From: Johan Hovold <johan+linaro@kernel.org>
To: Vinod Koul <vkoul@kernel.org>
Cc: Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org,
linux-kernel@vger.kernel.org,
Johan Hovold <johan+linaro@kernel.org>
Subject: [PATCH v2 14/22] phy: qcom-qmp-combo: clean up DP configurations
Date: Mon, 14 Nov 2022 12:06:13 +0100 [thread overview]
Message-ID: <20221114110621.4639-15-johan+linaro@kernel.org> (raw)
In-Reply-To: <20221114110621.4639-1-johan+linaro@kernel.org>
In preparation for merging the USB and DP configurations, align the
initialisations of the DP function pointers.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 40 +++++++++++------------
1 file changed, 20 insertions(+), 20 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index 43193bfe6e11..50c011d23a9e 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -1049,10 +1049,10 @@ static const struct qmp_phy_cfg sc7180_dpphy_cfg = {
.swing_hbr3_hbr2 = &qmp_dp_v3_voltage_swing_hbr3_hbr2,
.pre_emphasis_hbr3_hbr2 = &qmp_dp_v3_pre_emphasis_hbr3_hbr2,
- .dp_aux_init = qcom_qmp_v3_phy_dp_aux_init,
- .configure_dp_tx = qcom_qmp_v3_phy_configure_dp_tx,
- .configure_dp_phy = qcom_qmp_v3_phy_configure_dp_phy,
- .calibrate_dp_phy = qcom_qmp_v3_dp_phy_calibrate,
+ .dp_aux_init = qcom_qmp_v3_phy_dp_aux_init,
+ .configure_dp_tx = qcom_qmp_v3_phy_configure_dp_tx,
+ .configure_dp_phy = qcom_qmp_v3_phy_configure_dp_phy,
+ .calibrate_dp_phy = qcom_qmp_v3_dp_phy_calibrate,
};
static const struct qmp_phy_combo_cfg sc7180_usb3dpphy_cfg = {
@@ -1106,10 +1106,10 @@ static const struct qmp_phy_cfg sdm845_dpphy_cfg = {
.swing_hbr3_hbr2 = &qmp_dp_v3_voltage_swing_hbr3_hbr2,
.pre_emphasis_hbr3_hbr2 = &qmp_dp_v3_pre_emphasis_hbr3_hbr2,
- .dp_aux_init = qcom_qmp_v3_phy_dp_aux_init,
- .configure_dp_tx = qcom_qmp_v3_phy_configure_dp_tx,
- .configure_dp_phy = qcom_qmp_v3_phy_configure_dp_phy,
- .calibrate_dp_phy = qcom_qmp_v3_dp_phy_calibrate,
+ .dp_aux_init = qcom_qmp_v3_phy_dp_aux_init,
+ .configure_dp_tx = qcom_qmp_v3_phy_configure_dp_tx,
+ .configure_dp_phy = qcom_qmp_v3_phy_configure_dp_phy,
+ .calibrate_dp_phy = qcom_qmp_v3_dp_phy_calibrate,
};
static const struct qmp_phy_combo_cfg sdm845_usb3dpphy_cfg = {
@@ -1166,10 +1166,10 @@ static const struct qmp_phy_cfg sc8180x_dpphy_cfg = {
.swing_hbr3_hbr2 = &qmp_dp_v3_voltage_swing_hbr3_hbr2,
.pre_emphasis_hbr3_hbr2 = &qmp_dp_v3_pre_emphasis_hbr3_hbr2,
- .dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
- .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
- .configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
- .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
+ .dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
+ .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
+ .configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
+ .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
};
static const struct qmp_phy_combo_cfg sc8180x_usb3dpphy_cfg = {
@@ -1222,10 +1222,10 @@ static const struct qmp_phy_cfg sc8280xp_usb43dp_dp_cfg = {
.swing_hbr3_hbr2 = &qmp_dp_v5_voltage_swing_hbr3_hbr2,
.pre_emphasis_hbr3_hbr2 = &qmp_dp_v5_pre_emphasis_hbr3_hbr2,
- .dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
- .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
- .configure_dp_phy = qcom_qmp_v5_phy_configure_dp_phy,
- .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
+ .dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
+ .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
+ .configure_dp_phy = qcom_qmp_v5_phy_configure_dp_phy,
