Re: [PATCH v2 02/12] dt-bindings: display: msm: Add qcom,sm8350-mdss binding

[Rob Herring <robh@kernel.org>]

On Tue, Nov 15, 2022 at 12:17:11PM +0100, Robert Foss wrote:
> Mobile Display Subsystem (MDSS) encapsulates sub-blocks
> like DPU display controller, DSI etc. Add YAML schema for MDSS device
> tree bindings
> 
> Signed-off-by: Robert Foss <robert.foss@linaro.org>
> ---
>  .../display/msm/qcom,sm8350-mdss.yaml         | 240 ++++++++++++++++++
>  1 file changed, 240 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml
> new file mode 100644
> index 000000000000..9a0694853576
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml
> @@ -0,0 +1,240 @@
> +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/msm/qcom,sm8350-mdss.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm SM8350 Display MDSS
> +
> +maintainers:
> +  - Robert Foss <robert.foss@linaro.org>
> +
> +description:
> +  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates

Drop 'Device tree bindings for '. Describe what this h/w is.

> +  sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
> +  bindings of MDSS are mentioned for SM8350 target.
> +
> +$ref: /schemas/display/msm/mdss-common.yaml#
> +
> +properties:
> +  compatible:
> +    items:
> +      - const: qcom,sm8350-mdss
> +
> +  clocks:
> +    items:
> +      - description: Display AHB clock from gcc
> +      - description: Display hf axi clock
> +      - description: Display sf axi clock
> +      - description: Display core clock
> +
> +  clock-names:
> +    items:
> +      - const: iface
> +      - const: bus
> +      - const: nrt_bus
> +      - const: core
> +
> +  iommus:
> +    maxItems: 1
> +
> +  interconnects:
> +    maxItems: 2
> +
> +  interconnect-names:
> +    maxItems: 2

Need to define the names.

> +
> +patternProperties:
> +  "^display-controller@[0-9a-f]+$":
> +    type: object
> +    properties:
> +      compatible:
> +        const: qcom,sm8350-dpu
> +
> +  "^dsi@[0-9a-f]+$":
> +    type: object
> +    properties:
> +      compatible:
> +        const: qcom,mdss-dsi-ctrl
> +
> +  "^phy@[0-9a-f]+$":
> +    type: object
> +    properties:
> +      compatible:
> +        const: qcom,dsi-phy-5nm-8350
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/qcom,dispcc-sm8350.h>
> +    #include <dt-bindings/clock/qcom,gcc-sm8350.h>
> +    #include <dt-bindings/clock/qcom,rpmh.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/interconnect/qcom,sm8350.h>
> +    #include <dt-bindings/power/qcom-rpmpd.h>
> +
> +    display-subsystem@ae00000 {
> +        compatible = "qcom,sm8350-mdss";
> +        reg = <0x0ae00000 0x1000>;
> +        reg-names = "mdss";
> +
> +        interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>,
> +                        <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>;
> +        interconnect-names = "mdp0-mem", "mdp1-mem";
> +
> +        power-domains = <&dispcc MDSS_GDSC>;
> +        resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
> +
> +        clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
> +                 <&gcc GCC_DISP_HF_AXI_CLK>,
> +                 <&gcc GCC_DISP_SF_AXI_CLK>,
> +                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
> +        clock-names = "iface", "bus", "nrt_bus", "core";
> +
> +        iommus = <&apps_smmu 0x820 0x402>;
> +
> +        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> +        interrupt-controller;
> +        #interrupt-cells = <1>;
> +
> +        #address-cells = <1>;
> +        #size-cells = <1>;
> +        ranges;
> +
> +        display-controller@ae01000 {
> +            compatible = "qcom,sm8350-dpu";
> +            reg = <0x0ae01000 0x8f000>,
> +                  <0x0aeb0000 0x2008>;
> +            reg-names = "mdp", "vbif";
> +
> +            clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
> +                     <&gcc GCC_DISP_SF_AXI_CLK>,
> +                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
> +                     <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
> +                     <&dispcc DISP_CC_MDSS_MDP_CLK>,
> +                     <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
> +            clock-names = "bus",
> +                          "nrt_bus",
> +                          "iface",
> +                          "lut",
> +                          "core",
> +                          "vsync";
> +
> +            assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
> +            assigned-clock-rates = <19200000>;
> +
> +            operating-points-v2 = <&mdp_opp_table>;
> +            power-domains = <&rpmhpd SM8350_MMCX>;
> +
> +            interrupt-parent = <&mdss>;
> +            interrupts = <0>;
> +
> +            ports {
> +                #address-cells = <1>;
> +                #size-cells = <0>;
> +
> +                port@0 {
> +                    reg = <0>;
> +                    dpu_intf1_out: endpoint {
> +                        remote-endpoint = <&dsi0_in>;
> +                    };
> +                };
> +            };
> +
> +            mdp_opp_table: opp-table {
> +                compatible = "operating-points-v2";
> +
> +                opp-200000000 {
> +                    opp-hz = /bits/ 64 <200000000>;
> +                    required-opps = <&rpmhpd_opp_low_svs>;
> +                };
> +
> +                opp-300000000 {
> +                    opp-hz = /bits/ 64 <300000000>;
> +                    required-opps = <&rpmhpd_opp_svs>;
> +                };
> +
> +                opp-345000000 {
> +                    opp-hz = /bits/ 64 <345000000>;
> +                    required-opps = <&rpmhpd_opp_svs_l1>;
> +                };
> +
> +                opp-460000000 {
> +                    opp-hz = /bits/ 64 <460000000>;
> +                    required-opps = <&rpmhpd_opp_nom>;
> +                };
> +            };
> +        };
> +
> +        dsi0: dsi@ae94000 {
> +            compatible = "qcom,mdss-dsi-ctrl";
> +            reg = <0x0ae94000 0x400>;
> +            reg-names = "dsi_ctrl";
> +
> +            interrupt-parent = <&mdss>;
> +            interrupts = <4>;
> +
> +            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
> +                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
> +                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
> +                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
> +                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
> +                     <&gcc GCC_DISP_HF_AXI_CLK>;
> +            clock-names = "byte",
> +                      "byte_intf",
> +                      "pixel",
> +                      "core",
> +                      "iface",
> +                      "bus";
> +
> +            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
> +                          <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
> +            assigned-clock-parents = <&dsi0_phy 0>,
> +                                 <&dsi0_phy 1>;
> +
> +            operating-points-v2 = <&dsi_opp_table>;
> +            power-domains = <&rpmhpd SM8350_MMCX>;
> +
> +            phys = <&dsi0_phy>;
> +            phy-names = "dsi";
> +
> +            ports {
> +             #address-cells = <1>;
> +                #size-cells = <0>;
> +
> +                port@0 {
> +                    reg = <0>;
> +                    dsi0_in: endpoint {
> +                        remote-endpoint = <&dpu_intf1_out>;
> +                    };
> +                };
> +
> +                port@1 {
> +                    reg = <1>;
> +                    dsi0_out: endpoint {
> +                    };
> +                };
> +            };
> +        };
> +
> +        dsi0_phy: phy@ae94400 {

I assume the phy has its own example somewhere else and its not really 
relevant to this binding. So drop.

> +            compatible = "qcom,dsi-phy-5nm-8350";
> +            reg = <0x0ae94400 0x200>,
> +                  <0x0ae94600 0x280>,
> +                  <0x0ae94900 0x260>;
> +            reg-names = "dsi_phy",
> +                        "dsi_phy_lane",
> +                        "dsi_pll";
> +
> +            #clock-cells = <1>;
> +            #phy-cells = <0>;
> +
> +            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
> +                     <&rpmhcc RPMH_CXO_CLK>;
> +            clock-names = "iface", "ref";
> +
> +            vdds-supply = <&vreg_l5b_0p88>;
> +        };
> +    };
> +...
> -- 
> 2.34.1
> 
>