Re: [PATCH v2 4/4] Documentation: perf: Indent filter options list of hisi-pcie-pmu

[Jonathan Cameron <Jonathan.Cameron@Huawei.com>]

On Thu, 10 Nov 2022 16:51:09 +0800
Yicong Yang <yangyicong@huawei.com> wrote:

> From: Bagas Sanjaya <bagasdotme@gmail.com>
> 
> The "Filter options" list have a rather ugly indentation. Also, the first
> paragraph after list name is rendered without separator (as continuation
> from the name).
> 
> Align the list by indenting the list items and add a blank line
> separator for each list name.
> 
> Fixes: c8602008e247 ("docs: perf: Add description for HiSilicon PCIe PMU driver")
> Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Annoying though it is to do, this should be a precusors to the changes added earlier
in this series - or drop the fixes tag. I'd argue that 'ugly' isn't something that
we need to potentially backport fixes to.

Change itself looks fine though.

> ---
>  .../admin-guide/perf/hisi-pcie-pmu.rst        | 80 ++++++++++---------
>  1 file changed, 43 insertions(+), 37 deletions(-)
> 
> diff --git a/Documentation/admin-guide/perf/hisi-pcie-pmu.rst b/Documentation/admin-guide/perf/hisi-pcie-pmu.rst
> index b3615230a4f6..7e863662e2d4 100644
> --- a/Documentation/admin-guide/perf/hisi-pcie-pmu.rst
> +++ b/Documentation/admin-guide/perf/hisi-pcie-pmu.rst
> @@ -48,62 +48,68 @@ Filter options
>  --------------
>  
>  1. Target filter
> -PMU could only monitor the performance of traffic downstream target Root Ports
> -or downstream target Endpoint. PCIe PMU driver support "port" and "bdf"
> -interfaces for users, and these two interfaces aren't supported at the same
> -time.
>  
> --port
> -"port" filter can be used in all PCIe PMU events, target Root Port can be
> -selected by configuring the 16-bits-bitmap "port". Multi ports can be selected
> -for AP-layer-events, and only one port can be selected for TL/DL-layer-events.
> +   PMU could only monitor the performance of traffic downstream target Root
> +   Ports or downstream target Endpoint. PCIe PMU driver support "port" and
> +   "bdf" interfaces for users, and these two interfaces aren't supported at the
> +   same time.
>  
> -For example, if target Root Port is 0000:00:00.0 (x8 lanes), bit0 of bitmap
> -should be set, port=0x1; if target Root Port is 0000:00:04.0 (x4 lanes),
> -bit8 is set, port=0x100; if these two Root Ports are both monitored, port=0x101.
> +   - port
>  
> -Example usage of perf::
> +     "port" filter can be used in all PCIe PMU events, target Root Port can be
> +     selected by configuring the 16-bits-bitmap "port". Multi ports can be
> +     selected for AP-layer-events, and only one port can be selected for
> +     TL/DL-layer-events.
>  
> -  $# perf stat -e hisi_pcie0_core0/rx_mwr_latency,port=0x1/ sleep 5
> +     For example, if target Root Port is 0000:00:00.0 (x8 lanes), bit0 of
> +     bitmap should be set, port=0x1; if target Root Port is 0000:00:04.0 (x4
> +     lanes), bit8 is set, port=0x100; if these two Root Ports are both
> +     monitored, port=0x101.
>  
> --bdf
> +     Example usage of perf::
>  
> -"bdf" filter can only be used in bandwidth events, target Endpoint is selected
> -by configuring BDF to "bdf". Counter only counts the bandwidth of message
> -requested by target Endpoint.
> +       $# perf stat -e hisi_pcie0_core0/rx_mwr_latency,port=0x1/ sleep 5
>  
> -For example, "bdf=0x3900" means BDF of target Endpoint is 0000:39:00.0.
> +   - bdf
>  
> -Example usage of perf::
> +     "bdf" filter can only be used in bandwidth events, target Endpoint is
> +     selected by configuring BDF to "bdf". Counter only counts the bandwidth of
> +     message requested by target Endpoint.
> +
> +     For example, "bdf=0x3900" means BDF of target Endpoint is 0000:39:00.0.
>  
> -  $# perf stat -e hisi_pcie0_core0/rx_mrd_flux,bdf=0x3900/ sleep 5
> +     Example usage of perf::
> +
> +       $# perf stat -e hisi_pcie0_core0/rx_mrd_flux,bdf=0x3900/ sleep 5
>  
>  2. Trigger filter
> -Event statistics start when the first time TLP length is greater/smaller
> -than trigger condition. You can set the trigger condition by writing "trig_len",
> -and set the trigger mode by writing "trig_mode". This filter can only be used
> -in bandwidth events.
>  
> -For example, "trig_len=4" means trigger condition is 2^4 DW, "trig_mode=0"
> -means statistics start when TLP length > trigger condition, "trig_mode=1"
> -means start when TLP length < condition.
> +   Event statistics start when the first time TLP length is greater/smaller
> +   than trigger condition. You can set the trigger condition by writing
> +   "trig_len", and set the trigger mode by writing "trig_mode". This filter can
> +   only be used in bandwidth events.
>  
> -Example usage of perf::
> +   For example, "trig_len=4" means trigger condition is 2^4 DW, "trig_mode=0"
> +   means statistics start when TLP length > trigger condition, "trig_mode=1"
> +   means start when TLP length < condition.
>  
> -  $# perf stat -e hisi_pcie0_core0/rx_mrd_flux,trig_len=0x4,trig_mode=1/ sleep 5
> +   Example usage of perf::
> +
> +     $# perf stat -e hisi_pcie0_core0/rx_mrd_flux,trig_len=0x4,trig_mode=1/ sleep 5
>  
>  3. Threshold filter
> -Counter counts when TLP length within the specified range. You can set the
> -threshold by writing "thr_len", and set the threshold mode by writing
> -"thr_mode". This filter can only be used in bandwidth events.
>  
> -For example, "thr_len=4" means threshold is 2^4 DW, "thr_mode=0" means
> -counter counts when TLP length >= threshold, and "thr_mode=1" means counts
> -when TLP length < threshold.
> +   Counter counts when TLP length within the specified range. You can set the
> +   threshold by writing "thr_len", and set the threshold mode by writing
> +   "thr_mode". This filter can only be used in bandwidth events.
>  
> -Example usage of perf::
> +   For example, "thr_len=4" means threshold is 2^4 DW, "thr_mode=0" means
> +   counter counts when TLP length >= threshold, and "thr_mode=1" means counts
> +   when TLP length < threshold.
> +
> +   Example usage of perf::
>  
> -  $# perf stat -e hisi_pcie0_core0/rx_mrd_flux,thr_len=0x4,thr_mode=1/ sleep 5
> +     $# perf stat -e hisi_pcie0_core0/rx_mrd_flux,thr_len=0x4,thr_mode=1/ sleep 5
>  
>  4. TLP Length filter
>