+ .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
};
static const struct qmp_phy_combo_cfg sc8280xp_usb43dpphy_combo_cfg = {
@@ -1282,10 +1282,10 @@ static const struct qmp_phy_cfg sm8250_dpphy_cfg = {
.swing_hbr3_hbr2 = &qmp_dp_v3_voltage_swing_hbr3_hbr2,
.pre_emphasis_hbr3_hbr2 = &qmp_dp_v3_pre_emphasis_hbr3_hbr2,
- .dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
- .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
- .configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
- .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
+ .dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
+ .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
+ .configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
+ .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
};
static const struct qmp_phy_combo_cfg sm8250_usb3dpphy_cfg = {
--
2.37.4
next prev parent reply other threads:[~2022-11-14 11:09 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-14 11:05 [PATCH v2 00/22] phy: qcom-qmp-combo: preparatory cleanups (set 2/3) Johan Hovold
2022-11-14 11:06 ` [PATCH v2 01/22] phy: qcom-qmp-combo: sort device-id table Johan Hovold
2022-11-14 11:06 ` [PATCH v2 02/22] phy: qcom-qmp-combo: move " Johan Hovold
2022-11-14 11:06 ` [PATCH v2 03/22] phy: qcom-qmp-combo: move pm ops Johan Hovold
2022-11-14 11:06 ` [PATCH v2 04/22] phy: qcom-qmp-combo: rename PHY ops structures Johan Hovold
2022-11-14 11:06 ` [PATCH v2 05/22] phy: qcom-qmp-combo: drop unused DP PHY mode op Johan Hovold
2022-11-14 11:06 ` [PATCH v2 06/22] phy: qcom-qmp-combo: rename USB PHY ops Johan Hovold
2022-11-14 11:06 ` [PATCH v2 07/22] phy: qcom-qmp-combo: drop unnecessary debug message Johan Hovold
2022-11-14 11:06 ` [PATCH v2 08/22] phy: qcom-qmp-combo: separate USB and DP init ops Johan Hovold
2022-11-14 11:06 ` [PATCH v2 09/22] phy: qcom-qmp-combo: rename DP PHY ops Johan Hovold
2022-11-14 11:06 ` [PATCH v2 10/22] phy: qcom-qmp-combo: separate USB and DP power-on ops Johan Hovold
2022-11-14 11:06 ` [PATCH v2 11/22] phy: qcom-qmp-combo: clean up serdes initialisation Johan Hovold
2022-11-14 11:06 ` [PATCH v2 12/22] phy: qcom-qmp-combo: separate USB and DP devicetree parsing Johan Hovold
2022-11-14 11:06 ` [PATCH v2 13/22] phy: qcom-qmp-combo: add dedicated DP iomem pointers Johan Hovold
2022-11-14 11:06 ` Johan Hovold [this message]
2022-11-14 11:06 ` [PATCH v2 15/22] phy: qcom-qmp-combo: rename sc8280xp config Johan Hovold
2022-11-14 11:06 ` [PATCH v2 16/22] phy: qcom-qmp-combo: add DP configuration tables Johan Hovold
2022-11-14 11:06 ` [PATCH v2 17/22] phy: qcom-qmp-combo: drop lanes config parameter Johan Hovold
2022-11-14 15:07 ` Dmitry Baryshkov
2022-11-14 11:06 ` [PATCH v2 18/22] phy: qcom-qmp-combo: merge USB and DP configurations Johan Hovold
2022-11-14 11:06 ` [PATCH v2 19/22] phy: qcom-qmp-combo: merge driver data Johan Hovold
2022-11-14 11:06 ` [PATCH v2 20/22] phy: qcom-qmp-combo: clean up device-tree parsing Johan Hovold
2022-11-14 11:06 ` [PATCH v2 21/22] phy: qcom-qmp-combo: clean up probe initialisation Johan Hovold
2022-11-14 11:06 ` [PATCH v2 22/22] phy: qcom-qmp-combo: clean up DP callback names Johan Hovold
2022-11-24 17:17 ` [PATCH v2 00/22] phy: qcom-qmp-combo: preparatory cleanups (set 2/3) Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221114110621.4639-15-johan+linaro@kernel.org \
--to=johan+linaro@kernel.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=konrad.dybcio@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox