From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Mike McGowen <mike.mcgowen@microchip.com>,
Scott Benesh <scott.benesh@microchip.com>,
Scott Teel <scott.teel@microchip.com>,
Don Brace <don.brace@microchip.com>,
"Martin K . Petersen" <martin.petersen@oracle.com>,
Sasha Levin <sashal@kernel.org>,
jejb@linux.ibm.com, storagedev@microchip.com,
linux-scsi@vger.kernel.org
Subject: [PATCH AUTOSEL 6.1 08/16] scsi: smartpqi: Add new controller PCI IDs
Date: Mon, 19 Dec 2022 20:20:45 -0500 [thread overview]
Message-ID: <20221220012053.1222101-8-sashal@kernel.org> (raw)
In-Reply-To: <20221220012053.1222101-1-sashal@kernel.org>
From: Mike McGowen <mike.mcgowen@microchip.com>
[ Upstream commit 0b93cf2a9097b1c3d75642ef878ba87f15f03043 ]
All PCI ID entries in Hex.
Add PCI IDs for ByteDance controllers:
VID / DID / SVID / SDID
---- ---- ---- ----
ByteHBA JGH43024-8 9005 / 028f / 1e93 / 1000
ByteHBA JGH43034-8 9005 / 028f / 1e93 / 1001
ByteHBA JGH44014-8 9005 / 028f / 1e93 / 1002
Add PCI IDs for new Inspur controllers:
VID / DID / SVID / SDID
---- ---- ---- ----
INSPUR RT0800M7E 9005 / 028f / 1bd4 / 0086
INSPUR RT0800M7H 9005 / 028f / 1bd4 / 0087
INSPUR RT0804M7R 9005 / 028f / 1bd4 / 0088
INSPUR RT0808M7R 9005 / 028f / 1bd4 / 0089
Add PCI IDs for new FAB A controllers:
VID / DID / SVID / SDID
---- ---- ---- ----
Adaptec SmartRAID 3254-16e /e 9005 / 028f / 9005 / 1475
Adaptec HBA 1200-16e 9005 / 028f / 9005 / 14c3
Adaptec HBA 1200-8e 9005 / 028f / 9005 / 14c4
Add H3C controller PCI IDs:
VID / DID / SVID / SDID
---- ---- ---- ----
H3C H4508-Mf-8i 9005 / 028f / 193d / 110b
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Signed-off-by: Mike McGowen <mike.mcgowen@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/166793530327.322537.6056884426657539311.stgit@brunhilda
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/smartpqi/smartpqi_init.c | 44 +++++++++++++++++++++++++++
1 file changed, 44 insertions(+)
diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
index b971fbe3b3a1..78fc743f46e4 100644
--- a/drivers/scsi/smartpqi/smartpqi_init.c
+++ b/drivers/scsi/smartpqi/smartpqi_init.c
@@ -9302,6 +9302,10 @@ static const struct pci_device_id pqi_pci_id_table[] = {
PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
0x193d, 0x1109)
},
+ {
+ PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+ 0x193d, 0x110b)
+ },
{
PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
0x193d, 0x8460)
@@ -9402,6 +9406,22 @@ static const struct pci_device_id pqi_pci_id_table[] = {
PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
0x1bd4, 0x0072)
},
+ {
+ PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+ 0x1bd4, 0x0086)
+ },
+ {
+ PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+ 0x1bd4, 0x0087)
+ },
+ {
+ PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+ 0x1bd4, 0x0088)
+ },
+ {
+ PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+ 0x1bd4, 0x0089)
+ },
{
PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
0x19e5, 0xd227)
@@ -9650,6 +9670,10 @@ static const struct pci_device_id pqi_pci_id_table[] = {
PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
PCI_VENDOR_ID_ADAPTEC2, 0x1474)
},
+ {
+ PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+ PCI_VENDOR_ID_ADAPTEC2, 0x1475)
+ },
{
PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
PCI_VENDOR_ID_ADAPTEC2, 0x1480)
@@ -9706,6 +9730,14 @@ static const struct pci_device_id pqi_pci_id_table[] = {
PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
PCI_VENDOR_ID_ADAPTEC2, 0x14c2)
},
+ {
+ PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+ PCI_VENDOR_ID_ADAPTEC2, 0x14c3)
+ },
+ {
+ PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+ PCI_VENDOR_ID_ADAPTEC2, 0x14c4)
+ },
{
PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
PCI_VENDOR_ID_ADAPTEC2, 0x14d0)
@@ -9942,6 +9974,18 @@ static const struct pci_device_id pqi_pci_id_table[] = {
PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
PCI_VENDOR_ID_LENOVO, 0x0623)
},
+ {
+ PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+ 0x1e93, 0x1000)
+ },
+ {
+ PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+ 0x1e93, 0x1001)
+ },
+ {
+ PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+ 0x1e93, 0x1002)
+ },
{
PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
PCI_ANY_ID, PCI_ANY_ID)
--
2.35.1
next prev parent reply other threads:[~2022-12-20 1:22 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-20 1:20 [PATCH AUTOSEL 6.1 01/16] crypto: hisilicon/hpre - fix resource leak in remove process Sasha Levin
2022-12-20 1:20 ` [PATCH AUTOSEL 6.1 02/16] scsi: lpfc: Fix hard lockup when reading the rx_monitor from debugfs Sasha Levin
2022-12-20 1:20 ` [PATCH AUTOSEL 6.1 03/16] scsi: ufs: Reduce the START STOP UNIT timeout Sasha Levin
2022-12-20 1:20 ` [PATCH AUTOSEL 6.1 04/16] crypto: hisilicon/qm - increase the memory of local variables Sasha Levin
2022-12-20 1:20 ` [PATCH AUTOSEL 6.1 05/16] Revert "PCI: Clear PCI_STATUS when setting up device" Sasha Levin
2022-12-20 1:20 ` [PATCH AUTOSEL 6.1 06/16] scsi: elx: libefc: Fix second parameter type in state callbacks Sasha Levin
2022-12-20 1:20 ` [PATCH AUTOSEL 6.1 07/16] hugetlbfs: fix null-ptr-deref in hugetlbfs_parse_param() Sasha Levin
2022-12-20 1:20 ` Sasha Levin [this message]
2022-12-20 1:20 ` [PATCH AUTOSEL 6.1 09/16] scsi: smartpqi: Correct device removal for multi-actuator devices Sasha Levin
2022-12-20 1:20 ` [PATCH AUTOSEL 6.1 10/16] drm/fsl-dcu: Fix return type of fsl_dcu_drm_connector_mode_valid() Sasha Levin
2022-12-20 1:20 ` [PATCH AUTOSEL 6.1 11/16] drm/sti: Fix return type of sti_{dvo,hda,hdmi}_connector_mode_valid() Sasha Levin
2022-12-20 1:20 ` [PATCH AUTOSEL 6.1 12/16] scsi: target: iscsi: Fix a race condition between login_work and the login thread Sasha Levin
2022-12-20 1:20 ` [PATCH AUTOSEL 6.1 13/16] iomap: write iomap validity checks Sasha Levin
2022-12-20 4:01 ` Dave Chinner
2022-12-21 12:19 ` Sasha Levin
2022-12-20 1:20 ` [PATCH AUTOSEL 6.1 14/16] orangefs: Fix kmemleak in orangefs_prepare_debugfs_help_string() Sasha Levin
2022-12-20 1:20 ` [PATCH AUTOSEL 6.1 15/16] orangefs: Fix kmemleak in orangefs_sysfs_init() Sasha Levin
2022-12-20 1:20 ` [PATCH AUTOSEL 6.1 16/16] orangefs: Fix kmemleak in orangefs_{kernel,client}_debug_init() Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221220012053.1222101-8-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=don.brace@microchip.com \
--cc=jejb@linux.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=mike.mcgowen@microchip.com \
--cc=scott.benesh@microchip.com \
--cc=scott.teel@microchip.com \
--cc=stable@vger.kernel.org \
--cc=storagedev@microchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox