public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Eric DeVolder <eric.devolder@oracle.com>
To: linux-kernel@vger.kernel.org, x86@kernel.org,
	kexec@lists.infradead.org, ebiederm@xmission.com,
	dyoung@redhat.com, bhe@redhat.com, vgoyal@redhat.com
Cc: tglx@linutronix.de, mingo@redhat.com, bp@alien8.de,
	dave.hansen@linux.intel.com, hpa@zytor.com,
	nramas@linux.microsoft.com, thomas.lendacky@amd.com,
	robh@kernel.org, efault@gmx.de, rppt@kernel.org,
	david@redhat.com, sourabhjain@linux.ibm.com,
	konrad.wilk@oracle.com, boris.ostrovsky@oracle.com,
	eric.devolder@oracle.com
Subject: [PATCH v14 7/7] x86/crash: add x86 crash hotplug support
Date: Wed, 16 Nov 2022 16:46:43 -0500	[thread overview]
Message-ID: <20221116214643.6384-8-eric.devolder@oracle.com> (raw)
In-Reply-To: <20221116214643.6384-1-eric.devolder@oracle.com>

When CPU or memory is hot un/plugged, the crash elfcorehdr, which
describes the CPUs and memory in the system, must also be updated.

A new elfcorehdr is generated from the available CPUs and memory
into a buffer, and then installed over the top of the existing
elfcorehdr. The segment containing the elfcorehdr is identified
at run time in crash_core:handle_hotplug_event(), which works for
both the kexec_load() and kexec_file_load() syscalls.

In the patch 'kexec: exclude elfcorehdr from the segment digest'
the need to update purgatory due to the change in elfcorehdr was
eliminated.  As a result, no changes to purgatory or boot_params
(as the elfcorehdr= kernel command line parameter pointer
remains unchanged and correct) are needed, just elfcorehdr.

To accommodate a growing number of resources via hotplug, the
elfcorehdr segment must be sufficiently large enough to accommodate
changes, see the CRASH_MAX_MEMORY_RANGES description.

Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
---
 arch/x86/Kconfig             |   9 +++
 arch/x86/include/asm/kexec.h |  15 +++++
 arch/x86/kernel/crash.c      | 106 ++++++++++++++++++++++++++++++++++-
 3 files changed, 127 insertions(+), 3 deletions(-)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 67745ceab0db..fc7b6457a0b4 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -2072,6 +2072,15 @@ config CRASH_DUMP
 	  (CONFIG_RELOCATABLE=y).
 	  For more details see Documentation/admin-guide/kdump/kdump.rst
 
+config CRASH_HOTPLUG
+	bool "kernel updates of crash elfcorehdr"
+	default n
+	depends on CRASH_DUMP && (HOTPLUG_CPU || MEMORY_HOTPLUG)
+	help
+	  Enable the kernel to directly update the crash elfcorehdr (which
+	  contains the list of CPUs and memory regions to be dumped upon
+	  a crash) in response to hot plug/unplug of CPUs or memory.
+
 config KEXEC_JUMP
 	bool "kexec jump"
 	depends on KEXEC && HIBERNATION
diff --git a/arch/x86/include/asm/kexec.h b/arch/x86/include/asm/kexec.h
index a3760ca796aa..1bc852ce347d 100644
--- a/arch/x86/include/asm/kexec.h
+++ b/arch/x86/include/asm/kexec.h
@@ -212,6 +212,21 @@ typedef void crash_vmclear_fn(void);
 extern crash_vmclear_fn __rcu *crash_vmclear_loaded_vmcss;
 extern void kdump_nmi_shootdown_cpus(void);
 
+#ifdef CONFIG_CRASH_HOTPLUG
+void arch_crash_handle_hotplug_event(struct kimage *image);
+#define arch_crash_handle_hotplug_event arch_crash_handle_hotplug_event
+
+#ifdef CONFIG_HOTPLUG_CPU
+static inline int crash_hotplug_cpu_support(void) { return 1; }
+#define crash_hotplug_cpu_support crash_hotplug_cpu_support
+#endif
+
+#ifdef CONFIG_MEMORY_HOTPLUG
+static inline int crash_hotplug_memory_support(void) { return 1; }
+#define crash_hotplug_memory_support crash_hotplug_memory_support
+#endif
+#endif
+
 #endif /* __ASSEMBLY__ */
 
 #endif /* _ASM_X86_KEXEC_H */
diff --git a/arch/x86/kernel/crash.c b/arch/x86/kernel/crash.c
index 9ceb93c176a6..d2238bcf8106 100644
--- a/arch/x86/kernel/crash.c
+++ b/arch/x86/kernel/crash.c
@@ -42,6 +42,21 @@
 #include <asm/crash.h>
 #include <asm/cmdline.h>
 
+/*
+ * For the kexec_file_load() syscall path, specify the maximum number of
+ * memory regions that the elfcorehdr buffer/segment can accommodate.
+ * These regions are obtained via walk_system_ram_res(); eg. the
+ * 'System RAM' entries in /proc/iomem.
+ * This value is combined with NR_CPUS_DEFAULT and multiplied by
+ * sizeof(Elf64_Phdr) to determine the final elfcorehdr memory buffer/
+ * segment size.
+ * The value 8192, for example, covers a (sparsely populated) 1TiB system
+ * consisting of 128MiB memblocks, while resulting in an elfcorehdr
+ * memory buffer/segment size under 1MiB. This represents a sane choice
+ * to accommodate both baremetal and virtual machine configurations.
+ */
+#define CRASH_MAX_MEMORY_RANGES 8192
+
 /* Used while preparing memory map entries for second kernel */
 struct crash_memmap_data {
 	struct boot_params *params;
@@ -394,10 +409,30 @@ int crash_load_segments(struct kimage *image)
 	if (ret)
 		return ret;
 
-	image->elf_headers = kbuf.buffer;
-	image->elf_headers_sz = kbuf.bufsz;
+	image->elf_headers	= kbuf.buffer;
+	image->elf_headers_sz	= kbuf.bufsz;
+	kbuf.memsz		= kbuf.bufsz;
+
+#ifdef CONFIG_CRASH_HOTPLUG
+	/* Ensure elfcorehdr segment large enough for hotplug changes */
+	unsigned long pnum = 2; /* VMCOREINFO and kernel_map */
+
+	if (IS_ENABLED(CONFIG_HOTPLUG_CPU))
+		pnum += CONFIG_NR_CPUS_DEFAULT;
+	if (IS_ENABLED(CONFIG_MEMORY_HOTPLUG))
+		pnum += CRASH_MAX_MEMORY_RANGES;
+	if (pnum < (unsigned long)PN_XNUM) {
+		kbuf.memsz = pnum * sizeof(Elf64_Phdr);
+		kbuf.memsz += sizeof(Elf64_Ehdr);
+		image->elfcorehdr_index = image->nr_segments;
+		image->elfcorehdr_index_valid = true;
+		/* Mark as usable to crash kernel, else crash kernel fails on boot */
+		image->elf_headers_sz = kbuf.memsz;
+	} else {
+		pr_err("number of Phdrs %lu exceeds max\n", pnum);
+	}
+#endif
 
-	kbuf.memsz = kbuf.bufsz;
 	kbuf.buf_align = ELF_CORE_HEADER_ALIGN;
 	kbuf.mem = KEXEC_BUF_MEM_UNKNOWN;
 	ret = kexec_add_buffer(&kbuf);
@@ -412,3 +447,68 @@ int crash_load_segments(struct kimage *image)
 	return ret;
 }
 #endif /* CONFIG_KEXEC_FILE */
+
+#ifdef CONFIG_CRASH_HOTPLUG
+
+#undef pr_fmt
+#define pr_fmt(fmt) "crash hp: " fmt
+
+/**
+ * arch_crash_handle_hotplug_event() - Handle hotplug elfcorehdr changes
+ * @image: the active struct kimage
+ *
+ * To accurately reflect hot un/plug changes, the new elfcorehdr
+ * is prepared in a kernel buffer, and then it is written on top
+ * of the existing/old elfcorehdr.
+ */
+void arch_crash_handle_hotplug_event(struct kimage *image)
+{
+	unsigned long mem, memsz;
+	unsigned long elfsz = 0;
+	void *elfbuf = NULL;
+	void *ptr;
+
+	/*
+	 * Create the new elfcorehdr reflecting the changes to CPU and/or
+	 * memory resources.
+	 */
+	if (prepare_elf_headers(image, &elfbuf, &elfsz)) {
+		pr_err("unable to prepare elfcore headers");
+		goto out;
+	}
+
+	/*
+	 * Obtain address and size of the elfcorehdr segment, and
+	 * check it against the new elfcorehdr buffer.
+	 */
+	mem = image->segment[image->elfcorehdr_index].mem;
+	memsz = image->segment[image->elfcorehdr_index].memsz;
+	if (elfsz > memsz) {
+		pr_err("update elfcorehdr elfsz %lu > memsz %lu",
+			elfsz, memsz);
+		goto out;
+	}
+
+	/*
+	 * Copy new elfcorehdr over the old elfcorehdr at destination.
+	 */
+	ptr = arch_map_crash_pages(mem, memsz);
+	if (ptr) {
+		/*
+		 * Temporarily invalidate the crash image while the
+		 * elfcorehdr is updated.
+		 */
+		xchg(&kexec_crash_image, NULL);
+		memcpy_flushcache(ptr, elfbuf, elfsz);
+		xchg(&kexec_crash_image, image);
+		arch_unmap_crash_pages(ptr);
+		pr_debug("updated elfcorehdr\n");
+	} else {
+		pr_err("updating elfcorehdr failed\n");
+	}
+
+out:
+	if (elfbuf)
+		vfree(elfbuf);
+}
+#endif
-- 
2.31.1


  parent reply	other threads:[~2022-11-16 21:48 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-11-16 21:46 [PATCH v14 0/7] crash: Kernel handling of CPU and memory hot un/plug Eric DeVolder
2022-11-16 21:46 ` [PATCH v14 1/7] crash: move crash_prepare_elf64_headers() Eric DeVolder
2022-11-16 21:46 ` [PATCH v14 2/7] crash: prototype change for crash_prepare_elf64_headers() Eric DeVolder
2022-11-16 21:46 ` [PATCH v14 3/7] crash: add generic infrastructure for crash hotplug support Eric DeVolder
2022-11-25  3:26   ` Baoquan He
2022-11-28 15:46     ` Eric DeVolder
2022-11-29  0:43       ` Baoquan He
2022-12-07 10:00     ` Borislav Petkov
2022-12-07 12:36       ` Baoquan He
2022-12-07 12:42         ` Borislav Petkov
2022-12-07 13:57           ` Baoquan He
2022-12-07 15:56             ` Borislav Petkov
2022-12-08  4:03               ` Baoquan He
2022-12-07 10:15   ` Borislav Petkov
2022-12-08 19:04     ` Eric DeVolder
2022-11-16 21:46 ` [PATCH v14 4/7] kexec: exclude elfcorehdr from the segment digest Eric DeVolder
2022-11-16 21:46 ` [PATCH v14 5/7] kexec: exclude hot remove cpu from elfcorehdr notes Eric DeVolder
2022-11-16 21:46 ` [PATCH v14 6/7] crash: memory and cpu hotplug sysfs attributes Eric DeVolder
2022-11-16 21:46 ` Eric DeVolder [this message]
2022-12-07 10:19   ` [PATCH v14 7/7] x86/crash: add x86 crash hotplug support Borislav Petkov
2022-12-08 20:34     ` Eric DeVolder
2022-11-23 15:31 ` [PATCH v14 0/7] crash: Kernel handling of CPU and memory hot un/plug Sourabh Jain

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221116214643.6384-8-eric.devolder@oracle.com \
    --to=eric.devolder@oracle.com \
    --cc=bhe@redhat.com \
    --cc=boris.ostrovsky@oracle.com \
    --cc=bp@alien8.de \
    --cc=dave.hansen@linux.intel.com \
    --cc=david@redhat.com \
    --cc=dyoung@redhat.com \
    --cc=ebiederm@xmission.com \
    --cc=efault@gmx.de \
    --cc=hpa@zytor.com \
    --cc=kexec@lists.infradead.org \
    --cc=konrad.wilk@oracle.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@redhat.com \
    --cc=nramas@linux.microsoft.com \
    --cc=robh@kernel.org \
    --cc=rppt@kernel.org \
    --cc=sourabhjain@linux.ibm.com \
    --cc=tglx@linutronix.de \
    --cc=thomas.lendacky@amd.com \
    --cc=vgoyal@redhat.com \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox