From: Oded Gabbay <ogabbay@kernel.org>
To: linux-kernel@vger.kernel.org
Cc: Ofir Bitton <obitton@habana.ai>
Subject: [PATCH 7/8] habanalabs: fail driver load if EEPROM errors detected
Date: Wed, 23 Nov 2022 16:58:00 +0200 [thread overview]
Message-ID: <20221123145801.542029-7-ogabbay@kernel.org> (raw)
In-Reply-To: <20221123145801.542029-1-ogabbay@kernel.org>
From: Ofir Bitton <obitton@habana.ai>
In case EEPROM is not burned, firmware sets default EEPROM values.
As this is not valid in production, driver should fail load upon any
EEPROM error reported by firmware.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
---
drivers/misc/habanalabs/common/firmware_if.c | 23 ++++++++++----------
1 file changed, 11 insertions(+), 12 deletions(-)
diff --git a/drivers/misc/habanalabs/common/firmware_if.c b/drivers/misc/habanalabs/common/firmware_if.c
index cf8147e43833..228b92278e48 100644
--- a/drivers/misc/habanalabs/common/firmware_if.c
+++ b/drivers/misc/habanalabs/common/firmware_if.c
@@ -617,16 +617,12 @@ static bool fw_report_boot_dev0(struct hl_device *hdev, u32 err_val,
if (sts_val & CPU_BOOT_DEV_STS0_ENABLED)
dev_dbg(hdev->dev, "Device status0 %#x\n", sts_val);
- /* All warnings should go here in order not to reach the unknown error validation */
if (err_val & CPU_BOOT_ERR0_EEPROM_FAIL) {
- dev_warn(hdev->dev,
- "Device boot warning - EEPROM failure detected, default settings applied\n");
- /* This is a warning so we don't want it to disable the
- * device
- */
- err_val &= ~CPU_BOOT_ERR0_EEPROM_FAIL;
+ dev_err(hdev->dev, "Device boot error - EEPROM failure detected\n");
+ err_exists = true;
}
+ /* All warnings should go here in order not to reach the unknown error validation */
if (err_val & CPU_BOOT_ERR0_DRAM_SKIPPED) {
dev_warn(hdev->dev,
"Device boot warning - Skipped DRAM initialization\n");
@@ -2532,7 +2528,7 @@ static int hl_fw_dynamic_init_cpu(struct hl_device *hdev,
struct fw_load_mgr *fw_loader)
{
struct cpu_dyn_regs *dyn_regs;
- int rc;
+ int rc, fw_error_rc;
dev_info(hdev->dev,
"Loading %sfirmware to device, may take some time...\n",
@@ -2632,14 +2628,17 @@ static int hl_fw_dynamic_init_cpu(struct hl_device *hdev,
hl_fw_dynamic_update_linux_interrupt_if(hdev);
- return 0;
-
protocol_err:
- if (fw_loader->dynamic_loader.fw_desc_valid)
- fw_read_errors(hdev, le32_to_cpu(dyn_regs->cpu_boot_err0),
+ if (fw_loader->dynamic_loader.fw_desc_valid) {
+ fw_error_rc = fw_read_errors(hdev, le32_to_cpu(dyn_regs->cpu_boot_err0),
le32_to_cpu(dyn_regs->cpu_boot_err1),
le32_to_cpu(dyn_regs->cpu_boot_dev_sts0),
le32_to_cpu(dyn_regs->cpu_boot_dev_sts1));
+
+ if (fw_error_rc)
+ return fw_error_rc;
+ }
+
return rc;
}
--
2.25.1
next prev parent reply other threads:[~2022-11-23 14:58 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-23 14:57 [PATCH 1/8] habanalabs: fix rc when new CPUCP opcodes are not supported Oded Gabbay
2022-11-23 14:57 ` [PATCH 2/8] habanalabs: add RMWREG32_SHIFTED to set a val within a mask Oded Gabbay
2022-11-23 14:57 ` [PATCH 3/8] habanalabs: print context refcount value if hard reset fails Oded Gabbay
2022-11-23 14:57 ` [PATCH 4/8] habanalabs: don't put context in hl_encaps_handle_do_release_sob() Oded Gabbay
2022-11-23 14:57 ` [PATCH 5/8] habanalabs: clear non-released encapsulated signals Oded Gabbay
2022-11-23 14:57 ` [PATCH 6/8] habanalabs: make print of engines idle mask more readable Oded Gabbay
2022-11-23 14:58 ` Oded Gabbay [this message]
2022-11-23 14:58 ` [PATCH 8/8] habanalabs: fix VA range calculation Oded Gabbay
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221123145801.542029-7-ogabbay@kernel.org \
--to=ogabbay@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=obitton@habana.ai \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox