From: Stefan Binding <sbinding@opensource.cirrus.com>
To: Vinod Koul <vkoul@kernel.org>,
Bard Liao <yung-chuan.liao@linux.intel.com>,
Mark Brown <broonie@kernel.org>,
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: <alsa-devel@alsa-project.org>, <linux-kernel@vger.kernel.org>,
<patches@opensource.cirrus.com>,
Richard Fitzgerald <rf@opensource.cirrus.com>,
Stefan Binding <sbinding@opensource.cirrus.com>
Subject: [PATCH v3 2/8] ASoC: cs42l42: Add SOFT_RESET_REBOOT register
Date: Fri, 27 Jan 2023 16:51:05 +0000 [thread overview]
Message-ID: <20230127165111.3010960-3-sbinding@opensource.cirrus.com> (raw)
In-Reply-To: <20230127165111.3010960-1-sbinding@opensource.cirrus.com>
From: Richard Fitzgerald <rf@opensource.cirrus.com>
The SOFT_RESET_REBOOT register is needed to recover CS42L42 state after
a Soundwire bus reset.
This is required to be set whenever there is severe/hard bus reset.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
---
include/sound/cs42l42.h | 5 +++++
sound/soc/codecs/cs42l42.c | 2 ++
2 files changed, 7 insertions(+)
diff --git a/include/sound/cs42l42.h b/include/sound/cs42l42.h
index 1d1c24fdd0cae..3994e933db195 100644
--- a/include/sound/cs42l42.h
+++ b/include/sound/cs42l42.h
@@ -34,6 +34,7 @@
#define CS42L42_PAGE_24 0x2400
#define CS42L42_PAGE_25 0x2500
#define CS42L42_PAGE_26 0x2600
+#define CS42L42_PAGE_27 0x2700
#define CS42L42_PAGE_28 0x2800
#define CS42L42_PAGE_29 0x2900
#define CS42L42_PAGE_2A 0x2A00
@@ -720,6 +721,10 @@
#define CS42L42_SRC_SDOUT_FS (CS42L42_PAGE_26 + 0x09)
+/* Page 0x27 DMA */
+#define CS42L42_SOFT_RESET_REBOOT (CS42L42_PAGE_27 + 0x01)
+#define CS42L42_SFT_RST_REBOOT_MASK BIT(1)
+
/* Page 0x28 S/PDIF Registers */
#define CS42L42_SPDIF_CTL1 (CS42L42_PAGE_28 + 0x01)
#define CS42L42_SPDIF_CTL2 (CS42L42_PAGE_28 + 0x02)
diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c
index 2fefbcf7bd130..82aa11d6937be 100644
--- a/sound/soc/codecs/cs42l42.c
+++ b/sound/soc/codecs/cs42l42.c
@@ -293,6 +293,7 @@ bool cs42l42_readable_register(struct device *dev, unsigned int reg)
case CS42L42_SPDIF_SW_CTL1:
case CS42L42_SRC_SDIN_FS:
case CS42L42_SRC_SDOUT_FS:
+ case CS42L42_SOFT_RESET_REBOOT:
case CS42L42_SPDIF_CTL1:
case CS42L42_SPDIF_CTL2:
case CS42L42_SPDIF_CTL3:
@@ -358,6 +359,7 @@ bool cs42l42_volatile_register(struct device *dev, unsigned int reg)
case CS42L42_LOAD_DET_DONE:
case CS42L42_DET_STATUS1:
case CS42L42_DET_STATUS2:
+ case CS42L42_SOFT_RESET_REBOOT:
return true;
default:
return false;
--
2.34.1
next prev parent reply other threads:[~2023-01-27 16:51 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-27 16:51 [PATCH v3 0/8] ASoC: cs42l42: Add SoundWire support Stefan Binding
2023-01-27 16:51 ` [PATCH v3 1/8] soundwire: stream: Add specific prep/deprep commands to port_prep callback Stefan Binding
2023-01-31 11:02 ` Vinod Koul
2023-01-27 16:51 ` Stefan Binding [this message]
2023-01-30 16:32 ` [PATCH v3 2/8] ASoC: cs42l42: Add SOFT_RESET_REBOOT register Pierre-Louis Bossart
2023-01-27 16:51 ` [PATCH v3 3/8] ASoC: cs42l42: Ensure MCLKint is a multiple of the sample rate Stefan Binding
2023-01-27 16:51 ` [PATCH v3 4/8] ASoC: cs42l42: Separate ASP config from PLL config Stefan Binding
2023-01-30 16:33 ` Pierre-Louis Bossart
2023-01-27 16:51 ` [PATCH v3 5/8] ASoC: cs42l42: Export some functions for SoundWire Stefan Binding
2023-01-30 16:33 ` Pierre-Louis Bossart
2023-01-27 16:51 ` [PATCH v3 6/8] ASoC: cs42l42: Add SoundWire support Stefan Binding
2023-01-30 16:39 ` Pierre-Louis Bossart
2023-01-31 10:59 ` Richard Fitzgerald
2023-01-27 16:51 ` [PATCH v3 7/8] ASoC: cs42l42: Don't set idle_bias_on Stefan Binding
2023-01-30 16:40 ` Pierre-Louis Bossart
2023-01-27 16:51 ` [PATCH v3 8/8] ASoC: cs42l42: Wait for debounce interval after resume Stefan Binding
2023-01-30 16:45 ` Pierre-Louis Bossart
2023-01-31 11:03 ` Richard Fitzgerald
2023-01-31 15:52 ` Pierre-Louis Bossart
2023-01-31 22:18 ` [PATCH v3 0/8] ASoC: cs42l42: Add SoundWire support Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230127165111.3010960-3-sbinding@opensource.cirrus.com \
--to=sbinding@opensource.cirrus.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@opensource.cirrus.com \
--cc=pierre-louis.bossart@linux.intel.com \
--cc=rf@opensource.cirrus.com \
--cc=vkoul@kernel.org \
--cc=yung-chuan.liao@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox