From: richard.leitner@linux.dev
To: linux-kernel@vger.kernel.org
Cc: Richard Leitner <richard.leitner@skidata.com>,
Thierry Reding <thierry.reding@gmail.com>,
Sam Ravnborg <sam@ravnborg.org>, David Airlie <airlied@gmail.com>,
Daniel Vetter <daniel@ffwll.ch>,
dri-devel@lists.freedesktop.org
Subject: [PATCH 2/2] drm/panel: simple: Add InnoLux G070ACE-L01
Date: Fri, 18 Nov 2022 08:58:56 +0100 [thread overview]
Message-ID: <20221118075856.401373-2-richard.leitner@linux.dev> (raw)
In-Reply-To: <20221118075856.401373-1-richard.leitner@linux.dev>
From: Richard Leitner <richard.leitner@skidata.com>
Add InnoLux G070ACE-L01 7" 800x480 TFT LCD with WLED backlight panel
support. Timing data was extracted from datasheet and vendor provided
EDID file.
Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
---
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
---
drivers/gpu/drm/panel/panel-simple.c | 35 ++++++++++++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 2944228a8e2c..b2b5ec5839de 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -2142,6 +2142,38 @@ static const struct panel_desc innolux_at070tn92 = {
.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
};
+static const struct display_timing innolux_g070ace_l01_timing = {
+ .pixelclock = { 25200000, 35000000, 35700000 },
+ .hactive = { 800, 800, 800 },
+ .hfront_porch = { 30, 32, 87 },
+ .hback_porch = { 30, 32, 87 },
+ .hsync_len = { 1, 1, 1 },
+ .vactive = { 480, 480, 480 },
+ .vfront_porch = { 3, 3, 3 },
+ .vback_porch = { 13, 13, 13 },
+ .vsync_len = { 1, 1, 4 },
+ .flags = DISPLAY_FLAGS_DE_HIGH,
+};
+
+static const struct panel_desc innolux_g070ace_l01 = {
+ .timings = &innolux_g070ace_l01_timing,
+ .num_timings = 1,
+ .bpc = 8,
+ .size = {
+ .width = 152,
+ .height = 91,
+ },
+ .delay = {
+ .prepare = 10,
+ .enable = 50,
+ .disable = 50,
+ .unprepare = 500,
+ },
+ .bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
+ .bus_flags = DRM_BUS_FLAG_DE_HIGH,
+ .connector_type = DRM_MODE_CONNECTOR_LVDS,
+};
+
static const struct display_timing innolux_g070y2_l01_timing = {
.pixelclock = { 28000000, 29500000, 32000000 },
.hactive = { 800, 800, 800 },
@@ -4096,6 +4128,9 @@ static const struct of_device_id platform_of_match[] = {
}, {
.compatible = "innolux,at070tn92",
.data = &innolux_at070tn92,
+ }, {
+ .compatible = "innolux,g070ace-l01",
+ .data = &innolux_g070ace_l01,
}, {
.compatible = "innolux,g070y2-l01",
.data = &innolux_g070y2_l01,
--
2.38.1
next prev parent reply other threads:[~2022-11-18 8:00 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-18 7:58 [PATCH 1/2] dt-bindings: display: simple: add support for InnoLux G070ACE-L01 richard.leitner
2022-11-18 7:58 ` richard.leitner [this message]
2022-11-18 14:11 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221118075856.401373-2-richard.leitner@linux.dev \
--to=richard.leitner@linux.dev \
--cc=airlied@gmail.com \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-kernel@vger.kernel.org \
--cc=richard.leitner@skidata.com \
--cc=sam@ravnborg.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox