From: Stefan Binding <sbinding@opensource.cirrus.com>
To: Vinod Koul <vkoul@kernel.org>,
Bard Liao <yung-chuan.liao@linux.intel.com>,
Mark Brown <broonie@kernel.org>,
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: <alsa-devel@alsa-project.org>, <linux-kernel@vger.kernel.org>,
<patches@opensource.cirrus.com>,
Richard Fitzgerald <rf@opensource.cirrus.com>,
Stefan Binding <sbinding@opensource.cirrus.com>
Subject: [PATCH v3 3/8] ASoC: cs42l42: Ensure MCLKint is a multiple of the sample rate
Date: Fri, 27 Jan 2023 16:51:06 +0000 [thread overview]
Message-ID: <20230127165111.3010960-4-sbinding@opensource.cirrus.com> (raw)
In-Reply-To: <20230127165111.3010960-1-sbinding@opensource.cirrus.com>
From: Richard Fitzgerald <rf@opensource.cirrus.com>
The chosen clocking configuration must give an internal MCLK (MCLKint)
that is an integer multiple of the sample rate.
On I2S each of the supported bit clock frequencies can only be generated
from one sample rate group (either the 44100 or the 48000) so the code
could use only the bitclock to look up a PLL config.
The relationship between sample rate and bitclock frequency is more
complex on Soundwire and so it is possible to set a frame shape to
generate a bitclock from the "wrong" group. For example 2*147 with a
48000 sample rate would give a bitclock of 14112000 which on I2S
could only be derived from a 44100 sample rate.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
---
sound/soc/codecs/cs42l42.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c
index 82aa11d6937be..939f8bcc222c0 100644
--- a/sound/soc/codecs/cs42l42.c
+++ b/sound/soc/codecs/cs42l42.c
@@ -653,7 +653,8 @@ static const struct cs42l42_pll_params pll_ratio_table[] = {
{ 24576000, 1, 0x03, 0x40, 0x000000, 0x03, 0x10, 12288000, 128, 1}
};
-static int cs42l42_pll_config(struct snd_soc_component *component, unsigned int clk)
+static int cs42l42_pll_config(struct snd_soc_component *component, unsigned int clk,
+ unsigned int sample_rate)
{
struct cs42l42_private *cs42l42 = snd_soc_component_get_drvdata(component);
int i;
@@ -668,6 +669,10 @@ static int cs42l42_pll_config(struct snd_soc_component *component, unsigned int
}
for (i = 0; i < ARRAY_SIZE(pll_ratio_table); i++) {
+ /* MCLKint must be a multiple of the sample rate */
+ if (pll_ratio_table[i].mclk_int % sample_rate)
+ continue;
+
if (pll_ratio_table[i].sclk == clk) {
cs42l42->pll_config = i;
@@ -893,6 +898,7 @@ static int cs42l42_pcm_hw_params(struct snd_pcm_substream *substream,
struct cs42l42_private *cs42l42 = snd_soc_component_get_drvdata(component);
unsigned int channels = params_channels(params);
unsigned int width = (params_width(params) / 8) - 1;
+ unsigned int sample_rate = params_rate(params);
unsigned int slot_width = 0;
unsigned int val = 0;
unsigned int bclk;
@@ -956,11 +962,11 @@ static int cs42l42_pcm_hw_params(struct snd_pcm_substream *substream,
break;
}
- ret = cs42l42_pll_config(component, bclk);
+ ret = cs42l42_pll_config(component, bclk, sample_rate);
if (ret)
return ret;
- cs42l42_src_config(component, params_rate(params));
+ cs42l42_src_config(component, sample_rate);
return 0;
}
--
2.34.1
next prev parent reply other threads:[~2023-01-27 16:51 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-27 16:51 [PATCH v3 0/8] ASoC: cs42l42: Add SoundWire support Stefan Binding
2023-01-27 16:51 ` [PATCH v3 1/8] soundwire: stream: Add specific prep/deprep commands to port_prep callback Stefan Binding
2023-01-31 11:02 ` Vinod Koul
2023-01-27 16:51 ` [PATCH v3 2/8] ASoC: cs42l42: Add SOFT_RESET_REBOOT register Stefan Binding
2023-01-30 16:32 ` Pierre-Louis Bossart
2023-01-27 16:51 ` Stefan Binding [this message]
2023-01-27 16:51 ` [PATCH v3 4/8] ASoC: cs42l42: Separate ASP config from PLL config Stefan Binding
2023-01-30 16:33 ` Pierre-Louis Bossart
2023-01-27 16:51 ` [PATCH v3 5/8] ASoC: cs42l42: Export some functions for SoundWire Stefan Binding
2023-01-30 16:33 ` Pierre-Louis Bossart
2023-01-27 16:51 ` [PATCH v3 6/8] ASoC: cs42l42: Add SoundWire support Stefan Binding
2023-01-30 16:39 ` Pierre-Louis Bossart
2023-01-31 10:59 ` Richard Fitzgerald
2023-01-27 16:51 ` [PATCH v3 7/8] ASoC: cs42l42: Don't set idle_bias_on Stefan Binding
2023-01-30 16:40 ` Pierre-Louis Bossart
2023-01-27 16:51 ` [PATCH v3 8/8] ASoC: cs42l42: Wait for debounce interval after resume Stefan Binding
2023-01-30 16:45 ` Pierre-Louis Bossart
2023-01-31 11:03 ` Richard Fitzgerald
2023-01-31 15:52 ` Pierre-Louis Bossart
2023-01-31 22:18 ` [PATCH v3 0/8] ASoC: cs42l42: Add SoundWire support Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230127165111.3010960-4-sbinding@opensource.cirrus.com \
--to=sbinding@opensource.cirrus.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@opensource.cirrus.com \
--cc=pierre-louis.bossart@linux.intel.com \
--cc=rf@opensource.cirrus.com \
--cc=vkoul@kernel.org \
--cc=yung-chuan.liao@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox