public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Manivannan Sadhasivam <mani@kernel.org>
To: Asutosh Das <quic_asutoshd@quicinc.com>
Cc: quic_cang@quicinc.com, martin.petersen@oracle.com,
	linux-scsi@vger.kernel.org, quic_nguyenb@quicinc.com,
	quic_xiaosenh@quicinc.com, stanley.chu@mediatek.com,
	eddie.huang@mediatek.com, daejun7.park@samsung.com,
	bvanassche@acm.org, avri.altman@wdc.com, beanhuo@micron.com,
	linux-arm-msm@vger.kernel.org,
	Alim Akhtar <alim.akhtar@samsung.com>,
	"James E.J. Bottomley" <jejb@linux.ibm.com>,
	Arthur Simchaev <Arthur.Simchaev@wdc.com>,
	Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
	Jinyoung Choi <j-young.choi@samsung.com>,
	Kiwoong Kim <kwmad.kim@samsung.com>,
	open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v6 08/16] ufs: core: mcq: Allocate memory for mcq mode
Date: Tue, 29 Nov 2022 21:05:19 +0530	[thread overview]
Message-ID: <20221129153519.GH4931@workstation> (raw)
In-Reply-To: <2616d76835732286e6d59d087f5dc1332a249964.1669684648.git.quic_asutoshd@quicinc.com>

On Mon, Nov 28, 2022 at 05:20:49PM -0800, Asutosh Das wrote:
> To read the bqueuedepth, the device descriptor is fetched
> in Single Doorbell Mode. This allocated memory may not be
> enough for MCQ mode because the number of tags supported
> in MCQ mode may be larger than in SDB mode.
> Hence, release the memory allocated in SDB mode and allocate
> memory for MCQ mode operation.
> Define the ufs hardware queue and Completion Queue Entry.
> 
> Co-developed-by: Can Guo <quic_cang@quicinc.com>
> Signed-off-by: Can Guo <quic_cang@quicinc.com>
> Signed-off-by: Asutosh Das <quic_asutoshd@quicinc.com>

Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>

Thanks,
Mani

> ---
>  drivers/ufs/core/ufs-mcq.c     | 59 ++++++++++++++++++++++++++++++++++++++++--
>  drivers/ufs/core/ufshcd-priv.h |  1 +
>  drivers/ufs/core/ufshcd.c      | 48 +++++++++++++++++++++++++++++++---
>  include/ufs/ufshcd.h           | 20 ++++++++++++++
>  include/ufs/ufshci.h           | 22 ++++++++++++++++
>  5 files changed, 145 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/ufs/core/ufs-mcq.c b/drivers/ufs/core/ufs-mcq.c
> index 6f66bd7..5496c62 100644
> --- a/drivers/ufs/core/ufs-mcq.c
> +++ b/drivers/ufs/core/ufs-mcq.c
> @@ -149,15 +149,70 @@ static int ufshcd_mcq_config_nr_queues(struct ufs_hba *hba)
>  	return 0;
>  }
>  
> +int ufshcd_mcq_memory_alloc(struct ufs_hba *hba)
> +{
> +	struct ufs_hw_queue *hwq;
> +	size_t utrdl_size, cqe_size;
> +	int i;
> +
> +	for (i = 0; i < hba->nr_hw_queues; i++) {
> +		hwq = &hba->uhq[i];
> +
> +		utrdl_size = sizeof(struct utp_transfer_req_desc) *
> +			     hwq->max_entries;
> +		hwq->sqe_base_addr = dmam_alloc_coherent(hba->dev, utrdl_size,
> +							 &hwq->sqe_dma_addr,
> +							 GFP_KERNEL);
> +		if (!hwq->sqe_dma_addr) {
> +			dev_err(hba->dev, "SQE allocation failed\n");
> +			return -ENOMEM;
> +		}
> +
> +		cqe_size = sizeof(struct cq_entry) * hwq->max_entries;
> +		hwq->cqe_base_addr = dmam_alloc_coherent(hba->dev, cqe_size,
> +							 &hwq->cqe_dma_addr,
> +							 GFP_KERNEL);
> +		if (!hwq->cqe_dma_addr) {
> +			dev_err(hba->dev, "CQE allocation failed\n");
> +			return -ENOMEM;
> +		}
> +	}
> +
> +	return 0;
> +}
> +
> +
>  int ufshcd_mcq_init(struct ufs_hba *hba)
>  {
> -	int ret;
> +	struct ufs_hw_queue *hwq;
> +	int ret, i;
>  
>  	ret = ufshcd_mcq_config_nr_queues(hba);
>  	if (ret)
>  		return ret;
>  
>  	ret = ufshcd_vops_mcq_config_resource(hba);
> -	return ret;
> +	if (ret)
> +		return ret;
> +
> +	hba->uhq = devm_kzalloc(hba->dev,
> +				hba->nr_hw_queues * sizeof(struct ufs_hw_queue),
> +				GFP_KERNEL);
> +	if (!hba->uhq) {
> +		dev_err(hba->dev, "ufs hw queue memory allocation failed\n");
> +		return -ENOMEM;
> +	}
> +
> +	for (i = 0; i < hba->nr_hw_queues; i++) {
> +		hwq = &hba->uhq[i];
> +		hwq->max_entries = hba->nutrs;
> +	}
> +
> +	/* The very first HW queue serves device commands */
> +	hba->dev_cmd_queue = &hba->uhq[0];
> +	/* Give dev_cmd_queue the minimal number of entries */
> +	hba->dev_cmd_queue->max_entries = MAX_DEV_CMD_ENTRIES;
> +
> +	return 0;
>  }
>  
> diff --git a/drivers/ufs/core/ufshcd-priv.h b/drivers/ufs/core/ufshcd-priv.h
> index da974a9..4146d27 100644
> --- a/drivers/ufs/core/ufshcd-priv.h
> +++ b/drivers/ufs/core/ufshcd-priv.h
> @@ -63,6 +63,7 @@ int ufshcd_query_flag(struct ufs_hba *hba, enum query_opcode opcode,
>  void ufshcd_auto_hibern8_update(struct ufs_hba *hba, u32 ahit);
>  int ufshcd_mcq_init(struct ufs_hba *hba);
>  int ufshcd_mcq_decide_queue_depth(struct ufs_hba *hba);
> +int ufshcd_mcq_memory_alloc(struct ufs_hba *hba);
>  
>  #define SD_ASCII_STD true
>  #define SD_RAW false
> diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
> index e17159a..7e931aa 100644
> --- a/drivers/ufs/core/ufshcd.c
> +++ b/drivers/ufs/core/ufshcd.c
> @@ -3740,6 +3740,14 @@ static int ufshcd_memory_alloc(struct ufs_hba *hba)
>  	}
>  
>  	/*
> +	 * Skip utmrdl allocation; it may have been
> +	 * allocated during first pass and not released during
> +	 * MCQ memory allocation.
> +	 * See ufshcd_release_sdb_queue() and ufshcd_config_mcq()
> +	 */
> +	if (hba->utmrdl_base_addr)
> +		goto skip_utmrdl;
> +	/*
>  	 * Allocate memory for UTP Task Management descriptors
>  	 * UFSHCI requires 1024 byte alignment of UTMRD
>  	 */
> @@ -3755,6 +3763,7 @@ static int ufshcd_memory_alloc(struct ufs_hba *hba)
>  		goto out;
>  	}
>  
> +skip_utmrdl:
>  	/* Allocate memory for local reference block */
>  	hba->lrb = devm_kcalloc(hba->dev,
>  				hba->nutrs, sizeof(struct ufshcd_lrb),
> @@ -8221,6 +8230,22 @@ static int ufshcd_add_lus(struct ufs_hba *hba)
>  	return ret;
>  }
>  
> +/* SDB - Single Doorbell */
> +static void ufshcd_release_sdb_queue(struct ufs_hba *hba, int nutrs)
> +{
> +	size_t ucdl_size, utrdl_size;
> +
> +	ucdl_size = sizeof(struct utp_transfer_cmd_desc) * nutrs;
> +	dmam_free_coherent(hba->dev, ucdl_size, hba->ucdl_base_addr,
> +			   hba->ucdl_dma_addr);
> +
> +	utrdl_size = sizeof(struct utp_transfer_req_desc) * nutrs;
> +	dmam_free_coherent(hba->dev, utrdl_size, hba->utrdl_base_addr,
> +			   hba->utrdl_dma_addr);
> +
> +	devm_kfree(hba->dev, hba->lrb);
> +}
> +
>  static int ufshcd_alloc_mcq(struct ufs_hba *hba)
>  {
>  	int ret;
> @@ -8232,12 +8257,29 @@ static int ufshcd_alloc_mcq(struct ufs_hba *hba)
>  
>  	hba->nutrs = ret;
>  	ret = ufshcd_mcq_init(hba);
> -	if (ret) {
> -		hba->nutrs = old_nutrs;
> -		return ret;
> +	if (ret)
> +		goto err;
> +
> +	/*
> +	 * Previously allocated memory for nutrs may not be enough in MCQ mode.
> +	 * Number of supported tags in MCQ mode may be larger than SDB mode.
> +	 */
> +	if (hba->nutrs != old_nutrs) {
> +		ufshcd_release_sdb_queue(hba, old_nutrs);
> +		ret = ufshcd_memory_alloc(hba);
> +		if (ret)
> +			goto err;
> +		ufshcd_host_memory_configure(hba);
>  	}
>  
> +	ret = ufshcd_mcq_memory_alloc(hba);
> +	if (ret)
> +		goto err;
> +
>  	return 0;
> +err:
> +	hba->nutrs = old_nutrs;
> +	return ret;
>  }
>  
>  /**
> diff --git a/include/ufs/ufshcd.h b/include/ufs/ufshcd.h
> index 9d7829a..90461f43 100644
> --- a/include/ufs/ufshcd.h
> +++ b/include/ufs/ufshcd.h
> @@ -865,6 +865,8 @@ enum ufshcd_res {
>   * @mcq_sup: is mcq supported by UFSHC
>   * @res: array of resource info of MCQ registers
>   * @mcq_base: Multi circular queue registers base address
> + * @uhq: array of supported hardware queues
> + * @dev_cmd_queue: Queue for issuing device management commands
>   */
>  struct ufs_hba {
>  	void __iomem *mmio_base;
> @@ -1020,6 +1022,24 @@ struct ufs_hba {
>  	bool mcq_sup;
>  	struct ufshcd_res_info res[RES_MAX];
>  	void __iomem *mcq_base;
> +	struct ufs_hw_queue *uhq;
> +	struct ufs_hw_queue *dev_cmd_queue;
> +};
> +
> +/**
> + * struct ufs_hw_queue - per hardware queue structure
> + * @sqe_base_addr: submission queue entry base address
> + * @sqe_dma_addr: submission queue dma address
> + * @cqe_base_addr: completion queue base address
> + * @cqe_dma_addr: completion queue dma address
> + * @max_entries: max number of slots in this hardware queue
> + */
> +struct ufs_hw_queue {
> +	void *sqe_base_addr;
> +	dma_addr_t sqe_dma_addr;
> +	struct cq_entry *cqe_base_addr;
> +	dma_addr_t cqe_dma_addr;
> +	u32 max_entries;
>  };
>  
>  /* Returns true if clocks can be gated. Otherwise false */
> diff --git a/include/ufs/ufshci.h b/include/ufs/ufshci.h
> index 67fcebd..15d1ea2 100644
> --- a/include/ufs/ufshci.h
> +++ b/include/ufs/ufshci.h
> @@ -486,6 +486,28 @@ struct utp_transfer_req_desc {
>  	__le16  prd_table_offset;
>  };
>  
> +/* MCQ Completion Queue Entry */
> +struct cq_entry {
> +	/* DW 0-1 */
> +	__le64 command_desc_base_addr;
> +
> +	/* DW 2 */
> +	__le16  response_upiu_length;
> +	__le16  response_upiu_offset;
> +
> +	/* DW 3 */
> +	__le16  prd_table_length;
> +	__le16  prd_table_offset;
> +
> +	/* DW 4 */
> +	__le32 status;
> +
> +	/* DW 5-7 */
> +	__le32 reserved[3];
> +};
> +
> +static_assert(sizeof(struct cq_entry) == 32);
> +
>  /*
>   * UTMRD structure.
>   */
> -- 
> 2.7.4
> 

  reply	other threads:[~2022-11-29 15:35 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <cover.1669684648.git.quic_asutoshd@quicinc.com>
2022-11-29  1:20 ` [PATCH v6 01/16] ufs: core: Optimize duplicate code to read extended feature Asutosh Das
2022-11-29 15:24   ` Manivannan Sadhasivam
2022-11-29  1:20 ` [PATCH v6 02/16] ufs: core: Probe for ext_iid support Asutosh Das
2022-11-29 15:25   ` Manivannan Sadhasivam
2022-11-29  1:20 ` [PATCH v6 03/16] ufs: core: Introduce Multi-circular queue capability Asutosh Das
2022-11-29  1:20 ` [PATCH v6 04/16] ufs: core: Defer adding host to scsi if mcq is supported Asutosh Das
2022-11-29 15:26   ` Manivannan Sadhasivam
2022-11-29  1:20 ` [PATCH v6 05/16] ufs: core: mcq: Add support to allocate multiple queues Asutosh Das
2022-11-29 15:28   ` Manivannan Sadhasivam
2022-11-29  1:20 ` [PATCH v6 06/16] ufs: core: mcq: Configure resource regions Asutosh Das
2022-11-29 15:32   ` Manivannan Sadhasivam
2022-11-29  1:20 ` [PATCH v6 07/16] ufs: core: mcq: Calculate queue depth Asutosh Das
2022-11-29 15:33   ` Manivannan Sadhasivam
2022-11-29  1:20 ` [PATCH v6 08/16] ufs: core: mcq: Allocate memory for mcq mode Asutosh Das
2022-11-29 15:35   ` Manivannan Sadhasivam [this message]
2022-11-29  1:20 ` [PATCH v6 09/16] ufs: core: mcq: Configure operation and runtime interface Asutosh Das
2022-11-29  1:20 ` [PATCH v6 10/16] ufs: core: mcq: Use shared tags for MCQ mode Asutosh Das
2022-11-29  1:20 ` [PATCH v6 11/16] ufs: core: Prepare ufshcd_send_command for mcq Asutosh Das
2022-11-29  1:20 ` [PATCH v6 12/16] ufs: core: mcq: Find hardware queue to queue request Asutosh Das
2022-11-29  1:20 ` [PATCH v6 13/16] ufs: core: Prepare for completion in mcq Asutosh Das
2022-11-29  1:20 ` [PATCH v6 14/16] ufs: mcq: Add completion support of a cqe Asutosh Das
2022-11-29 15:37   ` Manivannan Sadhasivam
2022-11-29  1:20 ` [PATCH v6 15/16] ufs: core: mcq: Add completion support in poll Asutosh Das
2022-11-29  1:20 ` [PATCH v6 16/16] ufs: core: mcq: Enable Multi Circular Queue Asutosh Das

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221129153519.GH4931@workstation \
    --to=mani@kernel.org \
    --cc=Arthur.Simchaev@wdc.com \
    --cc=alim.akhtar@samsung.com \
    --cc=avri.altman@wdc.com \
    --cc=beanhuo@micron.com \
    --cc=bvanassche@acm.org \
    --cc=daejun7.park@samsung.com \
    --cc=eddie.huang@mediatek.com \
    --cc=j-young.choi@samsung.com \
    --cc=jejb@linux.ibm.com \
    --cc=krzysztof.kozlowski@linaro.org \
    --cc=kwmad.kim@samsung.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=quic_asutoshd@quicinc.com \
    --cc=quic_cang@quicinc.com \
    --cc=quic_nguyenb@quicinc.com \
    --cc=quic_xiaosenh@quicinc.com \
    --cc=stanley.chu@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox