From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>,
Andrew Lunn <andrew@lunn.ch>,
"David S . Miller" <davem@davemloft.net>,
Sasha Levin <sashal@kernel.org>,
qiangqing.zhang@nxp.com, edumazet@google.com, kuba@kernel.org,
pabeni@redhat.com, netdev@vger.kernel.org
Subject: [PATCH AUTOSEL 6.0 08/13] net: fec: don't reset irq coalesce settings to defaults on "ip link up"
Date: Tue, 6 Dec 2022 04:49:11 -0500 [thread overview]
Message-ID: <20221206094916.987259-8-sashal@kernel.org> (raw)
In-Reply-To: <20221206094916.987259-1-sashal@kernel.org>
From: Rasmus Villemoes <linux@rasmusvillemoes.dk>
[ Upstream commit df727d4547de568302b0ed15b0d4e8a469bdb456 ]
Currently, when a FEC device is brought up, the irq coalesce settings
are reset to their default values (1000us, 200 frames). That's
unexpected, and breaks for example use of an appropriate .link file to
make systemd-udev apply the desired
settings (https://www.freedesktop.org/software/systemd/man/systemd.link.html),
or any other method that would do a one-time setup during early boot.
Refactor the code so that fec_restart() instead uses
fec_enet_itr_coal_set(), which simply applies the settings that are
stored in the private data, and initialize that private data with the
default values.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/freescale/fec_main.c | 22 ++++++----------------
1 file changed, 6 insertions(+), 16 deletions(-)
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 5aa254eaa8d0..b71e0c32e351 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -72,7 +72,7 @@
#include "fec.h"
static void set_multicast_list(struct net_device *ndev);
-static void fec_enet_itr_coal_init(struct net_device *ndev);
+static void fec_enet_itr_coal_set(struct net_device *ndev);
#define DRIVER_NAME "fec"
@@ -1164,8 +1164,7 @@ fec_restart(struct net_device *ndev)
writel(0, fep->hwp + FEC_IMASK);
/* Init the interrupt coalescing */
- fec_enet_itr_coal_init(ndev);
-
+ fec_enet_itr_coal_set(ndev);
}
static void fec_enet_stop_mode(struct fec_enet_private *fep, bool enabled)
@@ -2771,19 +2770,6 @@ static int fec_enet_set_coalesce(struct net_device *ndev,
return 0;
}
-static void fec_enet_itr_coal_init(struct net_device *ndev)
-{
- struct ethtool_coalesce ec;
-
- ec.rx_coalesce_usecs = FEC_ITR_ICTT_DEFAULT;
- ec.rx_max_coalesced_frames = FEC_ITR_ICFT_DEFAULT;
-
- ec.tx_coalesce_usecs = FEC_ITR_ICTT_DEFAULT;
- ec.tx_max_coalesced_frames = FEC_ITR_ICFT_DEFAULT;
-
- fec_enet_set_coalesce(ndev, &ec, NULL, NULL);
-}
-
static int fec_enet_get_tunable(struct net_device *netdev,
const struct ethtool_tunable *tuna,
void *data)
@@ -3538,6 +3524,10 @@ static int fec_enet_init(struct net_device *ndev)
fep->rx_align = 0x3;
fep->tx_align = 0x3;
#endif
+ fep->rx_pkts_itr = FEC_ITR_ICFT_DEFAULT;
+ fep->tx_pkts_itr = FEC_ITR_ICFT_DEFAULT;
+ fep->rx_time_itr = FEC_ITR_ICTT_DEFAULT;
+ fep->tx_time_itr = FEC_ITR_ICTT_DEFAULT;
/* Check mask of the streaming and coherent API */
ret = dma_set_mask_and_coherent(&fep->pdev->dev, DMA_BIT_MASK(32));
--
2.35.1
next prev parent reply other threads:[~2022-12-06 9:50 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-06 9:49 [PATCH AUTOSEL 6.0 01/13] ASoC: fsl_micfil: explicitly clear software reset bit Sasha Levin
2022-12-06 9:49 ` [PATCH AUTOSEL 6.0 02/13] ASoC: fsl_micfil: explicitly clear CHnF flags Sasha Levin
2022-12-06 9:49 ` [PATCH AUTOSEL 6.0 03/13] ASoC: ops: Check bounds for second channel in snd_soc_put_volsw_sx() Sasha Levin
2022-12-06 9:49 ` [PATCH AUTOSEL 6.0 04/13] libbpf: Use page size as max_entries when probing ring buffer map Sasha Levin
2022-12-06 9:49 ` [PATCH AUTOSEL 6.0 05/13] pinctrl: meditatek: Startup with the IRQs disabled Sasha Levin
2022-12-06 9:49 ` [PATCH AUTOSEL 6.0 06/13] can: sja1000: fix size of OCR_MODE_MASK define Sasha Levin
2022-12-06 9:49 ` [PATCH AUTOSEL 6.0 07/13] can: mcba_usb: Fix termination command argument Sasha Levin
2022-12-06 9:49 ` Sasha Levin [this message]
2022-12-06 9:55 ` [PATCH AUTOSEL 6.0 08/13] net: fec: don't reset irq coalesce settings to defaults on "ip link up" Rasmus Villemoes
2022-12-06 9:49 ` [PATCH AUTOSEL 6.0 09/13] net: loopback: use NET_NAME_PREDICTABLE for name_assign_type Sasha Levin
2022-12-06 19:49 ` Jakub Kicinski
2022-12-07 2:20 ` Sasha Levin
2022-12-07 2:49 ` Jakub Kicinski
2022-12-07 3:56 ` Sasha Levin
2022-12-06 9:49 ` [PATCH AUTOSEL 6.0 10/13] ASoC: cs42l51: Correct PGA Volume minimum value Sasha Levin
2022-12-06 9:49 ` [PATCH AUTOSEL 6.0 11/13] perf: Fix perf_pending_task() UaF Sasha Levin
2022-12-06 9:49 ` [PATCH AUTOSEL 6.0 12/13] nvme-pci: clear the prp2 field when not used Sasha Levin
2022-12-06 9:49 ` [PATCH AUTOSEL 6.0 13/13] v4l2: don't fall back to follow_pfn() if pin_user_pages_fast() fails Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221206094916.987259-8-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@rasmusvillemoes.dk \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=qiangqing.zhang@nxp.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox