* [PATCH] arm64: dts: imx8mp: Enable spba-bus on AIPS3
@ 2022-12-18 17:05 Adam Ford
2022-12-21 14:45 ` Marco Felsch
2023-01-01 4:47 ` Shawn Guo
0 siblings, 2 replies; 3+ messages in thread
From: Adam Ford @ 2022-12-18 17:05 UTC (permalink / raw)
To: linux-arm-kernel
Cc: aford, marex, Adam Ford, Rob Herring, Krzysztof Kozlowski,
Shawn Guo, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
NXP Linux Team, devicetree, linux-kernel
There is an SPBA bus on AIPS3 which includes ecspi1-3,
UART1-3, and Flexcan1-2 according to the TRM.
Signed-off-by: Adam Ford <aford173@gmail.com>
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index 2ce45e7cbbdf..9b0a47e7b8fd 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -719,121 +719,129 @@ aips3: bus@30800000 {
#size-cells = <1>;
ranges;
- ecspi1: spi@30820000 {
+ spba-bus@30800000 {
+ compatible = "fsl,spba-bus", "simple-bus";
+ reg = <0x30800000 0x100000>;
#address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx8mp-ecspi", "fsl,imx6ul-ecspi";
- reg = <0x30820000 0x10000>;
- interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MP_CLK_ECSPI1_ROOT>,
- <&clk IMX8MP_CLK_ECSPI1_ROOT>;
- clock-names = "ipg", "per";
- assigned-clock-rates = <80000000>;
- assigned-clocks = <&clk IMX8MP_CLK_ECSPI1>;
- assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
- dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
+ #size-cells = <1>;
+ ranges;
- ecspi2: spi@30830000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx8mp-ecspi", "fsl,imx6ul-ecspi";
- reg = <0x30830000 0x10000>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MP_CLK_ECSPI2_ROOT>,
- <&clk IMX8MP_CLK_ECSPI2_ROOT>;
- clock-names = "ipg", "per";
- assigned-clock-rates = <80000000>;
- assigned-clocks = <&clk IMX8MP_CLK_ECSPI2>;
- assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
- dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
+ ecspi1: spi@30820000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx8mp-ecspi", "fsl,imx6ul-ecspi";
+ reg = <0x30820000 0x10000>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MP_CLK_ECSPI1_ROOT>,
+ <&clk IMX8MP_CLK_ECSPI1_ROOT>;
+ clock-names = "ipg", "per";
+ assigned-clock-rates = <80000000>;
+ assigned-clocks = <&clk IMX8MP_CLK_ECSPI1>;
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
+ dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
- ecspi3: spi@30840000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx8mp-ecspi", "fsl,imx6ul-ecspi";
- reg = <0x30840000 0x10000>;
- interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MP_CLK_ECSPI3_ROOT>,
- <&clk IMX8MP_CLK_ECSPI3_ROOT>;
- clock-names = "ipg", "per";
- assigned-clock-rates = <80000000>;
- assigned-clocks = <&clk IMX8MP_CLK_ECSPI3>;
- assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
- dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
+ ecspi2: spi@30830000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx8mp-ecspi", "fsl,imx6ul-ecspi";
+ reg = <0x30830000 0x10000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MP_CLK_ECSPI2_ROOT>,
+ <&clk IMX8MP_CLK_ECSPI2_ROOT>;
+ clock-names = "ipg", "per";
+ assigned-clock-rates = <80000000>;
+ assigned-clocks = <&clk IMX8MP_CLK_ECSPI2>;
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
+ dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
- uart1: serial@30860000 {
- compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart";
- reg = <0x30860000 0x10000>;
- interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MP_CLK_UART1_ROOT>,
- <&clk IMX8MP_CLK_UART1_ROOT>;
- clock-names = "ipg", "per";
- dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
+ ecspi3: spi@30840000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx8mp-ecspi", "fsl,imx6ul-ecspi";
+ reg = <0x30840000 0x10000>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MP_CLK_ECSPI3_ROOT>,
+ <&clk IMX8MP_CLK_ECSPI3_ROOT>;
+ clock-names = "ipg", "per";
+ assigned-clock-rates = <80000000>;
+ assigned-clocks = <&clk IMX8MP_CLK_ECSPI3>;
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
+ dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
- uart3: serial@30880000 {
- compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart";
- reg = <0x30880000 0x10000>;
- interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MP_CLK_UART3_ROOT>,
- <&clk IMX8MP_CLK_UART3_ROOT>;
- clock-names = "ipg", "per";
- dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
+ uart1: serial@30860000 {
+ compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart";
+ reg = <0x30860000 0x10000>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MP_CLK_UART1_ROOT>,
+ <&clk IMX8MP_CLK_UART1_ROOT>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
- uart2: serial@30890000 {
- compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart";
- reg = <0x30890000 0x10000>;
- interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MP_CLK_UART2_ROOT>,
- <&clk IMX8MP_CLK_UART2_ROOT>;
- clock-names = "ipg", "per";
- dmas = <&sdma1 24 4 0>, <&sdma1 25 4 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
+ uart3: serial@30880000 {
+ compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart";
+ reg = <0x30880000 0x10000>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MP_CLK_UART3_ROOT>,
+ <&clk IMX8MP_CLK_UART3_ROOT>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
- flexcan1: can@308c0000 {
- compatible = "fsl,imx8mp-flexcan";
- reg = <0x308c0000 0x10000>;
- interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
- <&clk IMX8MP_CLK_CAN1_ROOT>;
- clock-names = "ipg", "per";
- assigned-clocks = <&clk IMX8MP_CLK_CAN1>;
- assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_40M>;
- assigned-clock-rates = <40000000>;
- fsl,clk-source = /bits/ 8 <0>;
- fsl,stop-mode = <&gpr 0x10 4>;
- status = "disabled";
- };
+ uart2: serial@30890000 {
+ compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart";
+ reg = <0x30890000 0x10000>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MP_CLK_UART2_ROOT>,
+ <&clk IMX8MP_CLK_UART2_ROOT>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma1 24 4 0>, <&sdma1 25 4 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
- flexcan2: can@308d0000 {
- compatible = "fsl,imx8mp-flexcan";
- reg = <0x308d0000 0x10000>;
- interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
- <&clk IMX8MP_CLK_CAN2_ROOT>;
- clock-names = "ipg", "per";
- assigned-clocks = <&clk IMX8MP_CLK_CAN2>;
- assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_40M>;
- assigned-clock-rates = <40000000>;
- fsl,clk-source = /bits/ 8 <0>;
- fsl,stop-mode = <&gpr 0x10 5>;
- status = "disabled";
+ flexcan1: can@308c0000 {
+ compatible = "fsl,imx8mp-flexcan";
+ reg = <0x308c0000 0x10000>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
+ <&clk IMX8MP_CLK_CAN1_ROOT>;
+ clock-names = "ipg", "per";
+ assigned-clocks = <&clk IMX8MP_CLK_CAN1>;
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_40M>;
+ assigned-clock-rates = <40000000>;
+ fsl,clk-source = /bits/ 8 <0>;
+ fsl,stop-mode = <&gpr 0x10 4>;
+ status = "disabled";
+ };
+
+ flexcan2: can@308d0000 {
+ compatible = "fsl,imx8mp-flexcan";
+ reg = <0x308d0000 0x10000>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
+ <&clk IMX8MP_CLK_CAN2_ROOT>;
+ clock-names = "ipg", "per";
+ assigned-clocks = <&clk IMX8MP_CLK_CAN2>;
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_40M>;
+ assigned-clock-rates = <40000000>;
+ fsl,clk-source = /bits/ 8 <0>;
+ fsl,stop-mode = <&gpr 0x10 5>;
+ status = "disabled";
+ };
};
crypto: crypto@30900000 {
--
2.34.1
^ permalink raw reply related [flat|nested] 3+ messages in thread* Re: [PATCH] arm64: dts: imx8mp: Enable spba-bus on AIPS3
2022-12-18 17:05 [PATCH] arm64: dts: imx8mp: Enable spba-bus on AIPS3 Adam Ford
@ 2022-12-21 14:45 ` Marco Felsch
2023-01-01 4:47 ` Shawn Guo
1 sibling, 0 replies; 3+ messages in thread
From: Marco Felsch @ 2022-12-21 14:45 UTC (permalink / raw)
To: Adam Ford
Cc: linux-arm-kernel, marex, devicetree, Fabio Estevam,
Pengutronix Kernel Team, Sascha Hauer, aford, linux-kernel,
Rob Herring, NXP Linux Team, Krzysztof Kozlowski, Shawn Guo
Hi Adam,
On 22-12-18, Adam Ford wrote:
> There is an SPBA bus on AIPS3 which includes ecspi1-3,
> UART1-3, and Flexcan1-2 according to the TRM.
LGTM
> Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> index 2ce45e7cbbdf..9b0a47e7b8fd 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> @@ -719,121 +719,129 @@ aips3: bus@30800000 {
> #size-cells = <1>;
> ranges;
>
> - ecspi1: spi@30820000 {
> + spba-bus@30800000 {
> + compatible = "fsl,spba-bus", "simple-bus";
> + reg = <0x30800000 0x100000>;
> #address-cells = <1>;
> - #size-cells = <0>;
> - compatible = "fsl,imx8mp-ecspi", "fsl,imx6ul-ecspi";
> - reg = <0x30820000 0x10000>;
> - interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clk IMX8MP_CLK_ECSPI1_ROOT>,
> - <&clk IMX8MP_CLK_ECSPI1_ROOT>;
> - clock-names = "ipg", "per";
> - assigned-clock-rates = <80000000>;
> - assigned-clocks = <&clk IMX8MP_CLK_ECSPI1>;
> - assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
> - dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
> - dma-names = "rx", "tx";
> - status = "disabled";
> - };
> + #size-cells = <1>;
> + ranges;
>
> - ecspi2: spi@30830000 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - compatible = "fsl,imx8mp-ecspi", "fsl,imx6ul-ecspi";
> - reg = <0x30830000 0x10000>;
> - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clk IMX8MP_CLK_ECSPI2_ROOT>,
> - <&clk IMX8MP_CLK_ECSPI2_ROOT>;
> - clock-names = "ipg", "per";
> - assigned-clock-rates = <80000000>;
> - assigned-clocks = <&clk IMX8MP_CLK_ECSPI2>;
> - assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
> - dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
> - dma-names = "rx", "tx";
> - status = "disabled";
> - };
> + ecspi1: spi@30820000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "fsl,imx8mp-ecspi", "fsl,imx6ul-ecspi";
> + reg = <0x30820000 0x10000>;
> + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX8MP_CLK_ECSPI1_ROOT>,
> + <&clk IMX8MP_CLK_ECSPI1_ROOT>;
> + clock-names = "ipg", "per";
> + assigned-clock-rates = <80000000>;
> + assigned-clocks = <&clk IMX8MP_CLK_ECSPI1>;
> + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
> + dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
> + dma-names = "rx", "tx";
> + status = "disabled";
> + };
>
> - ecspi3: spi@30840000 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - compatible = "fsl,imx8mp-ecspi", "fsl,imx6ul-ecspi";
> - reg = <0x30840000 0x10000>;
> - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clk IMX8MP_CLK_ECSPI3_ROOT>,
> - <&clk IMX8MP_CLK_ECSPI3_ROOT>;
> - clock-names = "ipg", "per";
> - assigned-clock-rates = <80000000>;
> - assigned-clocks = <&clk IMX8MP_CLK_ECSPI3>;
> - assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
> - dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
> - dma-names = "rx", "tx";
> - status = "disabled";
> - };
> + ecspi2: spi@30830000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "fsl,imx8mp-ecspi", "fsl,imx6ul-ecspi";
> + reg = <0x30830000 0x10000>;
> + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX8MP_CLK_ECSPI2_ROOT>,
> + <&clk IMX8MP_CLK_ECSPI2_ROOT>;
> + clock-names = "ipg", "per";
> + assigned-clock-rates = <80000000>;
> + assigned-clocks = <&clk IMX8MP_CLK_ECSPI2>;
> + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
> + dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
> + dma-names = "rx", "tx";
> + status = "disabled";
> + };
>
> - uart1: serial@30860000 {
> - compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart";
> - reg = <0x30860000 0x10000>;
> - interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clk IMX8MP_CLK_UART1_ROOT>,
> - <&clk IMX8MP_CLK_UART1_ROOT>;
> - clock-names = "ipg", "per";
> - dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
> - dma-names = "rx", "tx";
> - status = "disabled";
> - };
> + ecspi3: spi@30840000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "fsl,imx8mp-ecspi", "fsl,imx6ul-ecspi";
> + reg = <0x30840000 0x10000>;
> + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX8MP_CLK_ECSPI3_ROOT>,
> + <&clk IMX8MP_CLK_ECSPI3_ROOT>;
> + clock-names = "ipg", "per";
> + assigned-clock-rates = <80000000>;
> + assigned-clocks = <&clk IMX8MP_CLK_ECSPI3>;
> + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
> + dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
> + dma-names = "rx", "tx";
> + status = "disabled";
> + };
>
> - uart3: serial@30880000 {
> - compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart";
> - reg = <0x30880000 0x10000>;
> - interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clk IMX8MP_CLK_UART3_ROOT>,
> - <&clk IMX8MP_CLK_UART3_ROOT>;
> - clock-names = "ipg", "per";
> - dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
> - dma-names = "rx", "tx";
> - status = "disabled";
> - };
> + uart1: serial@30860000 {
> + compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart";
> + reg = <0x30860000 0x10000>;
> + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX8MP_CLK_UART1_ROOT>,
> + <&clk IMX8MP_CLK_UART1_ROOT>;
> + clock-names = "ipg", "per";
> + dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
> + dma-names = "rx", "tx";
> + status = "disabled";
> + };
>
> - uart2: serial@30890000 {
> - compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart";
> - reg = <0x30890000 0x10000>;
> - interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clk IMX8MP_CLK_UART2_ROOT>,
> - <&clk IMX8MP_CLK_UART2_ROOT>;
> - clock-names = "ipg", "per";
> - dmas = <&sdma1 24 4 0>, <&sdma1 25 4 0>;
> - dma-names = "rx", "tx";
> - status = "disabled";
> - };
> + uart3: serial@30880000 {
> + compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart";
> + reg = <0x30880000 0x10000>;
> + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX8MP_CLK_UART3_ROOT>,
> + <&clk IMX8MP_CLK_UART3_ROOT>;
> + clock-names = "ipg", "per";
> + dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
> + dma-names = "rx", "tx";
> + status = "disabled";
> + };
>
> - flexcan1: can@308c0000 {
> - compatible = "fsl,imx8mp-flexcan";
> - reg = <0x308c0000 0x10000>;
> - interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
> - <&clk IMX8MP_CLK_CAN1_ROOT>;
> - clock-names = "ipg", "per";
> - assigned-clocks = <&clk IMX8MP_CLK_CAN1>;
> - assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_40M>;
> - assigned-clock-rates = <40000000>;
> - fsl,clk-source = /bits/ 8 <0>;
> - fsl,stop-mode = <&gpr 0x10 4>;
> - status = "disabled";
> - };
> + uart2: serial@30890000 {
> + compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart";
> + reg = <0x30890000 0x10000>;
> + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX8MP_CLK_UART2_ROOT>,
> + <&clk IMX8MP_CLK_UART2_ROOT>;
> + clock-names = "ipg", "per";
> + dmas = <&sdma1 24 4 0>, <&sdma1 25 4 0>;
> + dma-names = "rx", "tx";
> + status = "disabled";
> + };
>
> - flexcan2: can@308d0000 {
> - compatible = "fsl,imx8mp-flexcan";
> - reg = <0x308d0000 0x10000>;
> - interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
> - <&clk IMX8MP_CLK_CAN2_ROOT>;
> - clock-names = "ipg", "per";
> - assigned-clocks = <&clk IMX8MP_CLK_CAN2>;
> - assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_40M>;
> - assigned-clock-rates = <40000000>;
> - fsl,clk-source = /bits/ 8 <0>;
> - fsl,stop-mode = <&gpr 0x10 5>;
> - status = "disabled";
> + flexcan1: can@308c0000 {
> + compatible = "fsl,imx8mp-flexcan";
> + reg = <0x308c0000 0x10000>;
> + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
> + <&clk IMX8MP_CLK_CAN1_ROOT>;
> + clock-names = "ipg", "per";
> + assigned-clocks = <&clk IMX8MP_CLK_CAN1>;
> + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_40M>;
> + assigned-clock-rates = <40000000>;
> + fsl,clk-source = /bits/ 8 <0>;
> + fsl,stop-mode = <&gpr 0x10 4>;
> + status = "disabled";
> + };
> +
> + flexcan2: can@308d0000 {
> + compatible = "fsl,imx8mp-flexcan";
> + reg = <0x308d0000 0x10000>;
> + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
> + <&clk IMX8MP_CLK_CAN2_ROOT>;
> + clock-names = "ipg", "per";
> + assigned-clocks = <&clk IMX8MP_CLK_CAN2>;
> + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_40M>;
> + assigned-clock-rates = <40000000>;
> + fsl,clk-source = /bits/ 8 <0>;
> + fsl,stop-mode = <&gpr 0x10 5>;
> + status = "disabled";
> + };
> };
>
> crypto: crypto@30900000 {
> --
> 2.34.1
>
>
>
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH] arm64: dts: imx8mp: Enable spba-bus on AIPS3
2022-12-18 17:05 [PATCH] arm64: dts: imx8mp: Enable spba-bus on AIPS3 Adam Ford
2022-12-21 14:45 ` Marco Felsch
@ 2023-01-01 4:47 ` Shawn Guo
1 sibling, 0 replies; 3+ messages in thread
From: Shawn Guo @ 2023-01-01 4:47 UTC (permalink / raw)
To: Adam Ford
Cc: linux-arm-kernel, aford, marex, Rob Herring, Krzysztof Kozlowski,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
NXP Linux Team, devicetree, linux-kernel
On Sun, Dec 18, 2022 at 11:05:44AM -0600, Adam Ford wrote:
> There is an SPBA bus on AIPS3 which includes ecspi1-3,
> UART1-3, and Flexcan1-2 according to the TRM.
>
> Signed-off-by: Adam Ford <aford173@gmail.com>
Applied, thanks!
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2023-01-01 4:47 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2022-12-18 17:05 [PATCH] arm64: dts: imx8mp: Enable spba-bus on AIPS3 Adam Ford
2022-12-21 14:45 ` Marco Felsch
2023-01-01 4:47 ` Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox