public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Hal Feng <hal.feng@starfivetech.com>
To: <linux-riscv@lists.infradead.org>, <devicetree@vger.kernel.org>,
	<linux-clk@vger.kernel.org>
Cc: Conor Dooley <conor@kernel.org>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	"Rob Herring" <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Stephen Boyd <sboyd@kernel.org>,
	"Michael Turquette" <mturquette@baylibre.com>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Emil Renner Berthing <emil.renner.berthing@canonical.com>,
	Hal Feng <hal.feng@starfivetech.com>,
	<linux-kernel@vger.kernel.org>
Subject: [PATCH v2 12/14] clk: starfive: Add StarFive JH7110 always-on clock driver
Date: Fri, 18 Nov 2022 09:06:25 +0800	[thread overview]
Message-ID: <20221118010627.70576-13-hal.feng@starfivetech.com> (raw)
In-Reply-To: <20221118010627.70576-1-hal.feng@starfivetech.com>

From: Emil Renner Berthing <kernel@esmil.dk>

Add driver for the StarFive JH7110 always-on clock controller
and register an auxiliary device for always-on reset controller
which is named as "reset-aon".

Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Co-developed-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
---
 drivers/clk/starfive/Kconfig                  |  10 ++
 drivers/clk/starfive/Makefile                 |   1 +
 .../clk/starfive/clk-starfive-jh7110-aon.c    | 165 ++++++++++++++++++
 3 files changed, 176 insertions(+)
 create mode 100644 drivers/clk/starfive/clk-starfive-jh7110-aon.c

diff --git a/drivers/clk/starfive/Kconfig b/drivers/clk/starfive/Kconfig
index 7a6ff6614c74..baa602d384b7 100644
--- a/drivers/clk/starfive/Kconfig
+++ b/drivers/clk/starfive/Kconfig
@@ -30,3 +30,13 @@ config CLK_STARFIVE_JH7110_SYS
 	help
 	  Say yes here to support the system clock controller on the
 	  StarFive JH7110 SoC.
+
+config CLK_STARFIVE_JH7110_AON
+	tristate "StarFive JH7110 always-on clock support"
+	depends on CLK_STARFIVE_JH7110_SYS
+	select AUXILIARY_BUS
+	select CLK_STARFIVE_JH71X0
+	default CLK_STARFIVE_JH7110_SYS
+	help
+	  Say yes here to support the always-on clock controller on the
+	  StarFive JH7110 SoC.
diff --git a/drivers/clk/starfive/Makefile b/drivers/clk/starfive/Makefile
index 5ca4e887fb9c..f3df7d957b1e 100644
--- a/drivers/clk/starfive/Makefile
+++ b/drivers/clk/starfive/Makefile
@@ -5,3 +5,4 @@ obj-$(CONFIG_CLK_STARFIVE_JH7100)	+= clk-starfive-jh7100.o
 obj-$(CONFIG_CLK_STARFIVE_JH7100_AUDIO)	+= clk-starfive-jh7100-audio.o
 
 obj-$(CONFIG_CLK_STARFIVE_JH7110_SYS)	+= clk-starfive-jh7110-sys.o
+obj-$(CONFIG_CLK_STARFIVE_JH7110_AON)	+= clk-starfive-jh7110-aon.o
diff --git a/drivers/clk/starfive/clk-starfive-jh7110-aon.c b/drivers/clk/starfive/clk-starfive-jh7110-aon.c
new file mode 100644
index 000000000000..643728f9904a
--- /dev/null
+++ b/drivers/clk/starfive/clk-starfive-jh7110-aon.c
@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * StarFive JH7110 Always-On Clock Driver
+ *
+ * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk>
+ * Copyright (C) 2022 StarFive Technology Co., Ltd.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+#include <dt-bindings/clock/starfive-jh7110.h>
+
+#include "clk-starfive-jh71x0.h"
+
+/* external clocks */
+#define JH7110_AONCLK_OSC		(JH7110_AONCLK_END + 0)
+#define JH7110_AONCLK_RTC		(JH7110_AONCLK_END + 1)
+#define JH7110_AONCLK_GMAC0_RMII_REFIN	(JH7110_AONCLK_END + 2)
+#define JH7110_AONCLK_GMAC0_RGMII_RXIN	(JH7110_AONCLK_END + 3)
+#define JH7110_AONCLK_STG_AXIAHB	(JH7110_AONCLK_END + 4)
+#define JH7110_AONCLK_APB_BUS_FUNC	(JH7110_AONCLK_END + 5)
+#define JH7110_AONCLK_GMAC0_GTXCLK	(JH7110_AONCLK_END + 6)
+
+static const struct jh71x0_clk_data jh7110_aonclk_data[] = {
+	/* source */
+	JH71X0__DIV(JH7110_AONCLK_OSC_DIV4, "osc_div4", 4,
+		    JH7110_AONCLK_OSC),
+	JH71X0__MUX(JH7110_AONCLK_APB_FUNC, "aon_apb_func", 2,
+		    JH7110_AONCLK_OSC_DIV4,
+		    JH7110_AONCLK_OSC),
+	/* gmac0 */
+	JH71X0_GATE(JH7110_AONCLK_GMAC0_AHB, "gmac0_ahb", 0,
+		    JH7110_AONCLK_STG_AXIAHB),
+	JH71X0_GATE(JH7110_AONCLK_GMAC0_AXI, "gmac0_axi", 0,
+		    JH7110_AONCLK_STG_AXIAHB),
+	JH71X0__DIV(JH7110_AONCLK_GMAC0_RMII_RTX, "gmac0_rmii_rtx", 30,
+		    JH7110_AONCLK_GMAC0_RMII_REFIN),
+	JH71X0_GMUX(JH7110_AONCLK_GMAC0_TX, "gmac0_tx", 0, 2,
+		    JH7110_AONCLK_GMAC0_GTXCLK,
+		    JH7110_AONCLK_GMAC0_RMII_RTX),
+	JH71X0__INV(JH7110_AONCLK_GMAC0_TX_INV, "gmac0_tx_inv",
+		    JH7110_AONCLK_GMAC0_TX),
+	JH71X0__MUX(JH7110_AONCLK_GMAC0_RX, "gmac0_rx", 2,
+		    JH7110_AONCLK_GMAC0_RGMII_RXIN,
+		    JH7110_AONCLK_GMAC0_RMII_RTX),
+	JH71X0__INV(JH7110_AONCLK_GMAC0_RX_INV, "gmac0_rx_inv",
+		    JH7110_AONCLK_GMAC0_RX),
+	/* otpc */
+	JH71X0_GATE(JH7110_AONCLK_OTPC_APB, "otpc_apb", CLK_IGNORE_UNUSED,
+		    JH7110_AONCLK_APB_BUS_FUNC),
+	/* rtc */
+	JH71X0_GATE(JH7110_AONCLK_RTC_APB, "rtc_apb", CLK_IGNORE_UNUSED,
+		    JH7110_AONCLK_APB_BUS_FUNC),
+	JH71X0__DIV(JH7110_AONCLK_RTC_INTERNAL, "rtc_internal", 1022,
+		    JH7110_AONCLK_OSC),
+	JH71X0__MUX(JH7110_AONCLK_RTC_32K, "rtc_32k", 2,
+		    JH7110_AONCLK_RTC,
+		    JH7110_AONCLK_RTC_INTERNAL),
+	JH71X0_GATE(JH7110_AONCLK_RTC_CAL, "rtc_cal", 0,
+		    JH7110_AONCLK_OSC),
+};
+
+static struct clk_hw *jh7110_aonclk_get(struct of_phandle_args *clkspec, void *data)
+{
+	struct jh71x0_clk_priv *priv = data;
+	unsigned int idx = clkspec->args[0];
+
+	if (idx < JH7110_AONCLK_END)
+		return &priv->reg[idx].hw;
+
+	return ERR_PTR(-EINVAL);
+}
+
+static int jh7110_aoncrg_probe(struct platform_device *pdev)
+{
+	struct jh71x0_clk_priv *priv;
+	unsigned int idx;
+	int ret;
+
+	priv = devm_kzalloc(&pdev->dev,
+			    struct_size(priv, reg, JH7110_AONCLK_END),
+			    GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	spin_lock_init(&priv->rmw_lock);
+	priv->dev = &pdev->dev;
+	priv->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	dev_set_drvdata(priv->dev, priv->base);
+
+	for (idx = 0; idx < JH7110_AONCLK_END; idx++) {
+		u32 max = jh7110_aonclk_data[idx].max;
+		struct clk_parent_data parents[4] = {};
+		struct clk_init_data init = {
+			.name = jh7110_aonclk_data[idx].name,
+			.ops = starfive_jh71x0_clk_ops(max),
+			.parent_data = parents,
+			.num_parents = ((max & JH71X0_CLK_MUX_MASK)
+					>> JH71X0_CLK_MUX_SHIFT) + 1,
+			.flags = jh7110_aonclk_data[idx].flags,
+		};
+		struct jh71x0_clk *clk = &priv->reg[idx];
+		unsigned int i;
+
+		for (i = 0; i < init.num_parents; i++) {
+			unsigned int pidx = jh7110_aonclk_data[idx].parents[i];
+
+			if (pidx < JH7110_AONCLK_END)
+				parents[i].hw = &priv->reg[pidx].hw;
+			else if (pidx == JH7110_AONCLK_OSC)
+				parents[i].fw_name = "osc";
+			else if (pidx == JH7110_AONCLK_RTC)
+				parents[i].fw_name = "clk_rtc";
+			else if (pidx == JH7110_AONCLK_GMAC0_RMII_REFIN)
+				parents[i].fw_name = "gmac0_rmii_refin";
+			else if (pidx == JH7110_AONCLK_GMAC0_RGMII_RXIN)
+				parents[i].fw_name = "gmac0_rgmii_rxin";
+			else if (pidx == JH7110_AONCLK_STG_AXIAHB)
+				parents[i].fw_name = "stg_axiahb";
+			else if (pidx == JH7110_AONCLK_APB_BUS_FUNC)
+				parents[i].fw_name = "apb_bus_func";
+			else if (pidx == JH7110_AONCLK_GMAC0_GTXCLK)
+				parents[i].fw_name = "gmac0_gtxclk";
+		}
+
+		clk->hw.init = &init;
+		clk->idx = idx;
+		clk->max_div = max & JH71X0_CLK_DIV_MASK;
+
+		ret = devm_clk_hw_register(&pdev->dev, &clk->hw);
+		if (ret)
+			return ret;
+	}
+
+	ret = devm_of_clk_add_hw_provider(&pdev->dev, jh7110_aonclk_get, priv);
+	if (ret)
+		return ret;
+
+	return jh7110_reset_controller_register(priv, "reset-aon", 1);
+}
+
+static const struct of_device_id jh7110_aoncrg_match[] = {
+	{ .compatible = "starfive,jh7110-aoncrg" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, jh7110_aoncrg_match);
+
+static struct platform_driver jh7110_aoncrg_driver = {
+	.probe = jh7110_aoncrg_probe,
+	.driver = {
+		.name = "clk-starfive-jh7110-aon",
+		.of_match_table = jh7110_aoncrg_match,
+	},
+};
+module_platform_driver(jh7110_aoncrg_driver);
+
+MODULE_AUTHOR("Emil Renner Berthing");
+MODULE_DESCRIPTION("StarFive JH7110 always-on clock driver");
+MODULE_LICENSE("GPL v2");
-- 
2.38.1


  parent reply	other threads:[~2022-11-18  1:44 UTC|newest]

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-11-18  1:06 [PATCH v2 00/14] Basic clock and reset support for StarFive JH7110 RISC-V SoC Hal Feng
2022-11-18  1:06 ` [PATCH v2 01/14] clk: starfive: Factor out common JH7100 and JH7110 code Hal Feng
2022-11-18 16:22   ` Emil Renner Berthing
2022-11-21  6:25     ` Hal Feng
2022-11-18  1:06 ` [PATCH v2 02/14] clk: starfive: Rename "jh7100" to "jh71x0" for the common code Hal Feng
2022-11-18 16:26   ` Emil Renner Berthing
2022-11-21  7:16     ` Hal Feng
2022-11-21 11:32       ` Emil Renner Berthing
2022-11-21 13:13         ` Hal Feng
2022-11-18  1:06 ` [PATCH v2 03/14] reset: Create subdirectory for StarFive drivers Hal Feng
2022-11-18 16:29   ` Emil Renner Berthing
2022-11-18  1:06 ` [PATCH v2 04/14] reset: starfive: Factor out common JH71X0 reset code Hal Feng
2022-11-18 16:39   ` Emil Renner Berthing
2022-11-21  9:23     ` Hal Feng
2022-11-21 11:26       ` Emil Renner Berthing
2022-11-18  1:06 ` [PATCH v2 05/14] reset: starfive: Rename "jh7100" to "jh71x0" for the common code Hal Feng
2022-11-18  1:06 ` [PATCH v2 06/14] reset: starfive: jh71x0: Use 32bit I/O on 32bit registers Hal Feng
2022-11-18  1:06 ` [PATCH v2 07/14] dt-bindings: clock: Add StarFive JH7110 system and always-on clock definitions Hal Feng
2022-11-21  8:45   ` Krzysztof Kozlowski
2022-11-22  1:02     ` Hal Feng
2022-11-22  7:41       ` Krzysztof Kozlowski
2022-11-22  8:04         ` Hal Feng
2022-11-23  9:34           ` Krzysztof Kozlowski
2022-11-18  1:06 ` [PATCH v2 08/14] dt-bindings: reset: Add StarFive JH7110 system and always-on reset definitions Hal Feng
2022-11-18 16:47   ` Emil Renner Berthing
2022-11-22  1:20     ` Hal Feng
2022-11-21  8:45   ` Krzysztof Kozlowski
2022-11-21  8:50   ` Krzysztof Kozlowski
2022-11-22  1:26     ` Hal Feng
2022-11-18  1:06 ` [PATCH v2 09/14] dt-bindings: clock: Add StarFive JH7110 system clock and reset generator Hal Feng
2022-11-18 16:50   ` Emil Renner Berthing
2022-11-21  8:47     ` Krzysztof Kozlowski
2022-11-22  1:45     ` Hal Feng
2022-11-21  8:47   ` Krzysztof Kozlowski
2022-11-25  6:41     ` Hal Feng
2022-11-30  9:47       ` Hal Feng
2022-11-30 11:48         ` Krzysztof Kozlowski
2022-11-30 15:12           ` Hal Feng
2022-11-30 15:19             ` Krzysztof Kozlowski
2022-11-30 18:05               ` Hal Feng
2022-12-01 10:21                 ` Krzysztof Kozlowski
2022-12-02  2:06                   ` Hal Feng
2022-11-18  1:06 ` [PATCH v2 10/14] dt-bindings: clock: Add StarFive JH7110 always-on " Hal Feng
2022-11-21  8:49   ` Krzysztof Kozlowski
2022-11-21 11:38     ` Emil Renner Berthing
2022-11-21 13:24       ` Krzysztof Kozlowski
2022-11-18  1:06 ` [PATCH v2 11/14] clk: starfive: Add StarFive JH7110 system clock driver Hal Feng
2022-11-18 17:03   ` Emil Renner Berthing
2022-11-25  2:33     ` Hal Feng
2022-11-18  1:06 ` Hal Feng [this message]
2022-11-18  1:06 ` [PATCH v2 13/14] reset: starfive: Add StarFive JH7110 reset driver Hal Feng
2022-11-18 17:14   ` Emil Renner Berthing
2022-11-22  5:55     ` Hal Feng
2022-11-18  1:06 ` [PATCH v2 14/14] clk: starfive: jh71x0: Don't register aux devices if JH7110 reset is disabled Hal Feng
2022-11-18 17:18   ` Emil Renner Berthing
2022-11-22  6:12     ` Hal Feng

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221118010627.70576-13-hal.feng@starfivetech.com \
    --to=hal.feng@starfivetech.com \
    --cc=conor@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=emil.renner.berthing@canonical.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=mturquette@baylibre.com \
    --cc=p.zabel@pengutronix.de \
    --cc=palmer@dabbelt.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox