FILE is not set
# CONFIG_DMABUF_HEAPS is not set
# end of DMABUF options

# CONFIG_AUXDISPLAY is not set
# CONFIG_VFIO is not set
# CONFIG_VIRT_DRIVERS is not set
# CONFIG_VIRTIO_MENU is not set
# CONFIG_VHOST_MENU is not set

#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support

# CONFIG_GREYBUS is not set
# CONFIG_COMEDI is not set
# CONFIG_STAGING is not set
# CONFIG_GOLDFISH is not set
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
# CONFIG_LMK04832 is not set
# CONFIG_COMMON_CLK_MAX9485 is not set
# CONFIG_COMMON_CLK_SI5341 is not set
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_SI514 is not set
# CONFIG_COMMON_CLK_SI544 is not set
# CONFIG_COMMON_CLK_SI570 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_CDCE925 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not set
# CONFIG_COMMON_CLK_AXI_CLKGEN is not set
# CONFIG_COMMON_CLK_RS9_PCIE is not set
# CONFIG_COMMON_CLK_VC5 is not set
# CONFIG_COMMON_CLK_VC7 is not set
# CONFIG_COMMON_CLK_FIXED_MMIO is not set
CONFIG_COMMON_CLK_K210=y
# CONFIG_XILINX_VCU is not set
# CONFIG_COMMON_CLK_XLNX_CLKWZRD is not set
# CONFIG_HWSPINLOCK is not set

#
# Clock Source drivers
#
CONFIG_TIMER_OF=y
CONFIG_TIMER_PROBE=y
CONFIG_CLINT_TIMER=y
# CONFIG_MICROCHIP_PIT64B is not set
# end of Clock Source drivers

# CONFIG_MAILBOX is not set

#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers

#
# Rpmsg drivers
#
# CONFIG_RPMSG_VIRTIO is not set
# end of Rpmsg drivers

# CONFIG_SOUNDWIRE is not set

#
# SOC (System On Chip) specific Drivers
#

#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers

#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers

CONFIG_SOC_K210_SYSCTL=y

#
# NXP/Freescale QorIQ SoC drivers
#
# end of NXP/Freescale QorIQ SoC drivers

#
# fujitsu SoC drivers
#
# end of fujitsu SoC drivers

#
# i.MX SoC drivers
#
# end of i.MX SoC drivers

#
# Enable LiteX SoC Builder specific drivers
#
# CONFIG_LITEX_SOC_CONTROLLER is not set
# end of Enable LiteX SoC Builder specific drivers

#
# Qualcomm SoC drivers
#
# end of Qualcomm SoC drivers

# CONFIG_SOC_TI is not set

#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers

# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_PWM is not set

#
# IRQ chip support
#
CONFIG_IRQCHIP=y
# CONFIG_AL_FIC is not set
# CONFIG_XILINX_INTC is not set
CONFIG_RISCV_INTC=y
CONFIG_SIFIVE_PLIC=y
# end of IRQ chip support

# CONFIG_IPACK_BUS is not set
CONFIG_ARCH_HAS_RESET_CONTROLLER=y
CONFIG_RESET_CONTROLLER=y
CONFIG_RESET_K210=y
# CONFIG_RESET_SIMPLE is not set
# CONFIG_RESET_TI_SYSCON is not set
# CONFIG_RESET_TI_TPS380X is not set

#
# PHY Subsystem
#
# CONFIG_GENERIC_PHY is not set
# CONFIG_PHY_CAN_TRANSCEIVER is not set

#
# PHY drivers for Broadcom platforms
#
# CONFIG_BCM_KONA_USB2_PHY is not set
# end of PHY drivers for Broadcom platforms

# CONFIG_PHY_CADENCE_TORRENT is not set
# CONFIG_PHY_CADENCE_DPHY is not set
# CONFIG_PHY_CADENCE_DPHY_RX is not set
# CONFIG_PHY_CADENCE_SIERRA is not set
# CONFIG_PHY_CADENCE_SALVO is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_LAN966X_SERDES is not set
# CONFIG_PHY_OCELOT_SERDES is not set
# end of PHY Subsystem

# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set
# CONFIG_RAS is not set

#
# Android
#
# end of Android

# CONFIG_DAX is not set
# CONFIG_NVMEM is not set

#
# HW tracing support
#
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set
# end of HW tracing support

# CONFIG_FPGA is not set
# CONFIG_FSI is not set
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set
# CONFIG_INTERCONNECT is not set
# CONFIG_COUNTER is not set
# CONFIG_PECI is not set
# CONFIG_HTE is not set
# end of Device Drivers

#
# File systems
#
# CONFIG_VALIDATE_FS_PARSER is not set
# CONFIG_EXPORTFS_BLOCK_OPS is not set
# CONFIG_FILE_LOCKING is not set
# CONFIG_FS_ENCRYPTION is not set
# CONFIG_FS_VERITY is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY_USER is not set
# CONFIG_FANOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_OVERLAY_FS is not set

#
# Caches
#
# CONFIG_FSCACHE is not set
# end of Caches

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
# CONFIG_PROC_CHILDREN is not set
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
# CONFIG_CONFIGFS_FS is not set
# end of Pseudo filesystems

# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NLS is not set
# CONFIG_UNICODE is not set
# end of File systems

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_FORTIFY_SOURCE is not set
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="[]"

#
# Kernel hardening options
#

#
# Memory initialization
#
CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_BARE=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
# CONFIG_INIT_STACK_NONE is not set
# CONFIG_INIT_STACK_ALL_PATTERN is not set
CONFIG_INIT_STACK_ALL_ZERO=y
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
# CONFIG_ZERO_CALL_USED_REGS is not set
# end of Memory initialization

CONFIG_RANDSTRUCT_NONE=y
# end of Kernel hardening options
# end of Security options

# CONFIG_CRYPTO is not set

#
# Library routines
#
# CONFIG_PACKING is not set
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
# CONFIG_CORDIC is not set
# CONFIG_PRIME_NUMBERS is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y

#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
# CONFIG_CRYPTO_LIB_CHACHA is not set
# CONFIG_CRYPTO_LIB_CURVE25519 is not set
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1
# CONFIG_CRYPTO_LIB_POLY1305 is not set
# end of Crypto library routines

# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC64_ROCKSOFT is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC64 is not set
# CONFIG_CRC4 is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
# CONFIG_CRC8 is not set
# CONFIG_RANDOM32_SELFTEST is not set
# CONFIG_XZ_DEC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DMA_DECLARE_COHERENT=y
CONFIG_DMA_NONCOHERENT_MMAP=y
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_FORCE_NR_CPUS is not set
# CONFIG_IRQ_POLL is not set
CONFIG_LIBFDT=y
CONFIG_UACCESS_MEMCPY=y
CONFIG_ARCH_STACKWALK=y
# end of Library routines

CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y

#
# Kernel hacking
#

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
# CONFIG_PRINTK_CALLER is not set
# CONFIG_STACKTRACE_BUILD_ID is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DYNAMIC_DEBUG_CORE is not set
# CONFIG_SYMBOLIC_ERRNAME is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# end of printk and dmesg options

CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_MISC is not set

#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO_NONE=y
# CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT is not set
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_DEBUG_INFO_DWARF5 is not set
CONFIG_FRAME_WARN=2048
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_HEADERS_INSTALL is not set
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
# CONFIG_FRAME_POINTER is not set
# CONFIG_VMLINUX_MAP is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options

#
# Generic Kernel Debugging Instruments
#
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_FS is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_KGDB_QXFER_PKT=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_UBSAN is not set
CONFIG_HAVE_KCSAN_COMPILER=y
# end of Generic Kernel Debugging Instruments

#
# Networking Debugging
#
# end of Networking Debugging

#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_PAGE_POISONING is not set
CONFIG_ARCH_HAS_DEBUG_WX=y
# CONFIG_DEBUG_OBJECTS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_SCHED_STACK_END_CHECK is not set
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_NOMMU_REGIONS is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
# end of Memory Debugging

# CONFIG_DEBUG_SHIRQ is not set

#
# Debug Oops, Lockups and Hangs
#
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
# CONFIG_SOFTLOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_WQ_WATCHDOG is not set
# end of Debug Oops, Lockups and Hangs

#
# Scheduler Debugging
#
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# end of Scheduler Debugging

# CONFIG_DEBUG_TIMEKEEPING is not set

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
# CONFIG_SCF_TORTURE_TEST is not set
# CONFIG_CSD_LOCK_WAIT_DEBUG is not set
# end of Lock Debugging (spinlocks, mutexes, etc...)

# CONFIG_DEBUG_IRQFLAGS is not set
# CONFIG_STACKTRACE is not set
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set

#
# Debug kernel data structures
#
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_PLIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# CONFIG_DEBUG_MAPLE_TREE is not set
# end of Debug kernel data structures

# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
# CONFIG_RCU_SCALE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_REF_SCALE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_EXP_CPU_STALL_TIMEOUT=0
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging

# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set

#
# riscv Debugging
#
# end of riscv Debugging

#
# Kernel Testing and Coverage
#
# CONFIG_KUNIT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_KCOV is not set
# CONFIG_RUNTIME_TESTING_MENU is not set
CONFIG_ARCH_USE_MEMTEST=y
# CONFIG_MEMTEST is not set
# end of Kernel Testing and Coverage

#
# Rust hacking
#
# end of Rust hacking
# end of Kernel hacking

^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2022-11-09  2:33 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2022-11-08 10:20 [PATCH RESEND] riscv: asid: Fixup stale TLB entry cause application crash guoren
2022-11-08 10:27 ` Conor Dooley
2022-11-08 14:22   ` Conor Dooley
2022-11-09  0:30     ` Guo Ren
2022-11-09  0:30   ` Guo Ren
2022-11-09  1:42 ` kernel test robot
2022-11-09  2:33 ` kernel test robot

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox