[PATCH v2 2/2] dt-bindings: opp: opp-v2-kryo-cpu: enlarge opp-supported-hw maximum

[Christian Marangi <ansuelsmth@gmail.com>]

Enlarge opp-supported-hw maximum value. In recent SoC we started
matching more bit and we currently match mask of 112. The old maximum of
7 was good for old SoC that didn't had complex id, but now this is
limiting and we need to enlarge it to support more variants.

Document all the various mask that can be used and limit them to only
reasonable values instead of using a generic maximum limit.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 .../bindings/opp/opp-v2-kryo-cpu.yaml         | 20 +++++++++++++++++--
 1 file changed, 18 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml b/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml
index b4947b326773..908cb0d7695a 100644
--- a/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml
+++ b/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml
@@ -50,12 +50,28 @@ patternProperties:
       opp-supported-hw:
         description: |
           A single 32 bit bitmap value, representing compatible HW.
-          Bitmap:
+          Bitmap for MSM8996 format:
           0:  MSM8996, speedbin 0
           1:  MSM8996, speedbin 1
           2:  MSM8996, speedbin 2
           3-31:  unused
-        maximum: 0x7
+
+          Bitmap for MSM8996 later revision format:
+          0:  MSM8996, speedbin 0
+          1:  MSM8996, speedbin 1
+          2:  MSM8996, speedbin 2
+          3:  always set
+          4-31:  unused
+
+          Bitmap for MSM8996SG format (speedbin shifted of 4 left):
+          0-3:  unused
+          4:  MSM8996SG, speedbin 0
+          5:  MSM8996SG, speedbin 1
+          6:  MSM8996SG, speedbin 2
+          7-31:  unused
+        enum: [0x1, 0x2, 0x3, 0x4, 0x7,
+               0x9, 0xd, 0xe, 0xf,
+               0x10, 0x20, 0x30, 0x70]
 
       clock-latency-ns: true
 
-- 
2.38.1