From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Zhu Ning <zhuning0077@gmail.com>,
Zhu Ning <zhuning@everest-semi.com>,
Mark Brown <broonie@kernel.org>, Sasha Levin <sashal@kernel.org>,
cezary.rojewski@intel.com, pierre-louis.bossart@linux.intel.com,
liam.r.girdwood@linux.intel.com, peter.ujfalusi@linux.intel.com,
yung-chuan.liao@linux.intel.com,
ranjani.sridharan@linux.intel.com, kai.vehmanen@linux.intel.com,
perex@perex.cz, tiwai@suse.com, mchehab@kernel.org,
muralidhar.reddy@intel.com, andrey.turkin@gmail.com,
alsa-devel@alsa-project.org
Subject: [PATCH AUTOSEL 6.0 14/44] ASoC: sof_es8336: reduce pop noise on speaker
Date: Wed, 23 Nov 2022 07:40:23 -0500 [thread overview]
Message-ID: <20221123124057.264822-14-sashal@kernel.org> (raw)
In-Reply-To: <20221123124057.264822-1-sashal@kernel.org>
From: Zhu Ning <zhuning0077@gmail.com>
[ Upstream commit 89cdb224f2abe37ec4ac21ba0d9ddeb5a6a9cf68 ]
The Speaker GPIO needs to be turned on slightly behind the codec turned on.
It also need to be turned off slightly before the codec turned down.
Current code uses delay in DAPM_EVENT to do it but the mdelay delays the
DAPM itself and thus has no effect. A delayed_work is added to turn on the
speaker.
The Speaker is turned off in .trigger since trigger is called slightly
before the DAPM events.
Signed-off-by: Zhu Ning <zhuning@everest-semi.com>
------------
v1: cancel delayed work while disabling speaker.
Link: https://lore.kernel.org/r/20221028020456.90286-1-zhuning0077@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/intel/boards/sof_es8336.c | 60 ++++++++++++++++++++++-------
1 file changed, 46 insertions(+), 14 deletions(-)
diff --git a/sound/soc/intel/boards/sof_es8336.c b/sound/soc/intel/boards/sof_es8336.c
index 606cc3242a60..5c218a39ca20 100644
--- a/sound/soc/intel/boards/sof_es8336.c
+++ b/sound/soc/intel/boards/sof_es8336.c
@@ -63,6 +63,7 @@ struct sof_es8336_private {
struct snd_soc_jack jack;
struct list_head hdmi_pcm_list;
bool speaker_en;
+ struct delayed_work pcm_pop_work;
};
struct sof_hdmi_pcm {
@@ -111,6 +112,46 @@ static void log_quirks(struct device *dev)
dev_info(dev, "quirk headset at mic1 port enabled\n");
}
+static void pcm_pop_work_events(struct work_struct *work)
+{
+ struct sof_es8336_private *priv =
+ container_of(work, struct sof_es8336_private, pcm_pop_work.work);
+
+ gpiod_set_value_cansleep(priv->gpio_speakers, priv->speaker_en);
+
+ if (quirk & SOF_ES8336_HEADPHONE_GPIO)
+ gpiod_set_value_cansleep(priv->gpio_headphone, priv->speaker_en);
+
+}
+
+static int sof_8336_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+ struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
+ struct snd_soc_card *card = rtd->card;
+ struct sof_es8336_private *priv = snd_soc_card_get_drvdata(card);
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ case SNDRV_PCM_TRIGGER_RESUME:
+ break;
+
+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ case SNDRV_PCM_TRIGGER_SUSPEND:
+ case SNDRV_PCM_TRIGGER_STOP:
+ if (priv->speaker_en == false)
+ if (substream->stream == 0) {
+ cancel_delayed_work(&priv->pcm_pop_work);
+ gpiod_set_value_cansleep(priv->gpio_speakers, true);
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static int sof_es8316_speaker_power_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
@@ -122,19 +163,7 @@ static int sof_es8316_speaker_power_event(struct snd_soc_dapm_widget *w,
priv->speaker_en = !SND_SOC_DAPM_EVENT_ON(event);
- if (SND_SOC_DAPM_EVENT_ON(event))
- msleep(70);
-
- gpiod_set_value_cansleep(priv->gpio_speakers, priv->speaker_en);
-
- if (!(quirk & SOF_ES8336_HEADPHONE_GPIO))
- return 0;
-
- if (SND_SOC_DAPM_EVENT_ON(event))
- msleep(70);
-
- gpiod_set_value_cansleep(priv->gpio_headphone, priv->speaker_en);
-
+ queue_delayed_work(system_wq, &priv->pcm_pop_work, msecs_to_jiffies(70));
return 0;
}
@@ -344,6 +373,7 @@ static int sof_es8336_hw_params(struct snd_pcm_substream *substream,
/* machine stream operations */
static struct snd_soc_ops sof_es8336_ops = {
.hw_params = sof_es8336_hw_params,
+ .trigger = sof_8336_trigger,
};
static struct snd_soc_dai_link_component platform_component[] = {
@@ -722,7 +752,8 @@ static int sof_es8336_probe(struct platform_device *pdev)
}
INIT_LIST_HEAD(&priv->hdmi_pcm_list);
-
+ INIT_DELAYED_WORK(&priv->pcm_pop_work,
+ pcm_pop_work_events);
snd_soc_card_set_drvdata(card, priv);
if (mach->mach_params.dmic_num > 0) {
@@ -751,6 +782,7 @@ static int sof_es8336_remove(struct platform_device *pdev)
struct snd_soc_card *card = platform_get_drvdata(pdev);
struct sof_es8336_private *priv = snd_soc_card_get_drvdata(card);
+ cancel_delayed_work(&priv->pcm_pop_work);
gpiod_put(priv->gpio_speakers);
device_remove_software_node(priv->codec_dev);
put_device(priv->codec_dev);
--
2.35.1
next prev parent reply other threads:[~2022-11-23 12:42 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-23 12:40 [PATCH AUTOSEL 6.0 01/44] Input: synaptics - switch touchpad on HP Laptop 15-da3001TU to RMI mode Sasha Levin
2022-11-23 12:40 ` [PATCH AUTOSEL 6.0 02/44] dt-bindings: input: touchscreen: Add compatible for Goodix GT7986U chip Sasha Levin
2022-11-23 12:40 ` [PATCH AUTOSEL 6.0 03/44] ASoC: amd: yc: Add Alienware m17 R5 AMD into DMI table Sasha Levin
2022-11-23 12:40 ` [PATCH AUTOSEL 6.0 04/44] ASoC: Intel: bytcht_es8316: Add quirk for the Nanote UMPC-01 Sasha Levin
2022-11-23 12:40 ` [PATCH AUTOSEL 6.0 05/44] ASoC: Intel: soc-acpi: add ES83x6 support to IceLake Sasha Levin
2022-11-23 12:40 ` [PATCH AUTOSEL 6.0 06/44] tools: iio: iio_generic_buffer: Fix read size Sasha Levin
2022-11-23 12:40 ` [PATCH AUTOSEL 6.0 07/44] ASoC: hda: intel-dsp-config: add ES83x6 quirk for IceLake Sasha Levin
2022-11-23 12:40 ` [PATCH AUTOSEL 6.0 08/44] ASoC: SOF: ipc3-topology: use old pipeline teardown flow with SOF2.1 and older Sasha Levin
2022-11-23 12:40 ` [PATCH AUTOSEL 6.0 09/44] serial: 8250: 8250_omap: Avoid RS485 RTS glitch on ->set_termios() Sasha Levin
2022-11-23 12:40 ` [PATCH AUTOSEL 6.0 10/44] Revert "tty: n_gsm: avoid call of sleeping functions from atomic context" Sasha Levin
2022-11-23 12:40 ` [PATCH AUTOSEL 6.0 11/44] Revert "tty: n_gsm: replace kicktimer with delayed_work" Sasha Levin
2022-11-23 12:40 ` [PATCH AUTOSEL 6.0 12/44] Input: goodix - try resetting the controller when no config is set Sasha Levin
2022-11-23 12:40 ` [PATCH AUTOSEL 6.0 13/44] bpf: Convert BPF_DISPATCHER to use static_call() (not ftrace) Sasha Levin
2022-11-23 12:40 ` Sasha Levin [this message]
2022-11-23 12:40 ` [PATCH AUTOSEL 6.0 15/44] Input: soc_button_array - add use_low_level_irq module parameter Sasha Levin
2022-11-23 12:40 ` [PATCH AUTOSEL 6.0 16/44] Input: soc_button_array - add Acer Switch V 10 to dmi_use_low_level_irq[] Sasha Levin
2022-11-23 12:40 ` [PATCH AUTOSEL 6.0 17/44] pinctrl: qcom: sc8280xp: Rectify UFS reset pins Sasha Levin
2022-11-23 12:40 ` [PATCH AUTOSEL 6.0 18/44] Input: i8042 - apply probe defer to more ASUS ZenBook models Sasha Levin
2022-11-23 12:40 ` [PATCH AUTOSEL 6.0 19/44] ASoC: stm32: dfsdm: manage cb buffers cleanup Sasha Levin
2022-11-23 12:40 ` [PATCH AUTOSEL 6.0 20/44] xen-pciback: Allow setting PCI_MSIX_FLAGS_MASKALL too Sasha Levin
2022-11-23 12:40 ` [PATCH AUTOSEL 6.0 21/44] xen/platform-pci: add missing free_irq() in error path Sasha Levin
2022-11-23 12:40 ` [PATCH AUTOSEL 6.0 22/44] platform/x86: thinkpad_acpi: Enable s2idle quirk for 21A1 machine type Sasha Levin
2022-11-23 12:40 ` [PATCH AUTOSEL 6.0 23/44] platform/x86: asus-wmi: add missing pci_dev_put() in asus_wmi_set_xusb2pr() Sasha Levin
2022-11-23 12:40 ` [PATCH AUTOSEL 6.0 24/44] platform/x86: acer-wmi: Enable SW_TABLET_MODE on Switch V 10 (SW5-017) Sasha Levin
2022-11-23 12:40 ` [PATCH AUTOSEL 6.0 25/44] platform/surface: aggregator_registry: Add support for Surface Pro 9 Sasha Levin
2022-11-23 12:40 ` [PATCH AUTOSEL 6.0 26/44] drm/amd/display: use uclk pstate latency for fw assisted mclk validation dcn32 Sasha Levin
2022-11-23 12:40 ` [PATCH AUTOSEL 6.0 27/44] drm/amdgpu: disable BACO support on more cards Sasha Levin
2022-11-23 12:40 ` [PATCH AUTOSEL 6.0 28/44] drm/amdkfd: Fix a memory limit issue Sasha Levin
2022-11-23 12:40 ` [PATCH AUTOSEL 6.0 29/44] zonefs: fix zone report size in __zonefs_io_error() Sasha Levin
2022-11-23 12:40 ` [PATCH AUTOSEL 6.0 30/44] platform/surface: aggregator_registry: Add support for Surface Laptop 5 Sasha Levin
2022-11-23 12:40 ` [PATCH AUTOSEL 6.0 31/44] platform/x86: hp-wmi: Ignore Smart Experience App event Sasha Levin
2022-11-23 12:40 ` [PATCH AUTOSEL 6.0 32/44] platform/x86: ideapad-laptop: Fix interrupt storm on fn-lock toggle on some Yoga laptops Sasha Levin
2022-11-23 12:40 ` [PATCH AUTOSEL 6.0 33/44] platform/x86: ideapad-laptop: Add module parameters to match DMI quirk tables Sasha Levin
2022-11-23 12:40 ` [PATCH AUTOSEL 6.0 34/44] tcp: configurable source port perturb table size Sasha Levin
2022-11-23 12:40 ` [PATCH AUTOSEL 6.0 35/44] block: make dma_alignment a stacking queue_limit Sasha Levin
2022-11-23 12:40 ` [PATCH AUTOSEL 6.0 36/44] block: make blk_set_default_limits() private Sasha Levin
2022-11-23 12:40 ` [PATCH AUTOSEL 6.0 37/44] dm-integrity: set dma_alignment limit in io_hints Sasha Levin
2022-11-23 12:40 ` [PATCH AUTOSEL 6.0 38/44] dm-log-writes: " Sasha Levin
2022-11-23 12:40 ` [PATCH AUTOSEL 6.0 39/44] net: usb: qmi_wwan: add Telit 0x103a composition Sasha Levin
2022-11-23 12:40 ` [PATCH AUTOSEL 6.0 40/44] scsi: mpi3mr: Suppress command reply debug prints Sasha Levin
2022-11-23 12:40 ` [PATCH AUTOSEL 6.0 41/44] scsi: iscsi: Fix possible memory leak when device_register() failed Sasha Levin
2022-11-23 12:40 ` [PATCH AUTOSEL 6.0 42/44] gpu: host1x: Avoid trying to use GART on Tegra20 Sasha Levin
2022-11-23 12:40 ` [PATCH AUTOSEL 6.0 43/44] dm integrity: flush the journal on suspend Sasha Levin
2022-11-23 12:40 ` [PATCH AUTOSEL 6.0 44/44] dm integrity: clear " Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221123124057.264822-14-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=alsa-devel@alsa-project.org \
--cc=andrey.turkin@gmail.com \
--cc=broonie@kernel.org \
--cc=cezary.rojewski@intel.com \
--cc=kai.vehmanen@linux.intel.com \
--cc=liam.r.girdwood@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=muralidhar.reddy@intel.com \
--cc=perex@perex.cz \
--cc=peter.ujfalusi@linux.intel.com \
--cc=pierre-louis.bossart@linux.intel.com \
--cc=ranjani.sridharan@linux.intel.com \
--cc=stable@vger.kernel.org \
--cc=tiwai@suse.com \
--cc=yung-chuan.liao@linux.intel.com \
--cc=zhuning0077@gmail.com \
--cc=zhuning@everest-semi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox