public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Hal Feng <hal.feng@starfivetech.com>
To: <linux-riscv@lists.infradead.org>, <devicetree@vger.kernel.org>
Cc: Conor Dooley <conor@kernel.org>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	"Rob Herring" <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Paul Walmsley <paul.walmsley@sifive.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Ben Dooks <ben.dooks@sifive.com>,
	Thomas Gleixner <tglx@linutronix.de>,
	Marc Zyngier <maz@kernel.org>, Stephen Boyd <sboyd@kernel.org>,
	Michael Turquette <mturquette@baylibre.com>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	"Linus Walleij" <linus.walleij@linaro.org>,
	Emil Renner Berthing <emil.renner.berthing@canonical.com>,
	Hal Feng <hal.feng@starfivetech.com>,
	<linux-kernel@vger.kernel.org>
Subject: [PATCH v2 6/8] riscv: dts: starfive: Add initial StarFive JH7110 device tree
Date: Fri, 18 Nov 2022 09:17:12 +0800	[thread overview]
Message-ID: <20221118011714.70877-7-hal.feng@starfivetech.com> (raw)
In-Reply-To: <20221118011714.70877-1-hal.feng@starfivetech.com>

From: Emil Renner Berthing <kernel@esmil.dk>

Add initial device tree for the JH7110 RISC-V SoC by StarFive
Technology Ltd.

Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Co-developed-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Co-developed-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
---
 arch/riscv/boot/dts/starfive/jh7110.dtsi | 437 +++++++++++++++++++++++
 1 file changed, 437 insertions(+)
 create mode 100644 arch/riscv/boot/dts/starfive/jh7110.dtsi

diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
new file mode 100644
index 000000000000..c22e8f1d2640
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -0,0 +1,437 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2022 StarFive Technology Co., Ltd.
+ * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk>
+ */
+
+/dts-v1/;
+#include <dt-bindings/clock/starfive-jh7110.h>
+#include <dt-bindings/reset/starfive-jh7110.h>
+
+/ {
+	compatible = "starfive,jh7110";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		S76_0: cpu@0 {
+			compatible = "sifive,u74-mc", "riscv";
+			reg = <0>;
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <8192>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <40>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <64>;
+			i-cache-size = <16384>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <40>;
+			mmu-type = "riscv,sv39";
+			next-level-cache = <&ccache>;
+			riscv,isa = "rv64imac";
+			tlb-split;
+			status = "disabled";
+
+			cpu0_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		U74_1: cpu@1 {
+			compatible = "sifive,u74-mc", "riscv";
+			reg = <1>;
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <40>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <64>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <40>;
+			mmu-type = "riscv,sv39";
+			next-level-cache = <&ccache>;
+			riscv,isa = "rv64imafdc";
+			tlb-split;
+
+			cpu1_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		U74_2: cpu@2 {
+			compatible = "sifive,u74-mc", "riscv";
+			reg = <2>;
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <40>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <64>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <40>;
+			mmu-type = "riscv,sv39";
+			next-level-cache = <&ccache>;
+			riscv,isa = "rv64imafdc";
+			tlb-split;
+
+			cpu2_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		U74_3: cpu@3 {
+			compatible = "sifive,u74-mc", "riscv";
+			reg = <3>;
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <40>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <64>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <40>;
+			mmu-type = "riscv,sv39";
+			next-level-cache = <&ccache>;
+			riscv,isa = "rv64imafdc";
+			tlb-split;
+
+			cpu3_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		U74_4: cpu@4 {
+			compatible = "sifive,u74-mc", "riscv";
+			reg = <4>;
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <40>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <64>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <40>;
+			mmu-type = "riscv,sv39";
+			next-level-cache = <&ccache>;
+			riscv,isa = "rv64imafdc";
+			tlb-split;
+
+			cpu4_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&S76_0>;
+				};
+
+				core1 {
+					cpu = <&U74_1>;
+				};
+
+				core2 {
+					cpu = <&U74_2>;
+				};
+
+				core3 {
+					cpu = <&U74_3>;
+				};
+
+				core4 {
+					cpu = <&U74_4>;
+				};
+			};
+		};
+	};
+
+	osc: osc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	clk_rtc: clk_rtc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	gmac0_rmii_refin: gmac0_rmii_refin {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	gmac0_rgmii_rxin: gmac0_rgmii_rxin {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	gmac1_rmii_refin: gmac1_rmii_refin {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	gmac1_rgmii_rxin: gmac1_rgmii_rxin {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	i2stx_bclk_ext: i2stx_bclk_ext {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	i2stx_lrck_ext: i2stx_lrck_ext {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	i2srx_bclk_ext: i2srx_bclk_ext {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	i2srx_lrck_ext: i2srx_lrck_ext {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	tdm_ext: tdm_ext {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	mclk_ext: mclk_ext {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&plic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		clint: clint@2000000 {
+			compatible = "starfive,jh7110-clint", "sifive,clint0";
+			reg = <0x0 0x2000000 0x0 0x10000>;
+			interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
+					      <&cpu1_intc 3>, <&cpu1_intc 7>,
+					      <&cpu2_intc 3>, <&cpu2_intc 7>,
+					      <&cpu3_intc 3>, <&cpu3_intc 7>,
+					      <&cpu4_intc 3>, <&cpu4_intc 7>;
+		};
+
+		plic: plic@c000000 {
+			compatible = "starfive,jh7110-plic", "sifive,plic-1.0.0";
+			reg = <0x0 0xc000000 0x0 0x4000000>;
+			interrupts-extended = <&cpu0_intc 11>,
+					      <&cpu1_intc 11>, <&cpu1_intc 9>,
+					      <&cpu2_intc 11>, <&cpu2_intc 9>,
+					      <&cpu3_intc 11>, <&cpu3_intc 9>,
+					      <&cpu4_intc 11>, <&cpu4_intc 9>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			riscv,ndev = <136>;
+		};
+
+		ccache: cache-controller@2010000 {
+			compatible = "starfive,jh7110-ccache", "cache";
+			reg = <0x0 0x2010000 0x0 0x4000>;
+			interrupts = <1>, <3>, <4>, <2>;
+			cache-block-size = <64>;
+			cache-level = <2>;
+			cache-sets = <2048>;
+			cache-size = <2097152>;
+			cache-unified;
+		};
+
+		syscrg: clock-controller@13020000 {
+			compatible = "starfive,jh7110-syscrg";
+			reg = <0x0 0x13020000 0x0 0x10000>;
+			clocks = <&osc>, <&gmac1_rmii_refin>,
+				 <&gmac1_rgmii_rxin>,
+				 <&i2stx_bclk_ext>, <&i2stx_lrck_ext>,
+				 <&i2srx_bclk_ext>, <&i2srx_lrck_ext>,
+				 <&tdm_ext>, <&mclk_ext>;
+			clock-names = "osc", "gmac1_rmii_refin",
+				      "gmac1_rgmii_rxin",
+				      "i2stx_bclk_ext", "i2stx_lrck_ext",
+				      "i2srx_bclk_ext", "i2srx_lrck_ext",
+				      "tdm_ext", "mclk_ext";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		aoncrg: clock-controller@17000000 {
+			compatible = "starfive,jh7110-aoncrg";
+			reg = <0x0 0x17000000 0x0 0x10000>;
+			clocks = <&osc>, <&clk_rtc>,
+				 <&gmac0_rmii_refin>, <&gmac0_rgmii_rxin>,
+				 <&syscrg JH7110_SYSCLK_STG_AXIAHB>,
+				 <&syscrg JH7110_SYSCLK_APB_BUS_FUNC>,
+				 <&syscrg JH7110_SYSCLK_GMAC0_GTXCLK>;
+			clock-names = "osc", "clk_rtc", "gmac0_rmii_refin",
+				      "gmac0_rgmii_rxin", "stg_axiahb",
+				      "apb_bus_func", "gmac0_gtxclk";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		gpio: gpio@13040000 {
+			compatible = "starfive,jh7110-sys-pinctrl";
+			reg = <0x0 0x13040000 0x0 0x10000>;
+			reg-names = "control";
+			clocks = <&syscrg JH7110_SYSCLK_IOMUX>;
+			resets = <&syscrg JH7110_SYSRST_IOMUX>;
+			interrupts = <86>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpioa: gpio@17020000 {
+			compatible = "starfive,jh7110-aon-pinctrl";
+			reg = <0x0 0x17020000 0x0 0x10000>;
+			reg-names = "control";
+			resets = <&aoncrg JH7110_AONRST_AON_IOMUX>;
+			interrupts = <85>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		uart0: serial@10000000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x10000000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_UART0_CORE>,
+				 <&syscrg JH7110_SYSCLK_UART0_APB>;
+			clock-names = "baudclk", "apb_pclk";
+			resets = <&syscrg JH7110_SYSRST_UART0_APB>;
+			interrupts = <32>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			status = "disabled";
+		};
+
+		uart1: serial@10010000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x10010000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_UART1_CORE>,
+				 <&syscrg JH7110_SYSCLK_UART1_APB>;
+			clock-names = "baudclk", "apb_pclk";
+			resets = <&syscrg JH7110_SYSRST_UART1_APB>;
+			interrupts = <33>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			status = "disabled";
+		};
+
+		uart2: serial@10020000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x10020000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_UART2_CORE>,
+				 <&syscrg JH7110_SYSCLK_UART2_APB>;
+			clock-names = "baudclk", "apb_pclk";
+			resets = <&syscrg JH7110_SYSRST_UART2_APB>;
+			interrupts = <34>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			status = "disabled";
+		};
+
+		uart3: serial@12000000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x12000000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_UART3_CORE>,
+				 <&syscrg JH7110_SYSCLK_UART3_APB>;
+			clock-names = "baudclk", "apb_pclk";
+			resets = <&syscrg JH7110_SYSRST_UART3_APB>;
+			interrupts = <45>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			status = "disabled";
+		};
+
+		uart4: serial@12010000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x12010000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_UART4_CORE>,
+				 <&syscrg JH7110_SYSCLK_UART4_APB>;
+			clock-names = "baudclk", "apb_pclk";
+			resets = <&syscrg JH7110_SYSRST_UART4_APB>;
+			interrupts = <46>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			status = "disabled";
+		};
+
+		uart5: serial@12020000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x12020000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_UART5_CORE>,
+				 <&syscrg JH7110_SYSCLK_UART5_APB>;
+			clock-names = "baudclk", "apb_pclk";
+			resets = <&syscrg JH7110_SYSRST_UART5_APB>;
+			interrupts = <47>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			status = "disabled";
+		};
+	};
+};
-- 
2.38.1


  parent reply	other threads:[~2022-11-18  1:32 UTC|newest]

Thread overview: 53+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-11-18  1:17 [PATCH v2 0/8] Basic device tree support for StarFive JH7110 RISC-V SoC Hal Feng
2022-11-18  1:17 ` [PATCH v2 1/8] dt-bindings: riscv: Add StarFive JH7110 SoC and VisionFive2 board Hal Feng
2022-11-18 11:31   ` Conor Dooley
2022-11-18 13:13   ` Krzysztof Kozlowski
2022-11-18 17:28   ` Emil Renner Berthing
     [not found]   ` <202211190418.2AJ4ImtE072425@SH1-CSMTP-DB111.sundns.com>
2022-11-24  1:57     ` Hal Feng
     [not found]   ` <202211190418.2AJ4IQjc072382@SH1-CSMTP-DB111.sundns.com>
2022-11-24  5:56     ` Hal Feng
2022-11-24  9:20       ` Emil Renner Berthing
2022-11-24  9:50         ` Hal Feng
2022-11-18  1:17 ` [PATCH v2 2/8] dt-bindings: timer: Add StarFive JH7110 clint Hal Feng
2022-11-18 11:32   ` Conor Dooley
2022-11-18  1:17 ` [PATCH v2 3/8] dt-bindings: interrupt-controller: Add StarFive JH7110 plic Hal Feng
2022-11-18 11:32   ` Conor Dooley
2022-11-18  1:17 ` [PATCH v2 4/8] dt-bindings: sifive,ccache0: Support StarFive JH7110 SoC Hal Feng
2022-11-18 11:37   ` Conor Dooley
2022-11-18 11:39     ` Conor Dooley
2022-11-22  8:40       ` Hal Feng
2022-11-22  9:07         ` Conor Dooley
2022-11-22  9:09           ` Ben Dooks
2022-11-22  9:55           ` Hal Feng
2022-11-22 10:01             ` Conor Dooley
2022-11-22 10:16               ` Hal Feng
2022-11-22 10:35                 ` Emil Renner Berthing
2022-11-22 12:51                   ` Hal Feng
2022-11-23 22:26                   ` Rob Herring
2022-11-18  1:17 ` [PATCH v2 5/8] soc: sifive: ccache: Add StarFive JH7110 support Hal Feng
2022-11-18 11:45   ` Conor Dooley
2022-11-22  9:02     ` Hal Feng
2022-11-22  9:54       ` Emil Renner Berthing
2022-11-22 10:12         ` Conor Dooley
2022-11-18 17:32   ` Emil Renner Berthing
2022-11-22  9:17     ` Hal Feng
2022-11-18  1:17 ` Hal Feng [this message]
2022-11-18 12:01   ` [PATCH v2 6/8] riscv: dts: starfive: Add initial StarFive JH7110 device tree Conor Dooley
2022-11-18 17:39     ` Emil Renner Berthing
2022-11-23  7:11     ` Hal Feng
2022-11-18 17:41   ` Emil Renner Berthing
2022-11-23  7:20     ` Hal Feng
2022-11-18  1:17 ` [PATCH v2 7/8] riscv: dts: starfive: Add StarFive JH7110 VisionFive2 board " Hal Feng
2022-11-18 17:55   ` Emil Renner Berthing
2022-11-24  6:17     ` Hal Feng
2022-11-18  1:17 ` [PATCH v2 8/8] RISC-V: defconfig: Enable CONFIG_SERIAL_8250_DW Hal Feng
2022-11-18 12:04   ` Conor Dooley
2022-12-02 18:00   ` Palmer Dabbelt
2022-12-02 18:07     ` Conor Dooley
2022-12-02 18:13       ` Palmer Dabbelt
2022-12-02 18:18         ` Conor Dooley
2022-12-02 18:24           ` Palmer Dabbelt
2022-12-02 18:43   ` Palmer Dabbelt
2022-12-04  7:20     ` Hal Feng
2022-11-18  7:28 ` [PATCH v2 0/8] Basic device tree support for StarFive JH7110 RISC-V SoC Hal Feng
2022-12-02 19:00 ` patchwork-bot+linux-riscv
2022-12-02 19:04   ` Palmer Dabbelt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221118011714.70877-7-hal.feng@starfivetech.com \
    --to=hal.feng@starfivetech.com \
    --cc=aou@eecs.berkeley.edu \
    --cc=ben.dooks@sifive.com \
    --cc=conor@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=emil.renner.berthing@canonical.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=maz@kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=p.zabel@pengutronix.de \
    --cc=palmer@dabbelt.com \
    --cc=paul.walmsley@sifive.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox