From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Bart Van Assche <bvanassche@acm.org>,
Douglas Gilbert <dgilbert@interlog.com>,
Damien Le Moal <damien.lemoal@opensource.wdc.com>,
"Martin K . Petersen" <martin.petersen@oracle.com>,
Sasha Levin <sashal@kernel.org>,
jejb@linux.ibm.com, linux-scsi@vger.kernel.org
Subject: [PATCH AUTOSEL 5.15 19/27] scsi: scsi_debug: Make the READ CAPACITY response compliant with ZBC
Date: Fri, 18 Nov 2022 21:13:44 -0500 [thread overview]
Message-ID: <20221119021352.1774592-19-sashal@kernel.org> (raw)
In-Reply-To: <20221119021352.1774592-1-sashal@kernel.org>
From: Bart Van Assche <bvanassche@acm.org>
[ Upstream commit ecb8c2580d37dbb641451049376d80c8afaa387f ]
From ZBC-1:
- RC BASIS = 0: The RETURNED LOGICAL BLOCK ADDRESS field indicates the
highest LBA of a contiguous range of zones that are not sequential write
required zones starting with the first zone.
- RC BASIS = 1: The RETURNED LOGICAL BLOCK ADDRESS field indicates the LBA
of the last logical block on the logical unit.
The current scsi_debug READ CAPACITY response does not comply with the
above if there are one or more sequential write required zones. SCSI
initiators need a way to retrieve the largest valid LBA from SCSI
devices. Reporting the largest valid LBA if there are one or more
sequential zones requires to set the RC BASIS field in the READ CAPACITY
response to one. Hence this patch.
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Suggested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221102193248.3177608-1-bvanassche@acm.org
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/scsi_debug.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index 747e1cbb7ec9..105a4babb3e4 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -1879,6 +1879,13 @@ static int resp_readcap16(struct scsi_cmnd *scp,
arr[14] |= 0x40;
}
+ /*
+ * Since the scsi_debug READ CAPACITY implementation always reports the
+ * total disk capacity, set RC BASIS = 1 for host-managed ZBC devices.
+ */
+ if (devip->zmodel == BLK_ZONED_HM)
+ arr[12] |= 1 << 4;
+
arr[15] = sdebug_lowest_aligned & 0xff;
if (have_dif_prot) {
--
2.35.1
next prev parent reply other threads:[~2022-11-19 2:23 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-19 2:13 [PATCH AUTOSEL 5.15 01/27] wifi: mac80211: fix memory free error when registering wiphy fail Sasha Levin
2022-11-19 2:13 ` [PATCH AUTOSEL 5.15 02/27] wifi: mac80211_hwsim: fix debugfs attribute ps with rc table support Sasha Levin
2022-11-19 2:13 ` [PATCH AUTOSEL 5.15 03/27] riscv: dts: sifive unleashed: Add PWM controlled LEDs Sasha Levin
2022-11-19 2:13 ` [PATCH AUTOSEL 5.15 04/27] audit: fix undefined behavior in bit shift for AUDIT_BIT Sasha Levin
2022-11-19 2:13 ` [PATCH AUTOSEL 5.15 05/27] wifi: airo: do not assign -1 to unsigned char Sasha Levin
2022-11-19 2:13 ` [PATCH AUTOSEL 5.15 06/27] wifi: mac80211: Fix ack frame idr leak when mesh has no route Sasha Levin
2022-11-19 2:13 ` [PATCH AUTOSEL 5.15 07/27] wifi: ath11k: Fix QCN9074 firmware boot on x86 Sasha Levin
2022-11-19 2:13 ` [PATCH AUTOSEL 5.15 08/27] spi: stm32: fix stm32_spi_prepare_mbr() that halves spi clk for every run Sasha Levin
2022-11-19 2:13 ` [PATCH AUTOSEL 5.15 09/27] clocksource/drivers/hyperv: add data structure for reference TSC MSR Sasha Levin
2022-11-19 2:13 ` [PATCH AUTOSEL 5.15 10/27] x86/hyperv: fix invalid writes to MSRs during root partition kexec Sasha Levin
2022-11-19 2:13 ` [PATCH AUTOSEL 5.15 11/27] selftests/bpf: Add verifier test for release_reference() Sasha Levin
2022-11-19 2:13 ` [PATCH AUTOSEL 5.15 12/27] Revert "net: macsec: report real_dev features when HW offloading is enabled" Sasha Levin
2022-11-19 2:13 ` [PATCH AUTOSEL 5.15 13/27] ACPI: video: Add backlight=native DMI quirk for Dell G15 5515 Sasha Levin
2022-11-19 13:20 ` Daniel Dadap
2022-11-24 16:53 ` Sasha Levin
2022-11-19 2:13 ` [PATCH AUTOSEL 5.15 14/27] platform/x86: ideapad-laptop: Disable touchpad_switch Sasha Levin
2022-11-19 2:13 ` [PATCH AUTOSEL 5.15 15/27] platform/x86: touchscreen_dmi: Add info for the RCA Cambio W101 v2 2-in-1 Sasha Levin
2022-11-19 2:13 ` [PATCH AUTOSEL 5.15 16/27] platform/x86/intel/pmt: Sapphire Rapids PMT errata fix Sasha Levin
2022-11-19 2:13 ` [PATCH AUTOSEL 5.15 17/27] platform/x86/intel/hid: Add some ACPI device IDs Sasha Levin
2022-11-19 2:13 ` [PATCH AUTOSEL 5.15 18/27] scsi: ibmvfc: Avoid path failures during live migration Sasha Levin
2022-11-19 2:13 ` Sasha Levin [this message]
2022-11-19 2:13 ` [PATCH AUTOSEL 5.15 20/27] drm: panel-orientation-quirks: Add quirk for Acer Switch V 10 (SW5-017) Sasha Levin
2022-11-19 2:13 ` [PATCH AUTOSEL 5.15 21/27] block, bfq: fix null pointer dereference in bfq_bio_bfqg() Sasha Levin
2022-11-19 2:13 ` [PATCH AUTOSEL 5.15 22/27] arm64/syscall: Include asm/ptrace.h in syscall_wrapper header Sasha Levin
2022-11-19 2:13 ` [PATCH AUTOSEL 5.15 23/27] nvmet: fix memory leak in nvmet_subsys_attr_model_store_locked Sasha Levin
2022-11-19 2:13 ` [PATCH AUTOSEL 5.15 24/27] Revert "drm/amdgpu: Revert "drm/amdgpu: getting fan speed pwm for vega10 properly"" Sasha Levin
2022-11-19 2:13 ` [PATCH AUTOSEL 5.15 25/27] ALSA: usb-audio: add quirk to fix Hamedal C20 disconnect issue Sasha Levin
2022-11-19 2:13 ` [PATCH AUTOSEL 5.15 26/27] RISC-V: vdso: Do not add missing symbols to version section in linker script Sasha Levin
2022-11-19 2:13 ` [PATCH AUTOSEL 5.15 27/27] MIPS: pic32: treat port as signed integer Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221119021352.1774592-19-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=bvanassche@acm.org \
--cc=damien.lemoal@opensource.wdc.com \
--cc=dgilbert@interlog.com \
--cc=jejb@linux.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox