The Linux Kernel Mailing List
 help / color / mirror / Atom feed
From: Hector Martin <marcan@marcan.st>
To: Mark Brown <broonie@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Tudor Ambarus <tudor.ambarus@microchip.com>,
	linux-spi@vger.kernel.org, devicetree@vger.kernel.org,
	Janne Grunau <j@jannau.net>,
	Alyssa Rosenzweig <alyssa@rosenzweig.io>,
	asahi@lists.linux.dev, linux-kernel@vger.kernel.org,
	Hector Martin <marcan@marcan.st>
Subject: [PATCH v2 1/3] spi: Use a 32-bit DT property for spi-cs-setup-delay-ns
Date: Fri, 13 Jan 2023 19:23:08 +0900	[thread overview]
Message-ID: <20230113102309.18308-2-marcan@marcan.st> (raw)
In-Reply-To: <20230113102309.18308-1-marcan@marcan.st>

From: Janne Grunau <j@jannau.net>

65us is not a reasonable maximum for this property, as some devices
might need a much longer setup time (e.g. those driven by firmware on
the other end). Plus, device tree property values are in 32-bit cells
and smaller widths should not be used without good reason.

Also move the logic to a helper function, since this will later be used
to parse other CS delay properties too.

Fixes: 33a2fde5f77b ("spi: Introduce spi-cs-setup-ns property")
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Hector Martin <marcan@marcan.st>
---
 drivers/spi/spi.c | 23 ++++++++++++++++++-----
 1 file changed, 18 insertions(+), 5 deletions(-)

diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 15f174f4e056..3f33934f5429 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -2220,11 +2220,26 @@ void spi_flush_queue(struct spi_controller *ctlr)
 /*-------------------------------------------------------------------------*/
 
 #if defined(CONFIG_OF)
+static void of_spi_parse_dt_cs_delay(struct device_node *nc,
+				     struct spi_delay *delay, const char *prop)
+{
+	u32 value;
+
+	if (!of_property_read_u32(nc, prop, &value)) {
+		if (value > U16_MAX) {
+			delay->value = DIV_ROUND_UP(value, 1000);
+			delay->unit = SPI_DELAY_UNIT_USECS;
+		} else {
+			delay->value = value;
+			delay->unit = SPI_DELAY_UNIT_NSECS;
+		}
+	}
+}
+
 static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi,
 			   struct device_node *nc)
 {
 	u32 value;
-	u16 cs_setup;
 	int rc;
 
 	/* Mode (clock phase/polarity/etc.) */
@@ -2310,10 +2325,8 @@ static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi,
 	if (!of_property_read_u32(nc, "spi-max-frequency", &value))
 		spi->max_speed_hz = value;
 
-	if (!of_property_read_u16(nc, "spi-cs-setup-delay-ns", &cs_setup)) {
-		spi->cs_setup.value = cs_setup;
-		spi->cs_setup.unit = SPI_DELAY_UNIT_NSECS;
-	}
+	/* Device CS delays */
+	of_spi_parse_dt_cs_delay(nc, &spi->cs_setup, "spi-cs-setup-delay-ns");
 
 	return 0;
 }
-- 
2.35.1


  reply	other threads:[~2023-01-13 10:24 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-13 10:23 [PATCH v2 0/3] SPI core CS delay fixes and additions Hector Martin
2023-01-13 10:23 ` Hector Martin [this message]
2023-01-13 10:23 ` [PATCH v2 2/3] spi: dt-bindings: Add hold/inactive CS delay peripheral properties Hector Martin
2023-01-13 10:23 ` [PATCH v2 3/3] spi: Parse hold/inactive CS delay values from the DT Hector Martin
2023-01-13 15:57 ` [PATCH v2 0/3] SPI core CS delay fixes and additions Mark Brown
2023-02-14 18:52   ` Kazuki
2023-02-16  9:04     ` Janne Grunau
2023-02-16 15:55       ` Mark Brown
2023-02-16 16:21         ` Janne Grunau
2023-02-16 16:25           ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230113102309.18308-2-marcan@marcan.st \
    --to=marcan@marcan.st \
    --cc=alyssa@rosenzweig.io \
    --cc=asahi@lists.linux.dev \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=j@jannau.net \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=tudor.ambarus@microchip.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox