From: Jerry Ray <jerry.ray@microchip.com>
To: Andrew Lunn <andrew@lunn.ch>,
Florian Fainelli <f.fainelli@gmail.com>,
Vladimir Oltean <olteanv@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>,
"Paolo Abeni" <pabeni@redhat.com>,
Russell King <linux@armlinux.org.uk>, <jbe@pengutronix.de>,
<netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Jerry Ray <jerry.ray@microchip.com>
Subject: [net-next: PATCH v7 1/7] dsa: lan9303: align dsa_switch_ops members
Date: Tue, 17 Jan 2023 14:56:57 -0600 [thread overview]
Message-ID: <20230117205703.25960-2-jerry.ray@microchip.com> (raw)
In-Reply-To: <20230117205703.25960-1-jerry.ray@microchip.com>
Whitespace preparatory patch, making the dsa_switch_ops table consistent.
No code is added or removed.
Signed-off-by: Jerry Ray <jerry.ray@microchip.com>
---
drivers/net/dsa/lan9303-core.c | 38 +++++++++++++++++-----------------
1 file changed, 19 insertions(+), 19 deletions(-)
diff --git a/drivers/net/dsa/lan9303-core.c b/drivers/net/dsa/lan9303-core.c
index 2e270b479143..f8f6f79052e3 100644
--- a/drivers/net/dsa/lan9303-core.c
+++ b/drivers/net/dsa/lan9303-core.c
@@ -1282,25 +1282,25 @@ static int lan9303_port_mdb_del(struct dsa_switch *ds, int port,
}
static const struct dsa_switch_ops lan9303_switch_ops = {
- .get_tag_protocol = lan9303_get_tag_protocol,
- .setup = lan9303_setup,
- .get_strings = lan9303_get_strings,
- .phy_read = lan9303_phy_read,
- .phy_write = lan9303_phy_write,
- .adjust_link = lan9303_adjust_link,
- .get_ethtool_stats = lan9303_get_ethtool_stats,
- .get_sset_count = lan9303_get_sset_count,
- .port_enable = lan9303_port_enable,
- .port_disable = lan9303_port_disable,
- .port_bridge_join = lan9303_port_bridge_join,
- .port_bridge_leave = lan9303_port_bridge_leave,
- .port_stp_state_set = lan9303_port_stp_state_set,
- .port_fast_age = lan9303_port_fast_age,
- .port_fdb_add = lan9303_port_fdb_add,
- .port_fdb_del = lan9303_port_fdb_del,
- .port_fdb_dump = lan9303_port_fdb_dump,
- .port_mdb_add = lan9303_port_mdb_add,
- .port_mdb_del = lan9303_port_mdb_del,
+ .get_tag_protocol = lan9303_get_tag_protocol,
+ .setup = lan9303_setup,
+ .get_strings = lan9303_get_strings,
+ .phy_read = lan9303_phy_read,
+ .phy_write = lan9303_phy_write,
+ .adjust_link = lan9303_adjust_link,
+ .get_ethtool_stats = lan9303_get_ethtool_stats,
+ .get_sset_count = lan9303_get_sset_count,
+ .port_enable = lan9303_port_enable,
+ .port_disable = lan9303_port_disable,
+ .port_bridge_join = lan9303_port_bridge_join,
+ .port_bridge_leave = lan9303_port_bridge_leave,
+ .port_stp_state_set = lan9303_port_stp_state_set,
+ .port_fast_age = lan9303_port_fast_age,
+ .port_fdb_add = lan9303_port_fdb_add,
+ .port_fdb_del = lan9303_port_fdb_del,
+ .port_fdb_dump = lan9303_port_fdb_dump,
+ .port_mdb_add = lan9303_port_mdb_add,
+ .port_mdb_del = lan9303_port_mdb_del,
};
static int lan9303_register_switch(struct lan9303 *chip)
--
2.17.1
next prev parent reply other threads:[~2023-01-17 23:32 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-17 20:56 [net-next: PATCH v7 0/7] dsa: lan9303: Move to PHYLINK Jerry Ray
2023-01-17 20:56 ` Jerry Ray [this message]
2023-01-17 20:56 ` [net-next: PATCH v7 2/7] dsa: lan9303: move Turbo Mode bit init Jerry Ray
2023-01-17 20:56 ` [net-next: PATCH v7 3/7] dsa: lan9303: Add exception logic for read failure Jerry Ray
2023-01-17 20:57 ` [net-next: PATCH v7 4/7] dsa: lan9303: write reg only if necessary Jerry Ray
2023-01-17 20:57 ` [net-next: PATCH v7 5/7] dsa: lan9303: Port 0 is xMII port Jerry Ray
2023-01-17 20:57 ` [net-next: PATCH v7 6/7] dsa: lan9303: Migrate to PHYLINK Jerry Ray
2023-01-17 20:57 ` [net-next: PATCH v7 7/7] dsa: lan9303: Add flow ctrl in link_up Jerry Ray
2023-01-20 9:00 ` [net-next: PATCH v7 0/7] dsa: lan9303: Move to PHYLINK patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230117205703.25960-2-jerry.ray@microchip.com \
--to=jerry.ray@microchip.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=f.fainelli@gmail.com \
--cc=jbe@pengutronix.de \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox