public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org
Cc: Jonathan Cameron <jic23@kernel.org>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Ferry Toth <ftoth@exalondelft.nl>
Subject: [PATCH v1 04/11] iio: light: tsl2563: Make use of the macros from bits.h
Date: Wed,  7 Dec 2022 21:03:41 +0200	[thread overview]
Message-ID: <20221207190348.9347-4-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <20221207190348.9347-1-andriy.shevchenko@linux.intel.com>

Make use of BIT() and GENMASK() where it makes sense.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Ferry Toth <ftoth@exalondelft.nl>
---
 drivers/iio/light/tsl2563.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/drivers/iio/light/tsl2563.c b/drivers/iio/light/tsl2563.c
index d071805239ef..3b60d8000351 100644
--- a/drivers/iio/light/tsl2563.c
+++ b/drivers/iio/light/tsl2563.c
@@ -11,6 +11,7 @@
  * Amit Kucheria <amit.kucheria@verdurent.com>
  */
 
+#include <linux/bits.h>
 #include <linux/module.h>
 #include <linux/mod_devicetable.h>
 #include <linux/property.h>
@@ -33,19 +34,19 @@
 #define ADC_FRAC_BITS		14
 
 /* Given number of 1/10000's in ADC_FRAC_BITS precision. */
-#define FRAC10K(f)		(((f) * (1L << (ADC_FRAC_BITS))) / (10000))
+#define FRAC10K(f)		(((f) * BIT(ADC_FRAC_BITS)) / (10000))
 
 /* Bits used for fraction in calibration coefficients.*/
 #define CALIB_FRAC_BITS		10
 /* 0.5 in CALIB_FRAC_BITS precision */
-#define CALIB_FRAC_HALF		(1 << (CALIB_FRAC_BITS - 1))
+#define CALIB_FRAC_HALF		BIT(CALIB_FRAC_BITS - 1)
 /* Make a fraction from a number n that was multiplied with b. */
 #define CALIB_FRAC(n, b)	(((n) << CALIB_FRAC_BITS) / (b))
 /* Decimal 10^(digits in sysfs presentation) */
 #define CALIB_BASE_SYSFS	1000
 
-#define TSL2563_CMD		0x80
-#define TSL2563_CLEARINT	0x40
+#define TSL2563_CMD		BIT(7)
+#define TSL2563_CLEARINT	BIT(6)
 
 #define TSL2563_REG_CTRL	0x00
 #define TSL2563_REG_TIMING	0x01
@@ -58,19 +59,19 @@
 
 #define TSL2563_CMD_POWER_ON	0x03
 #define TSL2563_CMD_POWER_OFF	0x00
-#define TSL2563_CTRL_POWER_MASK	0x03
+#define TSL2563_CTRL_POWER_MASK	GENMASK(1, 0)
 
 #define TSL2563_TIMING_13MS	0x00
 #define TSL2563_TIMING_100MS	0x01
 #define TSL2563_TIMING_400MS	0x02
-#define TSL2563_TIMING_MASK	0x03
+#define TSL2563_TIMING_MASK	GENMASK(1, 0)
 #define TSL2563_TIMING_GAIN16	0x10
 #define TSL2563_TIMING_GAIN1	0x00
 
 #define TSL2563_INT_DISABLED	0x00
 #define TSL2563_INT_LEVEL	0x10
-#define TSL2563_INT_MASK	0x30
-#define TSL2563_INT_PERSIST(n)	((n) & 0x0F)
+#define TSL2563_INT_MASK	GENMASK(5, 4)
+#define TSL2563_INT_PERSIST(n)	((n) & GENMASK(3, 0))
 
 struct tsl2563_gainlevel_coeff {
 	u8 gaintime;
-- 
2.35.1


  parent reply	other threads:[~2022-12-07 19:04 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-12-07 19:03 [PATCH v1 01/11] iio: light: tsl2563: Do not hardcode interrupt trigger type Andy Shevchenko
2022-12-07 19:03 ` [PATCH v1 02/11] iio: light: tsl2563: Use i2c_smbus_write_word_data() in tsl2563_configure() Andy Shevchenko
2022-12-07 19:03 ` [PATCH v1 03/11] iio: light: tsl2563: Configure INT in one place Andy Shevchenko
2022-12-11 13:17   ` Jonathan Cameron
2022-12-07 19:03 ` Andy Shevchenko [this message]
2022-12-11 13:19   ` [PATCH v1 04/11] iio: light: tsl2563: Make use of the macros from bits.h Jonathan Cameron
2022-12-07 19:03 ` [PATCH v1 05/11] iio: light: tsl2563: Drop unused defintion(s) Andy Shevchenko
2022-12-07 19:03 ` [PATCH v1 06/11] iio: light: tsl2563: Simplify with dev_err_probe Andy Shevchenko
2022-12-07 19:03 ` [PATCH v1 07/11] iio: light: tsl2563: Drop legacy platform data code Andy Shevchenko
2022-12-07 19:03 ` [PATCH v1 08/11] iio: light: tsl2563: Utilise temporary variable for struct device Andy Shevchenko
2022-12-07 19:03 ` [PATCH v1 09/11] iio: light: tsl2563: Use dev_get_drvdata() directly in PM callbacks Andy Shevchenko
2022-12-07 19:03 ` [PATCH v1 10/11] iio: light: tsl2563: sort header inclusion alphabetically Andy Shevchenko
2022-12-07 19:03 ` [PATCH v1 11/11] iio: light: tsl2563: Keep Makefile sorted by module name Andy Shevchenko
2022-12-11 13:26 ` [PATCH v1 01/11] iio: light: tsl2563: Do not hardcode interrupt trigger type Jonathan Cameron
2022-12-11 17:14   ` Ferry Toth
2022-12-12 10:59     ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221207190348.9347-4-andriy.shevchenko@linux.intel.com \
    --to=andriy.shevchenko@linux.intel.com \
    --cc=ftoth@exalondelft.nl \
    --cc=jic23@kernel.org \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox