From: Manivannan Sadhasivam <mani@kernel.org>
To: Asutosh Das <quic_asutoshd@quicinc.com>
Cc: quic_cang@quicinc.com, martin.petersen@oracle.com,
linux-scsi@vger.kernel.org, quic_nguyenb@quicinc.com,
quic_xiaosenh@quicinc.com, stanley.chu@mediatek.com,
eddie.huang@mediatek.com, daejun7.park@samsung.com,
bvanassche@acm.org, avri.altman@wdc.com, beanhuo@micron.com,
linux-arm-msm@vger.kernel.org,
Alim Akhtar <alim.akhtar@samsung.com>,
"James E.J. Bottomley" <jejb@linux.ibm.com>,
Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@somainline.org>,
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
Jinyoung Choi <j-young.choi@samsung.com>,
Kiwoong Kim <kwmad.kim@samsung.com>,
open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v6 07/16] ufs: core: mcq: Calculate queue depth
Date: Tue, 29 Nov 2022 21:03:48 +0530 [thread overview]
Message-ID: <20221129153348.GG4931@workstation> (raw)
In-Reply-To: <219a71d08f1b528779ec6a1334de8b8dd5182db6.1669684648.git.quic_asutoshd@quicinc.com>
On Mon, Nov 28, 2022 at 05:20:48PM -0800, Asutosh Das wrote:
> The ufs device defines the supported queuedepth by
> bqueuedepth which has a max value of 256.
> The HC defines MAC (Max Active Commands) that define
> the max number of commands that in flight to the ufs
> device.
> Calculate and configure the nutrs based on both these
> values.
>
> Co-developed-by: Can Guo <quic_cang@quicinc.com>
> Signed-off-by: Can Guo <quic_cang@quicinc.com>
> Signed-off-by: Asutosh Das <quic_asutoshd@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Thanks,
Mani
> ---
> drivers/ufs/core/ufs-mcq.c | 35 +++++++++++++++++++++++++++++++++++
> drivers/ufs/core/ufshcd-priv.h | 9 +++++++++
> drivers/ufs/core/ufshcd.c | 17 ++++++++++++++++-
> drivers/ufs/host/ufs-qcom.c | 7 +++++++
> drivers/ufs/host/ufs-qcom.h | 1 +
> include/ufs/ufs.h | 2 ++
> include/ufs/ufshcd.h | 2 ++
> include/ufs/ufshci.h | 1 +
> 8 files changed, 73 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/ufs/core/ufs-mcq.c b/drivers/ufs/core/ufs-mcq.c
> index d6807e3..6f66bd7 100644
> --- a/drivers/ufs/core/ufs-mcq.c
> +++ b/drivers/ufs/core/ufs-mcq.c
> @@ -19,6 +19,9 @@
> #define UFS_MCQ_NUM_DEV_CMD_QUEUES 1
> #define UFS_MCQ_MIN_POLL_QUEUES 0
>
> +#define MAX_DEV_CMD_ENTRIES 2
> +#define MCQ_CFG_MAC_MASK GENMASK(16, 8)
> +
> static int rw_queue_count_set(const char *val, const struct kernel_param *kp)
> {
> return param_set_uint_minmax(val, kp, UFS_MCQ_MIN_RW_QUEUES,
> @@ -67,6 +70,38 @@ module_param_cb(poll_queues, &poll_queue_count_ops, &poll_queues, 0644);
> MODULE_PARM_DESC(poll_queues,
> "Number of poll queues used for r/w. Default value is 1");
>
> +/**
> + * ufshcd_mcq_decide_queue_depth - decide the queue depth
> + * @hba - per adapter instance
> + *
> + * Returns queue-depth on success, non-zero on error
> + *
> + * MAC - Max. Active Command of the Host Controller (HC)
> + * HC wouldn't send more than this commands to the device.
> + * It is mandatory to implement get_hba_mac() to enable MCQ mode.
> + * Calculates and adjusts the queue depth based on the depth
> + * supported by the HC and ufs device.
> + */
> +int ufshcd_mcq_decide_queue_depth(struct ufs_hba *hba)
> +{
> + int mac;
> +
> + /* Mandatory to implement get_hba_mac() */
> + mac = ufshcd_mcq_vops_get_hba_mac(hba);
> + if (mac < 0) {
> + dev_err(hba->dev, "Failed to get mac, err=%d\n", mac);
> + return mac;
> + }
> +
> + WARN_ON_ONCE(!hba->dev_info.bqueuedepth);
> + /*
> + * max. value of bqueuedepth = 256, mac is host dependent.
> + * It is mandatory for UFS device to define bQueueDepth if
> + * shared queuing architecture is enabled.
> + */
> + return min_t(int, mac, hba->dev_info.bqueuedepth);
> +}
> +
> static int ufshcd_mcq_config_nr_queues(struct ufs_hba *hba)
> {
> int i;
> diff --git a/drivers/ufs/core/ufshcd-priv.h b/drivers/ufs/core/ufshcd-priv.h
> index 74cb17b9..da974a9 100644
> --- a/drivers/ufs/core/ufshcd-priv.h
> +++ b/drivers/ufs/core/ufshcd-priv.h
> @@ -62,6 +62,7 @@ int ufshcd_query_flag(struct ufs_hba *hba, enum query_opcode opcode,
> enum flag_idn idn, u8 index, bool *flag_res);
> void ufshcd_auto_hibern8_update(struct ufs_hba *hba, u32 ahit);
> int ufshcd_mcq_init(struct ufs_hba *hba);
> +int ufshcd_mcq_decide_queue_depth(struct ufs_hba *hba);
>
> #define SD_ASCII_STD true
> #define SD_RAW false
> @@ -235,6 +236,14 @@ static inline int ufshcd_vops_mcq_config_resource(struct ufs_hba *hba)
> return -EOPNOTSUPP;
> }
>
> +static inline int ufshcd_mcq_vops_get_hba_mac(struct ufs_hba *hba)
> +{
> + if (hba->vops && hba->vops->get_hba_mac)
> + return hba->vops->get_hba_mac(hba);
> +
> + return -EOPNOTSUPP;
> +}
> +
> extern const struct ufs_pm_lvl_states ufs_pm_lvl_states[];
>
> /**
> diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
> index 9b78814..e17159a 100644
> --- a/drivers/ufs/core/ufshcd.c
> +++ b/drivers/ufs/core/ufshcd.c
> @@ -7807,6 +7807,7 @@ static int ufs_get_device_desc(struct ufs_hba *hba)
> /* getting Specification Version in big endian format */
> dev_info->wspecversion = desc_buf[DEVICE_DESC_PARAM_SPEC_VER] << 8 |
> desc_buf[DEVICE_DESC_PARAM_SPEC_VER + 1];
> + dev_info->bqueuedepth = desc_buf[DEVICE_DESC_PARAM_Q_DPTH];
> b_ufs_feature_sup = desc_buf[DEVICE_DESC_PARAM_UFS_FEAT];
>
> model_index = desc_buf[DEVICE_DESC_PARAM_PRDCT_NAME];
> @@ -8222,7 +8223,21 @@ static int ufshcd_add_lus(struct ufs_hba *hba)
>
> static int ufshcd_alloc_mcq(struct ufs_hba *hba)
> {
> - return ufshcd_mcq_init(hba);
> + int ret;
> + int old_nutrs = hba->nutrs;
> +
> + ret = ufshcd_mcq_decide_queue_depth(hba);
> + if (ret < 0)
> + return ret;
> +
> + hba->nutrs = ret;
> + ret = ufshcd_mcq_init(hba);
> + if (ret) {
> + hba->nutrs = old_nutrs;
> + return ret;
> + }
> +
> + return 0;
> }
>
> /**
> diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
> index 6bea541..ad7cde2 100644
> --- a/drivers/ufs/host/ufs-qcom.c
> +++ b/drivers/ufs/host/ufs-qcom.c
> @@ -1526,6 +1526,12 @@ static int ufs_qcom_mcq_config_resource(struct ufs_hba *hba)
> return ret;
> }
>
> +static int ufs_qcom_get_hba_mac(struct ufs_hba *hba)
> +{
> + /* Qualcomm HC supports up to 64 */
> + return MAX_SUPP_MAC;
> +}
> +
> /*
> * struct ufs_hba_qcom_vops - UFS QCOM specific variant operations
> *
> @@ -1550,6 +1556,7 @@ static const struct ufs_hba_variant_ops ufs_hba_qcom_vops = {
> .config_scaling_param = ufs_qcom_config_scaling_param,
> .program_key = ufs_qcom_ice_program_key,
> .mcq_config_resource = ufs_qcom_mcq_config_resource,
> + .get_hba_mac = ufs_qcom_get_hba_mac,
> };
>
> /**
> diff --git a/drivers/ufs/host/ufs-qcom.h b/drivers/ufs/host/ufs-qcom.h
> index 44466a3..f86e532 100644
> --- a/drivers/ufs/host/ufs-qcom.h
> +++ b/drivers/ufs/host/ufs-qcom.h
> @@ -16,6 +16,7 @@
> #define HBRN8_POLL_TOUT_MS 100
> #define DEFAULT_CLK_RATE_HZ 1000000
> #define BUS_VECTOR_NAME_LEN 32
> +#define MAX_SUPP_MAC 64
>
> #define UFS_HW_VER_MAJOR_SHFT (28)
> #define UFS_HW_VER_MAJOR_MASK (0x000F << UFS_HW_VER_MAJOR_SHFT)
> diff --git a/include/ufs/ufs.h b/include/ufs/ufs.h
> index ba2a1d8..5112418 100644
> --- a/include/ufs/ufs.h
> +++ b/include/ufs/ufs.h
> @@ -591,6 +591,8 @@ struct ufs_dev_info {
> u8 *model;
> u16 wspecversion;
> u32 clk_gating_wait_us;
> + /* Stores the depth of queue in UFS device */
> + u8 bqueuedepth;
>
> /* UFS HPB related flag */
> bool hpb_enabled;
> diff --git a/include/ufs/ufshcd.h b/include/ufs/ufshcd.h
> index 0e21a6a..9d7829a 100644
> --- a/include/ufs/ufshcd.h
> +++ b/include/ufs/ufshcd.h
> @@ -298,6 +298,7 @@ struct ufs_pwr_mode_info {
> * @program_key: program or evict an inline encryption key
> * @event_notify: called to notify important events
> * @mcq_config_resource: called to configure MCQ platform resources
> + * @get_hba_mac: called to get vendor specific mac value, mandatory for mcq mode
> */
> struct ufs_hba_variant_ops {
> const char *name;
> @@ -337,6 +338,7 @@ struct ufs_hba_variant_ops {
> void (*event_notify)(struct ufs_hba *hba,
> enum ufs_event_type evt, void *data);
> int (*mcq_config_resource)(struct ufs_hba *hba);
> + int (*get_hba_mac)(struct ufs_hba *hba);
> };
>
> /* clock gating state */
> diff --git a/include/ufs/ufshci.h b/include/ufs/ufshci.h
> index 4d4da06..67fcebd 100644
> --- a/include/ufs/ufshci.h
> +++ b/include/ufs/ufshci.h
> @@ -57,6 +57,7 @@ enum {
> REG_UFS_CCAP = 0x100,
> REG_UFS_CRYPTOCAP = 0x104,
>
> + REG_UFS_MCQ_CFG = 0x380,
> UFSHCI_CRYPTO_REG_SPACE_SIZE = 0x400,
> };
>
> --
> 2.7.4
>
next prev parent reply other threads:[~2022-11-29 15:34 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <cover.1669684648.git.quic_asutoshd@quicinc.com>
2022-11-29 1:20 ` [PATCH v6 01/16] ufs: core: Optimize duplicate code to read extended feature Asutosh Das
2022-11-29 15:24 ` Manivannan Sadhasivam
2022-11-29 1:20 ` [PATCH v6 02/16] ufs: core: Probe for ext_iid support Asutosh Das
2022-11-29 15:25 ` Manivannan Sadhasivam
2022-11-29 1:20 ` [PATCH v6 03/16] ufs: core: Introduce Multi-circular queue capability Asutosh Das
2022-11-29 1:20 ` [PATCH v6 04/16] ufs: core: Defer adding host to scsi if mcq is supported Asutosh Das
2022-11-29 15:26 ` Manivannan Sadhasivam
2022-11-29 1:20 ` [PATCH v6 05/16] ufs: core: mcq: Add support to allocate multiple queues Asutosh Das
2022-11-29 15:28 ` Manivannan Sadhasivam
2022-11-29 1:20 ` [PATCH v6 06/16] ufs: core: mcq: Configure resource regions Asutosh Das
2022-11-29 15:32 ` Manivannan Sadhasivam
2022-11-29 1:20 ` [PATCH v6 07/16] ufs: core: mcq: Calculate queue depth Asutosh Das
2022-11-29 15:33 ` Manivannan Sadhasivam [this message]
2022-11-29 1:20 ` [PATCH v6 08/16] ufs: core: mcq: Allocate memory for mcq mode Asutosh Das
2022-11-29 15:35 ` Manivannan Sadhasivam
2022-11-29 1:20 ` [PATCH v6 09/16] ufs: core: mcq: Configure operation and runtime interface Asutosh Das
2022-11-29 1:20 ` [PATCH v6 10/16] ufs: core: mcq: Use shared tags for MCQ mode Asutosh Das
2022-11-29 1:20 ` [PATCH v6 11/16] ufs: core: Prepare ufshcd_send_command for mcq Asutosh Das
2022-11-29 1:20 ` [PATCH v6 12/16] ufs: core: mcq: Find hardware queue to queue request Asutosh Das
2022-11-29 1:20 ` [PATCH v6 13/16] ufs: core: Prepare for completion in mcq Asutosh Das
2022-11-29 1:20 ` [PATCH v6 14/16] ufs: mcq: Add completion support of a cqe Asutosh Das
2022-11-29 15:37 ` Manivannan Sadhasivam
2022-11-29 1:20 ` [PATCH v6 15/16] ufs: core: mcq: Add completion support in poll Asutosh Das
2022-11-29 1:20 ` [PATCH v6 16/16] ufs: core: mcq: Enable Multi Circular Queue Asutosh Das
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221129153348.GG4931@workstation \
--to=mani@kernel.org \
--cc=agross@kernel.org \
--cc=alim.akhtar@samsung.com \
--cc=andersson@kernel.org \
--cc=avri.altman@wdc.com \
--cc=beanhuo@micron.com \
--cc=bvanassche@acm.org \
--cc=daejun7.park@samsung.com \
--cc=eddie.huang@mediatek.com \
--cc=j-young.choi@samsung.com \
--cc=jejb@linux.ibm.com \
--cc=konrad.dybcio@somainline.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=kwmad.kim@samsung.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=quic_asutoshd@quicinc.com \
--cc=quic_cang@quicinc.com \
--cc=quic_nguyenb@quicinc.com \
--cc=quic_xiaosenh@quicinc.com \
--cc=stanley.chu@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox