From: Kees Cook <keescook@chromium.org>
To: Javier Martinez Canillas <javier@dowhile0.org>
Cc: Kees Cook <keescook@chromium.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
linux-kernel@vger.kernel.org, linux-hardening@vger.kernel.org
Subject: [PATCH] regulator: max77802: Bounds check regulator id against opmode
Date: Fri, 27 Jan 2023 14:52:07 -0800 [thread overview]
Message-ID: <20230127225203.never.864-kees@kernel.org> (raw)
Explicitly bounds-check the id before accessing the opmode array. Seen
with GCC 13:
../drivers/regulator/max77802-regulator.c: In function 'max77802_enable':
../drivers/regulator/max77802-regulator.c:217:29: warning: array subscript [0, 41] is outside array bounds of 'unsigned int[42]' [-Warray-bounds=]
217 | if (max77802->opmode[id] == MAX77802_OFF_PWRREQ)
| ~~~~~~~~~~~~~~~~^~~~
../drivers/regulator/max77802-regulator.c:62:22: note: while referencing 'opmode'
62 | unsigned int opmode[MAX77802_REG_MAX];
| ^~~~~~
Cc: Javier Martinez Canillas <javier@dowhile0.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
---
drivers/regulator/max77802-regulator.c | 34 ++++++++++++++++++--------
1 file changed, 24 insertions(+), 10 deletions(-)
diff --git a/drivers/regulator/max77802-regulator.c b/drivers/regulator/max77802-regulator.c
index 21e0eb0f43f9..befe5f319819 100644
--- a/drivers/regulator/max77802-regulator.c
+++ b/drivers/regulator/max77802-regulator.c
@@ -94,9 +94,11 @@ static int max77802_set_suspend_disable(struct regulator_dev *rdev)
{
unsigned int val = MAX77802_OFF_PWRREQ;
struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev);
- int id = rdev_get_id(rdev);
+ unsigned int id = rdev_get_id(rdev);
int shift = max77802_get_opmode_shift(id);
+ if (WARN_ON_ONCE(id >= ARRAY_SIZE(max77802->opmode)))
+ return -EINVAL;
max77802->opmode[id] = val;
return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
rdev->desc->enable_mask, val << shift);
@@ -110,7 +112,7 @@ static int max77802_set_suspend_disable(struct regulator_dev *rdev)
static int max77802_set_mode(struct regulator_dev *rdev, unsigned int mode)
{
struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev);
- int id = rdev_get_id(rdev);
+ unsigned int id = rdev_get_id(rdev);
unsigned int val;
int shift = max77802_get_opmode_shift(id);
@@ -127,6 +129,9 @@ static int max77802_set_mode(struct regulator_dev *rdev, unsigned int mode)
return -EINVAL;
}
+ if (WARN_ON_ONCE(id >= ARRAY_SIZE(max77802->opmode)))
+ return -EINVAL;
+
max77802->opmode[id] = val;
return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
rdev->desc->enable_mask, val << shift);
@@ -135,8 +140,10 @@ static int max77802_set_mode(struct regulator_dev *rdev, unsigned int mode)
static unsigned max77802_get_mode(struct regulator_dev *rdev)
{
struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev);
- int id = rdev_get_id(rdev);
+ unsigned int id = rdev_get_id(rdev);
+ if (WARN_ON_ONCE(id >= ARRAY_SIZE(max77802->opmode)))
+ return -EINVAL;
return max77802_map_mode(max77802->opmode[id]);
}
@@ -160,10 +167,13 @@ static int max77802_set_suspend_mode(struct regulator_dev *rdev,
unsigned int mode)
{
struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev);
- int id = rdev_get_id(rdev);
+ unsigned int id = rdev_get_id(rdev);
unsigned int val;
int shift = max77802_get_opmode_shift(id);
+ if (WARN_ON_ONCE(id >= ARRAY_SIZE(max77802->opmode)))
+ return -EINVAL;
+
/*
* If the regulator has been disabled for suspend
* then is invalid to try setting a suspend mode.
@@ -209,9 +219,11 @@ static int max77802_set_suspend_mode(struct regulator_dev *rdev,
static int max77802_enable(struct regulator_dev *rdev)
{
struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev);
- int id = rdev_get_id(rdev);
+ unsigned int id = rdev_get_id(rdev);
int shift = max77802_get_opmode_shift(id);
+ if (WARN_ON_ONCE(id >= ARRAY_SIZE(max77802->opmode)))
+ return -EINVAL;
if (max77802->opmode[id] == MAX77802_OFF_PWRREQ)
max77802->opmode[id] = MAX77802_OPMODE_NORMAL;
@@ -495,7 +507,7 @@ static int max77802_pmic_probe(struct platform_device *pdev)
for (i = 0; i < MAX77802_REG_MAX; i++) {
struct regulator_dev *rdev;
- int id = regulators[i].id;
+ unsigned int id = regulators[i].id;
int shift = max77802_get_opmode_shift(id);
int ret;
@@ -513,10 +525,12 @@ static int max77802_pmic_probe(struct platform_device *pdev)
* the hardware reports OFF as the regulator operating mode.
* Default to operating mode NORMAL in that case.
*/
- if (val == MAX77802_STATUS_OFF)
- max77802->opmode[id] = MAX77802_OPMODE_NORMAL;
- else
- max77802->opmode[id] = val;
+ if (id < ARRAY_SIZE(max77802->opmode)) {
+ if (val == MAX77802_STATUS_OFF)
+ max77802->opmode[id] = MAX77802_OPMODE_NORMAL;
+ else
+ max77802->opmode[id] = val;
+ }
rdev = devm_regulator_register(&pdev->dev,
®ulators[i], &config);
--
2.34.1
next reply other threads:[~2023-01-27 22:52 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-27 22:52 Kees Cook [this message]
2023-01-28 7:22 ` [PATCH] regulator: max77802: Bounds check regulator id against opmode Javier Martinez Canillas
2023-01-28 17:19 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230127225203.never.864-kees@kernel.org \
--to=keescook@chromium.org \
--cc=broonie@kernel.org \
--cc=javier@dowhile0.org \
--cc=lgirdwood@gmail.com \
--cc=linux-hardening@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox