From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: linux-serial@vger.kernel.org,
"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
"Jiri Slaby" <jirislaby@kernel.org>,
"Johan Hovold" <johan@kernel.org>,
"Samuel Iglesias Gonsálvez" <siglesias@igalia.com>,
"Rodolfo Giometti" <giometti@enneenne.com>,
"Arnd Bergmann" <arnd@arndb.de>,
"Jens Taprogge" <jens.taprogge@taprogge.org>,
"Heiko Carstens" <hca@linux.ibm.com>,
"Vasily Gorbik" <gor@linux.ibm.com>,
"Alexander Gordeev" <agordeev@linux.ibm.com>,
"Christian Borntraeger" <borntraeger@linux.ibm.com>,
"Sven Schnelle" <svens@linux.ibm.com>,
"Shawn Guo" <shawnguo@kernel.org>,
"Sascha Hauer" <s.hauer@pengutronix.de>,
"Pengutronix Kernel Team" <kernel@pengutronix.de>,
"Fabio Estevam" <festevam@gmail.com>,
"NXP Linux Team" <linux-imx@nxp.com>,
linux-kernel@vger.kernel.org,
industrypack-devel@lists.sourceforge.net,
linux-s390@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-usb@vger.kernel.org
Cc: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Subject: [PATCH v2 01/13] tty: Cleanup tty_port_set_initialized() bool parameter
Date: Tue, 10 Jan 2023 14:02:14 +0200 [thread overview]
Message-ID: <20230110120226.14972-2-ilpo.jarvinen@linux.intel.com> (raw)
In-Reply-To: <20230110120226.14972-1-ilpo.jarvinen@linux.intel.com>
Make callers pass true/false consistently for bool val.
Reviewed-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
drivers/char/pcmcia/synclink_cs.c | 4 ++--
drivers/ipack/devices/ipoctal.c | 4 ++--
drivers/s390/char/con3215.c | 4 ++--
drivers/tty/amiserial.c | 4 ++--
drivers/tty/moxa.c | 2 +-
drivers/tty/mxser.c | 2 +-
drivers/tty/n_gsm.c | 4 ++--
drivers/tty/serial/serial_core.c | 6 +++---
drivers/tty/synclink_gt.c | 4 ++--
drivers/tty/tty_port.c | 4 ++--
drivers/usb/serial/console.c | 2 +-
11 files changed, 20 insertions(+), 20 deletions(-)
diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index b2735be81ab2..baa46e8a094b 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -1309,7 +1309,7 @@ static int startup(MGSLPC_INFO * info, struct tty_struct *tty)
if (tty)
clear_bit(TTY_IO_ERROR, &tty->flags);
- tty_port_set_initialized(&info->port, 1);
+ tty_port_set_initialized(&info->port, true);
return 0;
}
@@ -1359,7 +1359,7 @@ static void shutdown(MGSLPC_INFO * info, struct tty_struct *tty)
if (tty)
set_bit(TTY_IO_ERROR, &tty->flags);
- tty_port_set_initialized(&info->port, 0);
+ tty_port_set_initialized(&info->port, false);
}
static void mgslpc_program_hw(MGSLPC_INFO *info, struct tty_struct *tty)
diff --git a/drivers/ipack/devices/ipoctal.c b/drivers/ipack/devices/ipoctal.c
index fc00274070b6..103fce0c49e6 100644
--- a/drivers/ipack/devices/ipoctal.c
+++ b/drivers/ipack/devices/ipoctal.c
@@ -647,7 +647,7 @@ static void ipoctal_hangup(struct tty_struct *tty)
tty_port_hangup(&channel->tty_port);
ipoctal_reset_channel(channel);
- tty_port_set_initialized(&channel->tty_port, 0);
+ tty_port_set_initialized(&channel->tty_port, false);
wake_up_interruptible(&channel->tty_port.open_wait);
}
@@ -659,7 +659,7 @@ static void ipoctal_shutdown(struct tty_struct *tty)
return;
ipoctal_reset_channel(channel);
- tty_port_set_initialized(&channel->tty_port, 0);
+ tty_port_set_initialized(&channel->tty_port, false);
}
static void ipoctal_cleanup(struct tty_struct *tty)
diff --git a/drivers/s390/char/con3215.c b/drivers/s390/char/con3215.c
index 72ba83c1bc79..0b05cd76b7d0 100644
--- a/drivers/s390/char/con3215.c
+++ b/drivers/s390/char/con3215.c
@@ -629,7 +629,7 @@ static int raw3215_startup(struct raw3215_info *raw)
if (tty_port_initialized(&raw->port))
return 0;
raw->line_pos = 0;
- tty_port_set_initialized(&raw->port, 1);
+ tty_port_set_initialized(&raw->port, true);
spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags);
raw3215_try_io(raw);
spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags);
@@ -659,7 +659,7 @@ static void raw3215_shutdown(struct raw3215_info *raw)
spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags);
remove_wait_queue(&raw->empty_wait, &wait);
set_current_state(TASK_RUNNING);
- tty_port_set_initialized(&raw->port, 1);
+ tty_port_set_initialized(&raw->port, true);
}
spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags);
}
diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c
index f52266766df9..f8cdce1626cb 100644
--- a/drivers/tty/amiserial.c
+++ b/drivers/tty/amiserial.c
@@ -502,7 +502,7 @@ static int startup(struct tty_struct *tty, struct serial_state *info)
*/
change_speed(tty, info, NULL);
- tty_port_set_initialized(port, 1);
+ tty_port_set_initialized(port, true);
local_irq_restore(flags);
return 0;
@@ -556,7 +556,7 @@ static void shutdown(struct tty_struct *tty, struct serial_state *info)
set_bit(TTY_IO_ERROR, &tty->flags);
- tty_port_set_initialized(&info->tport, 0);
+ tty_port_set_initialized(&info->tport, false);
local_irq_restore(flags);
}
diff --git a/drivers/tty/moxa.c b/drivers/tty/moxa.c
index 35b6fddf0341..bc474f3c3f8f 100644
--- a/drivers/tty/moxa.c
+++ b/drivers/tty/moxa.c
@@ -1484,7 +1484,7 @@ static int moxa_open(struct tty_struct *tty, struct file *filp)
MoxaPortLineCtrl(ch, 1, 1);
MoxaPortEnable(ch);
MoxaSetFifo(ch, ch->type == PORT_16550A);
- tty_port_set_initialized(&ch->port, 1);
+ tty_port_set_initialized(&ch->port, true);
}
mutex_unlock(&ch->port.mutex);
mutex_unlock(&moxa_openlock);
diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c
index 2436e0b10f9a..2926a831727d 100644
--- a/drivers/tty/mxser.c
+++ b/drivers/tty/mxser.c
@@ -1063,7 +1063,7 @@ static int mxser_set_serial_info(struct tty_struct *tty,
} else {
retval = mxser_activate(port, tty);
if (retval == 0)
- tty_port_set_initialized(port, 1);
+ tty_port_set_initialized(port, true);
}
mutex_unlock(&port->mutex);
return retval;
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index daf12132deb1..631539c17d85 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -2059,7 +2059,7 @@ static void gsm_dlci_close(struct gsm_dlci *dlci)
tty_port_tty_hangup(&dlci->port, false);
gsm_dlci_clear_queues(dlci->gsm, dlci);
/* Ensure that gsmtty_open() can return. */
- tty_port_set_initialized(&dlci->port, 0);
+ tty_port_set_initialized(&dlci->port, false);
wake_up_interruptible(&dlci->port.open_wait);
} else
dlci->gsm->dead = true;
@@ -3880,7 +3880,7 @@ static int gsmtty_open(struct tty_struct *tty, struct file *filp)
dlci->modem_rx = 0;
/* We could in theory open and close before we wait - eg if we get
a DM straight back. This is ok as that will have caused a hangup */
- tty_port_set_initialized(port, 1);
+ tty_port_set_initialized(port, true);
/* Start sending off SABM messages */
if (gsm->initiator)
gsm_dlci_begin_open(dlci);
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index b9fbbee598b8..e049c760b738 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -290,7 +290,7 @@ static void uart_shutdown(struct tty_struct *tty, struct uart_state *state)
set_bit(TTY_IO_ERROR, &tty->flags);
if (tty_port_initialized(port)) {
- tty_port_set_initialized(port, 0);
+ tty_port_set_initialized(port, false);
/*
* Turn off DTR and RTS early.
@@ -2347,7 +2347,7 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport)
unsigned int mctrl;
tty_port_set_suspended(port, 1);
- tty_port_set_initialized(port, 0);
+ tty_port_set_initialized(port, false);
spin_lock_irq(&uport->lock);
ops->stop_tx(uport);
@@ -2458,7 +2458,7 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
uart_rs485_config(uport);
ops->start_tx(uport);
spin_unlock_irq(&uport->lock);
- tty_port_set_initialized(port, 1);
+ tty_port_set_initialized(port, true);
} else {
/*
* Failed to resume - maybe hardware went away?
diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c
index 72b76cdde534..2b96bf0ecafb 100644
--- a/drivers/tty/synclink_gt.c
+++ b/drivers/tty/synclink_gt.c
@@ -2354,7 +2354,7 @@ static int startup(struct slgt_info *info)
if (info->port.tty)
clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
- tty_port_set_initialized(&info->port, 1);
+ tty_port_set_initialized(&info->port, true);
return 0;
}
@@ -2401,7 +2401,7 @@ static void shutdown(struct slgt_info *info)
if (info->port.tty)
set_bit(TTY_IO_ERROR, &info->port.tty->flags);
- tty_port_set_initialized(&info->port, 0);
+ tty_port_set_initialized(&info->port, false);
}
static void program_hw(struct slgt_info *info)
diff --git a/drivers/tty/tty_port.c b/drivers/tty/tty_port.c
index dce08a6d7b5e..0c00d5bd6c88 100644
--- a/drivers/tty/tty_port.c
+++ b/drivers/tty/tty_port.c
@@ -367,7 +367,7 @@ static void tty_port_shutdown(struct tty_port *port, struct tty_struct *tty)
goto out;
if (tty_port_initialized(port)) {
- tty_port_set_initialized(port, 0);
+ tty_port_set_initialized(port, false);
/*
* Drop DTR/RTS if HUPCL is set. This causes any attached
* modem to hang up the line.
@@ -788,7 +788,7 @@ int tty_port_open(struct tty_port *port, struct tty_struct *tty,
return retval;
}
}
- tty_port_set_initialized(port, 1);
+ tty_port_set_initialized(port, true);
}
mutex_unlock(&port->mutex);
return tty_port_block_til_ready(port, tty, filp);
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index da19a5fa414f..c3ea3a46ed76 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -169,7 +169,7 @@ static int usb_console_setup(struct console *co, char *options)
tty_save_termios(tty);
tty_kref_put(tty);
}
- tty_port_set_initialized(&port->port, 1);
+ tty_port_set_initialized(&port->port, true);
}
/* Now that any required fake tty operations are completed restore
* the tty port count */
--
2.30.2
next prev parent reply other threads:[~2023-01-10 12:03 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-10 12:02 [PATCH v2 00/13] tty/serial: bool conversions and cleanups Ilpo Järvinen
2023-01-10 12:02 ` Ilpo Järvinen [this message]
2023-01-10 12:02 ` [PATCH v2 02/13] tty: Cleamup tty_port_set_suspended() bool parameter Ilpo Järvinen
2023-01-10 12:02 ` [PATCH v2 03/13] tty: Cleanup tty_port_set_active() " Ilpo Järvinen
2023-01-10 12:02 ` [PATCH v2 04/13] tty: moxa: Make local var storing tty_port_initialized() bool Ilpo Järvinen
2023-01-10 12:02 ` [PATCH v2 05/13] serial: Convert uart_{,port_}startup() init_hw param to bool Ilpo Järvinen
2023-01-11 5:53 ` Jiri Slaby
2023-01-10 12:02 ` [PATCH v2 06/13] tty: Convert ->carrier_raised() and callchains " Ilpo Järvinen
2023-01-10 12:02 ` [PATCH v2 07/13] tty: Convert ->dtr_rts() to take bool argument Ilpo Järvinen
2023-01-10 12:02 ` [PATCH v2 08/13] tty/serial: Make ->dcd_change()+uart_handle_dcd_change() status bool active Ilpo Järvinen
2023-01-10 12:02 ` [PATCH v2 09/13] serial: Make uart_handle_cts_change() status param " Ilpo Järvinen
2023-01-11 5:54 ` Jiri Slaby
2023-01-10 12:02 ` [PATCH v2 10/13] tty: Return bool from tty_termios_hw_change() Ilpo Järvinen
2023-01-11 5:55 ` Jiri Slaby
2023-01-10 12:02 ` [PATCH v2 11/13] tty/serial: Call ->dtr_rts() parameter active consistently Ilpo Järvinen
2023-01-11 5:56 ` Jiri Slaby
2023-01-10 12:02 ` [PATCH v2 12/13] tty: moxa: Rename dtr/rts parameters/variables to active Ilpo Järvinen
2023-01-11 5:59 ` Jiri Slaby
2023-01-10 12:02 ` [PATCH v2 13/13] usb/serial: " Ilpo Järvinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230110120226.14972-2-ilpo.jarvinen@linux.intel.com \
--to=ilpo.jarvinen@linux.intel.com \
--cc=agordeev@linux.ibm.com \
--cc=arnd@arndb.de \
--cc=borntraeger@linux.ibm.com \
--cc=festevam@gmail.com \
--cc=giometti@enneenne.com \
--cc=gor@linux.ibm.com \
--cc=gregkh@linuxfoundation.org \
--cc=hca@linux.ibm.com \
--cc=industrypack-devel@lists.sourceforge.net \
--cc=jens.taprogge@taprogge.org \
--cc=jirislaby@kernel.org \
--cc=johan@kernel.org \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-s390@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=siglesias@igalia.com \
--cc=svens@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox