[PATCH v2 01/11] thermal/acpi: Remove the intermediate acpi_thermal_trip structure

[PATCH v2 01/11] thermal/acpi: Remove the intermediate acpi_thermal_trip structure

[Daniel Lezcano]

The struct acpi_thermal_trips() contains the critical, hot, passive
and active trip points structure. In order to use the generic thermal
trips which is a simple array, let's move out those fields in the
struct acpi_thermal instead of having them encapsulated in an
intermediate structure.

No functional changes, just simplification of code.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/acpi/thermal.c | 197 +++++++++++++++++++++--------------------
 1 file changed, 100 insertions(+), 97 deletions(-)

diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index 0b4b844f9d4c..0dbce190cacc 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -166,7 +166,10 @@ struct acpi_thermal {
 	volatile u8 zombie;
 	struct acpi_thermal_flags flags;
 	struct acpi_thermal_state state;
-	struct acpi_thermal_trips trips;
+	struct acpi_thermal_critical critical;
+	struct acpi_thermal_hot hot;
+	struct acpi_thermal_passive passive;
+	struct acpi_thermal_active active[ACPI_THERMAL_MAX_ACTIVE];
 	struct acpi_handle_list devices;
 	struct thermal_zone_device *thermal_zone;
 	int kelvin_offset;	/* in millidegrees */
@@ -271,7 +274,8 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
 	/* Critical Shutdown */
 	if (flag & ACPI_TRIPS_CRITICAL) {
 		status = acpi_evaluate_integer(tz->device->handle, "_CRT", NULL, &tmp);
-		tz->trips.critical.temperature = tmp;
+		tz->critical.temperature = tmp;
+
 		/*
 		 * Treat freezing temperatures as invalid as well; some
 		 * BIOSes return really low values and cause reboots at startup.
@@ -279,31 +283,32 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
 		 * ... so lets discard those as invalid.
 		 */
 		if (ACPI_FAILURE(status)) {
-			tz->trips.critical.flags.valid = 0;
+			tz->critical.flags.valid = 0;
 			acpi_handle_debug(tz->device->handle,
 					  "No critical threshold\n");
 		} else if (tmp <= 2732) {
 			pr_info(FW_BUG "Invalid critical threshold (%llu)\n", tmp);
-			tz->trips.critical.flags.valid = 0;
+			tz->critical.flags.valid = 0;
 		} else {
-			tz->trips.critical.flags.valid = 1;
+			tz->critical.flags.valid = 1;
 			acpi_handle_debug(tz->device->handle,
 					  "Found critical threshold [%lu]\n",
-					  tz->trips.critical.temperature);
+					  tz->critical.temperature);
 		}
-		if (tz->trips.critical.flags.valid) {
+
+		if (tz->critical.flags.valid) {
 			if (crt == -1) {
-				tz->trips.critical.flags.valid = 0;
+				tz->critical.flags.valid = 0;
 			} else if (crt > 0) {
 				unsigned long crt_k = celsius_to_deci_kelvin(crt);
 
 				/*
 				 * Allow override critical threshold
 				 */
-				if (crt_k > tz->trips.critical.temperature)
+				if (crt_k > tz->critical.temperature)
 					pr_info("Critical threshold %d C\n", crt);
 
-				tz->trips.critical.temperature = crt_k;
+				tz->critical.temperature = crt_k;
 			}
 		}
 	}
@@ -312,22 +317,22 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
 	if (flag & ACPI_TRIPS_HOT) {
 		status = acpi_evaluate_integer(tz->device->handle, "_HOT", NULL, &tmp);
 		if (ACPI_FAILURE(status)) {
-			tz->trips.hot.flags.valid = 0;
+			tz->hot.flags.valid = 0;
 			acpi_handle_debug(tz->device->handle,
 					  "No hot threshold\n");
 		} else {
-			tz->trips.hot.temperature = tmp;
-			tz->trips.hot.flags.valid = 1;
+			tz->hot.temperature = tmp;
+			tz->hot.flags.valid = 1;
 			acpi_handle_debug(tz->device->handle,
 					  "Found hot threshold [%lu]\n",
-					  tz->trips.hot.temperature);
+					  tz->hot.temperature);
 		}
 	}
 
 	/* Passive (optional) */
-	if (((flag & ACPI_TRIPS_PASSIVE) && tz->trips.passive.flags.valid) ||
+	if (((flag & ACPI_TRIPS_PASSIVE) && tz->passive.flags.valid) ||
 	    flag == ACPI_TRIPS_INIT) {
-		valid = tz->trips.passive.flags.valid;
+		valid = tz->passive.flags.valid;
 		if (psv == -1) {
 			status = AE_SUPPORT;
 		} else if (psv > 0) {
@@ -339,72 +344,70 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
 		}
 
 		if (ACPI_FAILURE(status)) {
-			tz->trips.passive.flags.valid = 0;
+			tz->passive.flags.valid = 0;
 		} else {
-			tz->trips.passive.temperature = tmp;
-			tz->trips.passive.flags.valid = 1;
+			tz->passive.temperature = tmp;
+			tz->passive.flags.valid = 1;
 			if (flag == ACPI_TRIPS_INIT) {
 				status = acpi_evaluate_integer(tz->device->handle,
 							       "_TC1", NULL, &tmp);
 				if (ACPI_FAILURE(status))
-					tz->trips.passive.flags.valid = 0;
+					tz->passive.flags.valid = 0;
 				else
-					tz->trips.passive.tc1 = tmp;
-
+					tz->passive.tc1 = tmp;
 				status = acpi_evaluate_integer(tz->device->handle,
 							       "_TC2", NULL, &tmp);
 				if (ACPI_FAILURE(status))
-					tz->trips.passive.flags.valid = 0;
+					tz->passive.flags.valid = 0;
 				else
-					tz->trips.passive.tc2 = tmp;
-
+					tz->passive.tc2 = tmp;
 				status = acpi_evaluate_integer(tz->device->handle,
 							       "_TSP", NULL, &tmp);
 				if (ACPI_FAILURE(status))
-					tz->trips.passive.flags.valid = 0;
+					tz->passive.flags.valid = 0;
 				else
-					tz->trips.passive.tsp = tmp;
+					tz->passive.tsp = tmp;
 			}
 		}
 	}
-	if ((flag & ACPI_TRIPS_DEVICES) && tz->trips.passive.flags.valid) {
+	if ((flag & ACPI_TRIPS_DEVICES) && tz->passive.flags.valid) {
 		memset(&devices, 0, sizeof(struct acpi_handle_list));
 		status = acpi_evaluate_reference(tz->device->handle, "_PSL",
 						 NULL, &devices);
 		if (ACPI_FAILURE(status)) {
 			acpi_handle_info(tz->device->handle,
 					 "Invalid passive threshold\n");
-			tz->trips.passive.flags.valid = 0;
+			tz->passive.flags.valid = 0;
 		} else {
-			tz->trips.passive.flags.valid = 1;
+			tz->passive.flags.valid = 1;
 		}
 
-		if (memcmp(&tz->trips.passive.devices, &devices,
+		if (memcmp(&tz->passive.devices, &devices,
 			   sizeof(struct acpi_handle_list))) {
-			memcpy(&tz->trips.passive.devices, &devices,
+			memcpy(&tz->passive.devices, &devices,
 			       sizeof(struct acpi_handle_list));
 			ACPI_THERMAL_TRIPS_EXCEPTION(flag, tz, "device");
 		}
 	}
 	if ((flag & ACPI_TRIPS_PASSIVE) || (flag & ACPI_TRIPS_DEVICES)) {
-		if (valid != tz->trips.passive.flags.valid)
+		if (valid != tz->passive.flags.valid)
 			ACPI_THERMAL_TRIPS_EXCEPTION(flag, tz, "state");
 	}
 
 	/* Active (optional) */
 	for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
 		char name[5] = { '_', 'A', 'C', ('0' + i), '\0' };
-		valid = tz->trips.active[i].flags.valid;
+		valid = tz->active[i].flags.valid;
 
 		if (act == -1)
 			break; /* disable all active trip points */
 
 		if (flag == ACPI_TRIPS_INIT || ((flag & ACPI_TRIPS_ACTIVE) &&
-		    tz->trips.active[i].flags.valid)) {
+		    tz->active[i].flags.valid)) {
 			status = acpi_evaluate_integer(tz->device->handle,
 						       name, NULL, &tmp);
 			if (ACPI_FAILURE(status)) {
-				tz->trips.active[i].flags.valid = 0;
+				tz->active[i].flags.valid = 0;
 				if (i == 0)
 					break;
 
@@ -412,50 +415,50 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
 					break;
 
 				if (i == 1)
-					tz->trips.active[0].temperature = celsius_to_deci_kelvin(act);
+					tz->active[0].temperature = celsius_to_deci_kelvin(act);
 				else
 					/*
 					 * Don't allow override higher than
 					 * the next higher trip point
 					 */
-					tz->trips.active[i-1].temperature =
-						(tz->trips.active[i-2].temperature <
+					tz->active[i - 1].temperature =
+						(tz->active[i - 2].temperature <
 						celsius_to_deci_kelvin(act) ?
-						tz->trips.active[i-2].temperature :
+						tz->active[i - 2].temperature :
 						celsius_to_deci_kelvin(act));
 
 				break;
 			} else {
-				tz->trips.active[i].temperature = tmp;
-				tz->trips.active[i].flags.valid = 1;
+				tz->active[i].temperature = tmp;
+				tz->active[i].flags.valid = 1;
 			}
 		}
 
 		name[2] = 'L';
-		if ((flag & ACPI_TRIPS_DEVICES) && tz->trips.active[i].flags.valid) {
+		if ((flag & ACPI_TRIPS_DEVICES) && tz->active[i].flags.valid ) {
 			memset(&devices, 0, sizeof(struct acpi_handle_list));
 			status = acpi_evaluate_reference(tz->device->handle,
 							 name, NULL, &devices);
 			if (ACPI_FAILURE(status)) {
 				acpi_handle_info(tz->device->handle,
 						 "Invalid active%d threshold\n", i);
-				tz->trips.active[i].flags.valid = 0;
+				tz->active[i].flags.valid = 0;
 			} else {
-				tz->trips.active[i].flags.valid = 1;
+				tz->active[i].flags.valid = 1;
 			}
 
-			if (memcmp(&tz->trips.active[i].devices, &devices,
+			if (memcmp(&tz->active[i].devices, &devices,
 				   sizeof(struct acpi_handle_list))) {
-				memcpy(&tz->trips.active[i].devices, &devices,
+				memcpy(&tz->active[i].devices, &devices,
 				       sizeof(struct acpi_handle_list));
 				ACPI_THERMAL_TRIPS_EXCEPTION(flag, tz, "device");
 			}
 		}
 		if ((flag & ACPI_TRIPS_ACTIVE) || (flag & ACPI_TRIPS_DEVICES))
-			if (valid != tz->trips.active[i].flags.valid)
+			if (valid != tz->active[i].flags.valid)
 				ACPI_THERMAL_TRIPS_EXCEPTION(flag, tz, "state");
 
-		if (!tz->trips.active[i].flags.valid)
+		if (!tz->active[i].flags.valid)
 			break;
 	}
 
@@ -480,12 +483,12 @@ static int acpi_thermal_get_trip_points(struct acpi_thermal *tz)
 	if (ret)
 		return ret;
 
-	valid = tz->trips.critical.flags.valid |
-		tz->trips.hot.flags.valid |
-		tz->trips.passive.flags.valid;
+	valid = tz->critical.flags.valid |
+		tz->hot.flags.valid |
+		tz->passive.flags.valid;
 
 	for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++)
-		valid |= tz->trips.active[i].flags.valid;
+		valid |= tz->active[i].flags.valid;
 
 	if (!valid) {
 		pr_warn(FW_BUG "No valid trip found\n");
@@ -522,7 +525,7 @@ static int thermal_get_trip_type(struct thermal_zone_device *thermal,
 	if (!tz || trip < 0)
 		return -EINVAL;
 
-	if (tz->trips.critical.flags.valid) {
+	if (tz->critical.flags.valid) {
 		if (!trip) {
 			*type = THERMAL_TRIP_CRITICAL;
 			return 0;
@@ -530,7 +533,7 @@ static int thermal_get_trip_type(struct thermal_zone_device *thermal,
 		trip--;
 	}
 
-	if (tz->trips.hot.flags.valid) {
+	if (tz->hot.flags.valid) {
 		if (!trip) {
 			*type = THERMAL_TRIP_HOT;
 			return 0;
@@ -538,7 +541,7 @@ static int thermal_get_trip_type(struct thermal_zone_device *thermal,
 		trip--;
 	}
 
-	if (tz->trips.passive.flags.valid) {
+	if (tz->passive.flags.valid) {
 		if (!trip) {
 			*type = THERMAL_TRIP_PASSIVE;
 			return 0;
@@ -546,7 +549,7 @@ static int thermal_get_trip_type(struct thermal_zone_device *thermal,
 		trip--;
 	}
 
-	for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE && tz->trips.active[i].flags.valid; i++) {
+	for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE && tz->active[i].flags.valid; i++) {
 		if (!trip) {
 			*type = THERMAL_TRIP_ACTIVE;
 			return 0;
@@ -566,30 +569,30 @@ static int thermal_get_trip_temp(struct thermal_zone_device *thermal,
 	if (!tz || trip < 0)
 		return -EINVAL;
 
-	if (tz->trips.critical.flags.valid) {
+	if (tz->critical.flags.valid) {
 		if (!trip) {
 			*temp = deci_kelvin_to_millicelsius_with_offset(
-					tz->trips.critical.temperature,
+					tz->critical.temperature,
 					tz->kelvin_offset);
 			return 0;
 		}
 		trip--;
 	}
 
-	if (tz->trips.hot.flags.valid) {
+	if (tz->hot.flags.valid) {
 		if (!trip) {
 			*temp = deci_kelvin_to_millicelsius_with_offset(
-					tz->trips.hot.temperature,
+					tz->hot.temperature,
 					tz->kelvin_offset);
 			return 0;
 		}
 		trip--;
 	}
 
-	if (tz->trips.passive.flags.valid) {
+	if (tz->passive.flags.valid) {
 		if (!trip) {
 			*temp = deci_kelvin_to_millicelsius_with_offset(
-					tz->trips.passive.temperature,
+					tz->passive.temperature,
 					tz->kelvin_offset);
 			return 0;
 		}
@@ -597,10 +600,10 @@ static int thermal_get_trip_temp(struct thermal_zone_device *thermal,
 	}
 
 	for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE &&
-		tz->trips.active[i].flags.valid; i++) {
+		tz->active[i].flags.valid; i++) {
 		if (!trip) {
 			*temp = deci_kelvin_to_millicelsius_with_offset(
-					tz->trips.active[i].temperature,
+					tz->active[i].temperature,
 					tz->kelvin_offset);
 			return 0;
 		}
@@ -615,9 +618,9 @@ static int thermal_get_crit_temp(struct thermal_zone_device *thermal,
 {
 	struct acpi_thermal *tz = thermal->devdata;
 
-	if (tz->trips.critical.flags.valid) {
+	if (tz->critical.flags.valid) {
 		*temperature = deci_kelvin_to_millicelsius_with_offset(
-					tz->trips.critical.temperature,
+					tz->critical.temperature,
 					tz->kelvin_offset);
 		return 0;
 	}
@@ -655,8 +658,8 @@ static int thermal_get_trend(struct thermal_zone_device *thermal,
 	 * tz->temperature has already been updated by generic thermal layer,
 	 * before this callback being invoked
 	 */
-	i = tz->trips.passive.tc1 * (tz->temperature - tz->last_temperature) +
-	    tz->trips.passive.tc2 * (tz->temperature - tz->trips.passive.temperature);
+	i = (tz->passive.tc1 * (tz->temperature - tz->last_temperature)) +
+		(tz->passive.tc2 * (tz->temperature - tz->passive.temperature));
 
 	if (i > 0)
 		*trend = THERMAL_TREND_RAISING;
@@ -701,16 +704,16 @@ static int acpi_thermal_cooling_device_cb(struct thermal_zone_device *thermal,
 	int trip = -1;
 	int result = 0;
 
-	if (tz->trips.critical.flags.valid)
+	if (tz->critical.flags.valid)
 		trip++;
 
-	if (tz->trips.hot.flags.valid)
+	if (tz->hot.flags.valid)
 		trip++;
 
-	if (tz->trips.passive.flags.valid) {
+	if (tz->passive.flags.valid) {
 		trip++;
-		for (i = 0; i < tz->trips.passive.devices.count; i++) {
-			handle = tz->trips.passive.devices.handles[i];
+		for (i = 0; i < tz->passive.devices.count; i++) {
+			handle = tz->passive.devices.handles[i];
 			dev = acpi_fetch_acpi_dev(handle);
 			if (dev != device)
 				continue;
@@ -732,12 +735,12 @@ static int acpi_thermal_cooling_device_cb(struct thermal_zone_device *thermal,
 	}
 
 	for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
-		if (!tz->trips.active[i].flags.valid)
+		if (!tz->active[i].flags.valid)
 			break;
 
 		trip++;
-		for (j = 0; j < tz->trips.active[i].devices.count; j++) {
-			handle = tz->trips.active[i].devices.handles[j];
+		for (j = 0; j < tz->active[i].devices.count; j++) {
+			handle = tz->active[i].devices.handles[j];
 			dev = acpi_fetch_acpi_dev(handle);
 			if (dev != device)
 				continue;
@@ -794,28 +797,29 @@ static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz)
 	acpi_status status;
 	int i;
 
-	if (tz->trips.critical.flags.valid)
+	if (tz->critical.flags.valid)
 		trips++;
 
-	if (tz->trips.hot.flags.valid)
+	if (tz->hot.flags.valid)
 		trips++;
 
-	if (tz->trips.passive.flags.valid)
+	if (tz->passive.flags.valid)
 		trips++;
 
-	for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE && tz->trips.active[i].flags.valid;
+	for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE && tz->active[i].flags.valid;
 	     i++, trips++);
 
-	if (tz->trips.passive.flags.valid)
-		tz->thermal_zone = thermal_zone_device_register("acpitz", trips, 0, tz,
-								&acpi_thermal_zone_ops, NULL,
-								tz->trips.passive.tsp * 100,
-								tz->polling_frequency * 100);
+	if (tz->passive.flags.valid)
+		tz->thermal_zone =
+			thermal_zone_device_register("acpitz", trips, 0, tz,
+						     		&acpi_thermal_zone_ops, NULL,
+						     		tz->passive.tsp*100,
+						     		tz->polling_frequency*100);
 	else
 		tz->thermal_zone =
 			thermal_zone_device_register("acpitz", trips, 0, tz,
-						     &acpi_thermal_zone_ops, NULL,
-						     0, tz->polling_frequency * 100);
+						     		&acpi_thermal_zone_ops, NULL,
+						     		0, tz->polling_frequency * 100);
 
 	if (IS_ERR(tz->thermal_zone))
 		return -ENODEV;
@@ -985,8 +989,8 @@ static int acpi_thermal_get_info(struct acpi_thermal *tz)
  */
 static void acpi_thermal_guess_offset(struct acpi_thermal *tz)
 {
-	if (tz->trips.critical.flags.valid &&
-	    (tz->trips.critical.temperature % 5) == 1)
+	if (tz->critical.flags.valid &&
+	    (tz->critical.temperature % 5) == 1)
 		tz->kelvin_offset = 273100;
 	else
 		tz->kelvin_offset = 273200;
@@ -1094,20 +1098,19 @@ static int acpi_thermal_resume(struct device *dev)
 		return -EINVAL;
 
 	for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
-		if (!tz->trips.active[i].flags.valid)
+		if (!tz->active[i].flags.valid)
 			break;
-
-		tz->trips.active[i].flags.enabled = 1;
-		for (j = 0; j < tz->trips.active[i].devices.count; j++) {
+		tz->active[i].flags.enabled = 1;
+		for (j = 0; j < tz->active[i].devices.count; j++) {
 			result = acpi_bus_update_power(
-					tz->trips.active[i].devices.handles[j],
+					tz->active[i].devices.handles[j],
 					&power_state);
 			if (result || (power_state != ACPI_STATE_D0)) {
-				tz->trips.active[i].flags.enabled = 0;
+				tz->active[i].flags.enabled = 0;
 				break;
 			}
 		}
-		tz->state.active |= tz->trips.active[i].flags.enabled;
+		tz->state.active |= tz->active[i].flags.enabled;
 	}
 
 	acpi_queue_thermal_check(tz);
-- 
2.34.1

[PATCH v2 02/11] thermal/acpi: Change to a common acpi_thermal_trip structure

[Daniel Lezcano]

The acpi trip point definition are very similar whatever their
types. Instead of creating a different structure for each trip type,
let's define and use a common one.

With this change we move a step forward to the generic trip point.

No functional changes.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/acpi/thermal.c | 35 ++++++-----------------------------
 1 file changed, 6 insertions(+), 29 deletions(-)

diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index 0dbce190cacc..e27b0b71fcf8 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -119,36 +119,13 @@ struct acpi_thermal_state_flags {
 	u8 reserved:6;
 };
 
-struct acpi_thermal_critical {
-	struct acpi_thermal_state_flags flags;
-	unsigned long temperature;
-};
-
-struct acpi_thermal_hot {
-	struct acpi_thermal_state_flags flags;
-	unsigned long temperature;
-};
-
-struct acpi_thermal_passive {
+struct acpi_thermal_trip {
 	struct acpi_thermal_state_flags flags;
+	struct acpi_handle_list devices;
 	unsigned long temperature;
 	unsigned long tc1;
 	unsigned long tc2;
 	unsigned long tsp;
-	struct acpi_handle_list devices;
-};
-
-struct acpi_thermal_active {
-	struct acpi_thermal_state_flags flags;
-	unsigned long temperature;
-	struct acpi_handle_list devices;
-};
-
-struct acpi_thermal_trips {
-	struct acpi_thermal_critical critical;
-	struct acpi_thermal_hot hot;
-	struct acpi_thermal_passive passive;
-	struct acpi_thermal_active active[ACPI_THERMAL_MAX_ACTIVE];
 };
 
 struct acpi_thermal_flags {
@@ -166,10 +143,10 @@ struct acpi_thermal {
 	volatile u8 zombie;
 	struct acpi_thermal_flags flags;
 	struct acpi_thermal_state state;
-	struct acpi_thermal_critical critical;
-	struct acpi_thermal_hot hot;
-	struct acpi_thermal_passive passive;
-	struct acpi_thermal_active active[ACPI_THERMAL_MAX_ACTIVE];
+	struct acpi_thermal_trip critical;
+	struct acpi_thermal_trip hot;
+	struct acpi_thermal_trip passive;
+	struct acpi_thermal_trip active[ACPI_THERMAL_MAX_ACTIVE];
 	struct acpi_handle_list devices;
 	struct thermal_zone_device *thermal_zone;
 	int kelvin_offset;	/* in millidegrees */
-- 
2.34.1

[PATCH v2 03/11] thermal/acpi: Convert the acpi thermal trips to an array

[Daniel Lezcano]

Instead of having multiple trip points in the structure fields for
each trip type, let's create an array of trip points.

No functional changes.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/acpi/thermal.c | 130 ++++++++++++++++++++++-------------------
 1 file changed, 69 insertions(+), 61 deletions(-)

diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index e27b0b71fcf8..6b07de78c4c6 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -104,6 +104,15 @@ static struct acpi_driver acpi_thermal_driver = {
 	.drv.pm = &acpi_thermal_pm,
 };
 
+enum {
+	ACPI_THERMAL_TRIP_CRITICAL,
+	ACPI_THERMAL_TRIP_HOT,
+	ACPI_THERMAL_TRIP_PASSIVE,
+	ACPI_THERMAL_TRIP_ACTIVE
+};
+
+#define ACPI_THERMAL_TRIP_MAX (ACPI_THERMAL_TRIP_ACTIVE + ACPI_THERMAL_MAX_ACTIVE)
+
 struct acpi_thermal_state {
 	u8 critical:1;
 	u8 hot:1;
@@ -143,9 +152,7 @@ struct acpi_thermal {
 	volatile u8 zombie;
 	struct acpi_thermal_flags flags;
 	struct acpi_thermal_state state;
-	struct acpi_thermal_trip critical;
-	struct acpi_thermal_trip hot;
-	struct acpi_thermal_trip passive;
+	struct acpi_thermal_trip trips[ACPI_THERMAL_TRIP_MAX];
 	struct acpi_thermal_trip active[ACPI_THERMAL_MAX_ACTIVE];
 	struct acpi_handle_list devices;
 	struct thermal_zone_device *thermal_zone;
@@ -251,7 +258,7 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
 	/* Critical Shutdown */
 	if (flag & ACPI_TRIPS_CRITICAL) {
 		status = acpi_evaluate_integer(tz->device->handle, "_CRT", NULL, &tmp);
-		tz->critical.temperature = tmp;
+		tz->trips[ACPI_THERMAL_TRIP_CRITICAL].temperature = tmp;
 
 		/*
 		 * Treat freezing temperatures as invalid as well; some
@@ -260,32 +267,32 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
 		 * ... so lets discard those as invalid.
 		 */
 		if (ACPI_FAILURE(status)) {
-			tz->critical.flags.valid = 0;
+			tz->trips[ACPI_THERMAL_TRIP_CRITICAL].flags.valid = 0;
 			acpi_handle_debug(tz->device->handle,
 					  "No critical threshold\n");
 		} else if (tmp <= 2732) {
 			pr_info(FW_BUG "Invalid critical threshold (%llu)\n", tmp);
-			tz->critical.flags.valid = 0;
+			tz->trips[ACPI_THERMAL_TRIP_CRITICAL].flags.valid = 0;
 		} else {
-			tz->critical.flags.valid = 1;
+			tz->trips[ACPI_THERMAL_TRIP_CRITICAL].flags.valid = 1;
 			acpi_handle_debug(tz->device->handle,
 					  "Found critical threshold [%lu]\n",
-					  tz->critical.temperature);
+					  tz->trips[ACPI_THERMAL_TRIP_CRITICAL].temperature);
 		}
 
-		if (tz->critical.flags.valid) {
+		if (tz->trips[ACPI_THERMAL_TRIP_CRITICAL].flags.valid) {
 			if (crt == -1) {
-				tz->critical.flags.valid = 0;
+				tz->trips[ACPI_THERMAL_TRIP_CRITICAL].flags.valid = 0;
 			} else if (crt > 0) {
 				unsigned long crt_k = celsius_to_deci_kelvin(crt);
 
 				/*
 				 * Allow override critical threshold
 				 */
-				if (crt_k > tz->critical.temperature)
+				if (crt_k > tz->trips[ACPI_THERMAL_TRIP_CRITICAL].temperature)
 					pr_info("Critical threshold %d C\n", crt);
 
-				tz->critical.temperature = crt_k;
+				tz->trips[ACPI_THERMAL_TRIP_CRITICAL].temperature = crt_k;
 			}
 		}
 	}
@@ -294,22 +301,22 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
 	if (flag & ACPI_TRIPS_HOT) {
 		status = acpi_evaluate_integer(tz->device->handle, "_HOT", NULL, &tmp);
 		if (ACPI_FAILURE(status)) {
-			tz->hot.flags.valid = 0;
+			tz->trips[ACPI_THERMAL_TRIP_HOT].flags.valid = 0;
 			acpi_handle_debug(tz->device->handle,
 					  "No hot threshold\n");
 		} else {
-			tz->hot.temperature = tmp;
-			tz->hot.flags.valid = 1;
+			tz->trips[ACPI_THERMAL_TRIP_HOT].temperature = tmp;
+			tz->trips[ACPI_THERMAL_TRIP_HOT].flags.valid = 1;
 			acpi_handle_debug(tz->device->handle,
 					  "Found hot threshold [%lu]\n",
-					  tz->hot.temperature);
+					  tz->trips[ACPI_THERMAL_TRIP_HOT].temperature);
 		}
 	}
 
 	/* Passive (optional) */
-	if (((flag & ACPI_TRIPS_PASSIVE) && tz->passive.flags.valid) ||
+	if (((flag & ACPI_TRIPS_PASSIVE) && tz->trips[ACPI_THERMAL_TRIP_PASSIVE].flags.valid) ||
 	    flag == ACPI_TRIPS_INIT) {
-		valid = tz->passive.flags.valid;
+		valid = tz->trips[ACPI_THERMAL_TRIP_PASSIVE].flags.valid;
 		if (psv == -1) {
 			status = AE_SUPPORT;
 		} else if (psv > 0) {
@@ -321,53 +328,53 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
 		}
 
 		if (ACPI_FAILURE(status)) {
-			tz->passive.flags.valid = 0;
+			tz->trips[ACPI_THERMAL_TRIP_PASSIVE].flags.valid = 0;
 		} else {
-			tz->passive.temperature = tmp;
-			tz->passive.flags.valid = 1;
+			tz->trips[ACPI_THERMAL_TRIP_PASSIVE].temperature = tmp;
+			tz->trips[ACPI_THERMAL_TRIP_PASSIVE].flags.valid = 1;
 			if (flag == ACPI_TRIPS_INIT) {
 				status = acpi_evaluate_integer(tz->device->handle,
 							       "_TC1", NULL, &tmp);
 				if (ACPI_FAILURE(status))
-					tz->passive.flags.valid = 0;
+					tz->trips[ACPI_THERMAL_TRIP_PASSIVE].flags.valid = 0;
 				else
-					tz->passive.tc1 = tmp;
+					tz->trips[ACPI_THERMAL_TRIP_PASSIVE].tc1 = tmp;
 				status = acpi_evaluate_integer(tz->device->handle,
 							       "_TC2", NULL, &tmp);
 				if (ACPI_FAILURE(status))
-					tz->passive.flags.valid = 0;
+					tz->trips[ACPI_THERMAL_TRIP_PASSIVE].flags.valid = 0;
 				else
-					tz->passive.tc2 = tmp;
+					tz->trips[ACPI_THERMAL_TRIP_PASSIVE].tc2 = tmp;
 				status = acpi_evaluate_integer(tz->device->handle,
 							       "_TSP", NULL, &tmp);
 				if (ACPI_FAILURE(status))
-					tz->passive.flags.valid = 0;
+					tz->trips[ACPI_THERMAL_TRIP_PASSIVE].flags.valid = 0;
 				else
-					tz->passive.tsp = tmp;
+					tz->trips[ACPI_THERMAL_TRIP_PASSIVE].tsp = tmp;
 			}
 		}
 	}
-	if ((flag & ACPI_TRIPS_DEVICES) && tz->passive.flags.valid) {
+	if ((flag & ACPI_TRIPS_DEVICES) && tz->trips[ACPI_THERMAL_TRIP_PASSIVE].flags.valid) {
 		memset(&devices, 0, sizeof(struct acpi_handle_list));
 		status = acpi_evaluate_reference(tz->device->handle, "_PSL",
 						 NULL, &devices);
 		if (ACPI_FAILURE(status)) {
 			acpi_handle_info(tz->device->handle,
 					 "Invalid passive threshold\n");
-			tz->passive.flags.valid = 0;
+			tz->trips[ACPI_THERMAL_TRIP_PASSIVE].flags.valid = 0;
 		} else {
-			tz->passive.flags.valid = 1;
+			tz->trips[ACPI_THERMAL_TRIP_PASSIVE].flags.valid = 1;
 		}
 
-		if (memcmp(&tz->passive.devices, &devices,
+		if (memcmp(&tz->trips[ACPI_THERMAL_TRIP_PASSIVE].devices, &devices,
 			   sizeof(struct acpi_handle_list))) {
-			memcpy(&tz->passive.devices, &devices,
+			memcpy(&tz->trips[ACPI_THERMAL_TRIP_PASSIVE].devices, &devices,
 			       sizeof(struct acpi_handle_list));
 			ACPI_THERMAL_TRIPS_EXCEPTION(flag, tz, "device");
 		}
 	}
 	if ((flag & ACPI_TRIPS_PASSIVE) || (flag & ACPI_TRIPS_DEVICES)) {
-		if (valid != tz->passive.flags.valid)
+		if (valid != tz->trips[ACPI_THERMAL_TRIP_PASSIVE].flags.valid)
 			ACPI_THERMAL_TRIPS_EXCEPTION(flag, tz, "state");
 	}
 
@@ -460,9 +467,9 @@ static int acpi_thermal_get_trip_points(struct acpi_thermal *tz)
 	if (ret)
 		return ret;
 
-	valid = tz->critical.flags.valid |
-		tz->hot.flags.valid |
-		tz->passive.flags.valid;
+	valid = tz->trips[ACPI_THERMAL_TRIP_CRITICAL].flags.valid |
+		tz->trips[ACPI_THERMAL_TRIP_HOT].flags.valid |
+		tz->trips[ACPI_THERMAL_TRIP_PASSIVE].flags.valid;
 
 	for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++)
 		valid |= tz->active[i].flags.valid;
@@ -502,7 +509,7 @@ static int thermal_get_trip_type(struct thermal_zone_device *thermal,
 	if (!tz || trip < 0)
 		return -EINVAL;
 
-	if (tz->critical.flags.valid) {
+	if (tz->trips[ACPI_THERMAL_TRIP_CRITICAL].flags.valid) {
 		if (!trip) {
 			*type = THERMAL_TRIP_CRITICAL;
 			return 0;
@@ -510,7 +517,7 @@ static int thermal_get_trip_type(struct thermal_zone_device *thermal,
 		trip--;
 	}
 
-	if (tz->hot.flags.valid) {
+	if (tz->trips[ACPI_THERMAL_TRIP_HOT].flags.valid) {
 		if (!trip) {
 			*type = THERMAL_TRIP_HOT;
 			return 0;
@@ -518,7 +525,7 @@ static int thermal_get_trip_type(struct thermal_zone_device *thermal,
 		trip--;
 	}
 
-	if (tz->passive.flags.valid) {
+	if (tz->trips[ACPI_THERMAL_TRIP_PASSIVE].flags.valid) {
 		if (!trip) {
 			*type = THERMAL_TRIP_PASSIVE;
 			return 0;
@@ -546,30 +553,30 @@ static int thermal_get_trip_temp(struct thermal_zone_device *thermal,
 	if (!tz || trip < 0)
 		return -EINVAL;
 
-	if (tz->critical.flags.valid) {
+	if (tz->trips[ACPI_THERMAL_TRIP_CRITICAL].flags.valid) {
 		if (!trip) {
 			*temp = deci_kelvin_to_millicelsius_with_offset(
-					tz->critical.temperature,
+					tz->trips[ACPI_THERMAL_TRIP_CRITICAL].temperature,
 					tz->kelvin_offset);
 			return 0;
 		}
 		trip--;
 	}
 
-	if (tz->hot.flags.valid) {
+	if (tz->trips[ACPI_THERMAL_TRIP_HOT].flags.valid) {
 		if (!trip) {
 			*temp = deci_kelvin_to_millicelsius_with_offset(
-					tz->hot.temperature,
+					tz->trips[ACPI_THERMAL_TRIP_HOT].temperature,
 					tz->kelvin_offset);
 			return 0;
 		}
 		trip--;
 	}
 
-	if (tz->passive.flags.valid) {
+	if (tz->trips[ACPI_THERMAL_TRIP_PASSIVE].flags.valid) {
 		if (!trip) {
 			*temp = deci_kelvin_to_millicelsius_with_offset(
-					tz->passive.temperature,
+					tz->trips[ACPI_THERMAL_TRIP_PASSIVE].temperature,
 					tz->kelvin_offset);
 			return 0;
 		}
@@ -595,9 +602,9 @@ static int thermal_get_crit_temp(struct thermal_zone_device *thermal,
 {
 	struct acpi_thermal *tz = thermal->devdata;
 
-	if (tz->critical.flags.valid) {
+	if (tz->trips[ACPI_THERMAL_TRIP_CRITICAL].flags.valid) {
 		*temperature = deci_kelvin_to_millicelsius_with_offset(
-					tz->critical.temperature,
+					tz->trips[ACPI_THERMAL_TRIP_CRITICAL].temperature,
 					tz->kelvin_offset);
 		return 0;
 	}
@@ -635,8 +642,9 @@ static int thermal_get_trend(struct thermal_zone_device *thermal,
 	 * tz->temperature has already been updated by generic thermal layer,
 	 * before this callback being invoked
 	 */
-	i = (tz->passive.tc1 * (tz->temperature - tz->last_temperature)) +
-		(tz->passive.tc2 * (tz->temperature - tz->passive.temperature));
+	i = (tz->trips[ACPI_THERMAL_TRIP_PASSIVE].tc1 * (tz->temperature - tz->last_temperature)) +
+		(tz->trips[ACPI_THERMAL_TRIP_PASSIVE].tc2 *
+		(tz->temperature - tz->trips[ACPI_THERMAL_TRIP_PASSIVE].temperature));
 
 	if (i > 0)
 		*trend = THERMAL_TREND_RAISING;
@@ -681,16 +689,16 @@ static int acpi_thermal_cooling_device_cb(struct thermal_zone_device *thermal,
 	int trip = -1;
 	int result = 0;
 
-	if (tz->critical.flags.valid)
+	if (tz->trips[ACPI_THERMAL_TRIP_CRITICAL].flags.valid)
 		trip++;
 
-	if (tz->hot.flags.valid)
+	if (tz->trips[ACPI_THERMAL_TRIP_HOT].flags.valid)
 		trip++;
 
-	if (tz->passive.flags.valid) {
+	if (tz->trips[ACPI_THERMAL_TRIP_PASSIVE].flags.valid) {
 		trip++;
-		for (i = 0; i < tz->passive.devices.count; i++) {
-			handle = tz->passive.devices.handles[i];
+		for (i = 0; i < tz->trips[ACPI_THERMAL_TRIP_PASSIVE].devices.count; i++) {
+			handle = tz->trips[ACPI_THERMAL_TRIP_PASSIVE].devices.handles[i];
 			dev = acpi_fetch_acpi_dev(handle);
 			if (dev != device)
 				continue;
@@ -774,23 +782,23 @@ static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz)
 	acpi_status status;
 	int i;
 
-	if (tz->critical.flags.valid)
+	if (tz->trips[ACPI_THERMAL_TRIP_CRITICAL].flags.valid)
 		trips++;
 
-	if (tz->hot.flags.valid)
+	if (tz->trips[ACPI_THERMAL_TRIP_HOT].flags.valid)
 		trips++;
 
-	if (tz->passive.flags.valid)
+	if (tz->trips[ACPI_THERMAL_TRIP_PASSIVE].flags.valid)
 		trips++;
 
 	for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE && tz->active[i].flags.valid;
 	     i++, trips++);
 
-	if (tz->passive.flags.valid)
+	if (tz->trips[ACPI_THERMAL_TRIP_PASSIVE].flags.valid)
 		tz->thermal_zone =
 			thermal_zone_device_register("acpitz", trips, 0, tz,
 						     		&acpi_thermal_zone_ops, NULL,
-						     		tz->passive.tsp*100,
+						     		tz->trips[ACPI_THERMAL_TRIP_PASSIVE].tsp*100,
 						     		tz->polling_frequency*100);
 	else
 		tz->thermal_zone =
@@ -966,8 +974,8 @@ static int acpi_thermal_get_info(struct acpi_thermal *tz)
  */
 static void acpi_thermal_guess_offset(struct acpi_thermal *tz)
 {
-	if (tz->critical.flags.valid &&
-	    (tz->critical.temperature % 5) == 1)
+	if (tz->trips[ACPI_THERMAL_TRIP_CRITICAL].flags.valid &&
+	    (tz->trips[ACPI_THERMAL_TRIP_CRITICAL].temperature % 5) == 1)
 		tz->kelvin_offset = 273100;
 	else
 		tz->kelvin_offset = 273200;
-- 
2.34.1

[PATCH v2 04/11] thermal/acpi: Move the active trip points to the same array

[Daniel Lezcano]

This change does the second pass to move the active trip points in the
thermal trip array.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/acpi/thermal.c | 71 +++++++++++++++++++++---------------------
 1 file changed, 35 insertions(+), 36 deletions(-)

diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index 6b07de78c4c6..903f0e3d95f5 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -153,7 +153,6 @@ struct acpi_thermal {
 	struct acpi_thermal_flags flags;
 	struct acpi_thermal_state state;
 	struct acpi_thermal_trip trips[ACPI_THERMAL_TRIP_MAX];
-	struct acpi_thermal_trip active[ACPI_THERMAL_MAX_ACTIVE];
 	struct acpi_handle_list devices;
 	struct thermal_zone_device *thermal_zone;
 	int kelvin_offset;	/* in millidegrees */
@@ -379,19 +378,19 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
 	}
 
 	/* Active (optional) */
-	for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
+	for (i = ACPI_THERMAL_TRIP_ACTIVE; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
 		char name[5] = { '_', 'A', 'C', ('0' + i), '\0' };
-		valid = tz->active[i].flags.valid;
+		valid = tz->trips[i].flags.valid;
 
 		if (act == -1)
 			break; /* disable all active trip points */
 
 		if (flag == ACPI_TRIPS_INIT || ((flag & ACPI_TRIPS_ACTIVE) &&
-		    tz->active[i].flags.valid)) {
+		    tz->trips[i].flags.valid)) {
 			status = acpi_evaluate_integer(tz->device->handle,
 						       name, NULL, &tmp);
 			if (ACPI_FAILURE(status)) {
-				tz->active[i].flags.valid = 0;
+				tz->trips[i].flags.valid = 0;
 				if (i == 0)
 					break;
 
@@ -399,50 +398,50 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
 					break;
 
 				if (i == 1)
-					tz->active[0].temperature = celsius_to_deci_kelvin(act);
+					tz->trips[0].temperature = celsius_to_deci_kelvin(act);
 				else
 					/*
 					 * Don't allow override higher than
 					 * the next higher trip point
 					 */
-					tz->active[i - 1].temperature =
-						(tz->active[i - 2].temperature <
+					tz->trips[i - 1].temperature =
+						(tz->trips[i - 2].temperature <
 						celsius_to_deci_kelvin(act) ?
-						tz->active[i - 2].temperature :
+						tz->trips[i - 2].temperature :
 						celsius_to_deci_kelvin(act));
 
 				break;
 			} else {
-				tz->active[i].temperature = tmp;
-				tz->active[i].flags.valid = 1;
+				tz->trips[i].temperature = tmp;
+				tz->trips[i].flags.valid = 1;
 			}
 		}
 
 		name[2] = 'L';
-		if ((flag & ACPI_TRIPS_DEVICES) && tz->active[i].flags.valid ) {
+		if ((flag & ACPI_TRIPS_DEVICES) && tz->trips[i].flags.valid ) {
 			memset(&devices, 0, sizeof(struct acpi_handle_list));
 			status = acpi_evaluate_reference(tz->device->handle,
 							 name, NULL, &devices);
 			if (ACPI_FAILURE(status)) {
 				acpi_handle_info(tz->device->handle,
 						 "Invalid active%d threshold\n", i);
-				tz->active[i].flags.valid = 0;
+				tz->trips[i].flags.valid = 0;
 			} else {
-				tz->active[i].flags.valid = 1;
+				tz->trips[i].flags.valid = 1;
 			}
 
-			if (memcmp(&tz->active[i].devices, &devices,
+			if (memcmp(&tz->trips[i].devices, &devices,
 				   sizeof(struct acpi_handle_list))) {
-				memcpy(&tz->active[i].devices, &devices,
+				memcpy(&tz->trips[i].devices, &devices,
 				       sizeof(struct acpi_handle_list));
 				ACPI_THERMAL_TRIPS_EXCEPTION(flag, tz, "device");
 			}
 		}
 		if ((flag & ACPI_TRIPS_ACTIVE) || (flag & ACPI_TRIPS_DEVICES))
-			if (valid != tz->active[i].flags.valid)
+			if (valid != tz->trips[i].flags.valid)
 				ACPI_THERMAL_TRIPS_EXCEPTION(flag, tz, "state");
 
-		if (!tz->active[i].flags.valid)
+		if (!tz->trips[i].flags.valid)
 			break;
 	}
 
@@ -471,8 +470,8 @@ static int acpi_thermal_get_trip_points(struct acpi_thermal *tz)
 		tz->trips[ACPI_THERMAL_TRIP_HOT].flags.valid |
 		tz->trips[ACPI_THERMAL_TRIP_PASSIVE].flags.valid;
 
-	for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++)
-		valid |= tz->active[i].flags.valid;
+	for (i = ACPI_THERMAL_TRIP_ACTIVE; i < ACPI_THERMAL_MAX_ACTIVE; i++)
+		valid |= tz->trips[i].flags.valid;
 
 	if (!valid) {
 		pr_warn(FW_BUG "No valid trip found\n");
@@ -533,7 +532,7 @@ static int thermal_get_trip_type(struct thermal_zone_device *thermal,
 		trip--;
 	}
 
-	for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE && tz->active[i].flags.valid; i++) {
+	for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE && tz->trips[i].flags.valid; i++) {
 		if (!trip) {
 			*type = THERMAL_TRIP_ACTIVE;
 			return 0;
@@ -583,11 +582,11 @@ static int thermal_get_trip_temp(struct thermal_zone_device *thermal,
 		trip--;
 	}
 
-	for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE &&
-		tz->active[i].flags.valid; i++) {
+	for (i = ACPI_THERMAL_TRIP_ACTIVE; i < ACPI_THERMAL_MAX_ACTIVE &&
+		tz->trips[i].flags.valid; i++) {
 		if (!trip) {
 			*temp = deci_kelvin_to_millicelsius_with_offset(
-					tz->active[i].temperature,
+					tz->trips[i].temperature,
 					tz->kelvin_offset);
 			return 0;
 		}
@@ -719,13 +718,13 @@ static int acpi_thermal_cooling_device_cb(struct thermal_zone_device *thermal,
 		}
 	}
 
-	for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
-		if (!tz->active[i].flags.valid)
+	for (i = ACPI_THERMAL_TRIP_ACTIVE; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
+		if (!tz->trips[i].flags.valid)
 			break;
 
 		trip++;
-		for (j = 0; j < tz->active[i].devices.count; j++) {
-			handle = tz->active[i].devices.handles[j];
+		for (j = 0; j < tz->trips[i].devices.count; j++) {
+			handle = tz->trips[i].devices.handles[j];
 			dev = acpi_fetch_acpi_dev(handle);
 			if (dev != device)
 				continue;
@@ -791,7 +790,7 @@ static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz)
 	if (tz->trips[ACPI_THERMAL_TRIP_PASSIVE].flags.valid)
 		trips++;
 
-	for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE && tz->active[i].flags.valid;
+	for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE && tz->trips[i].flags.valid;
 	     i++, trips++);
 
 	if (tz->trips[ACPI_THERMAL_TRIP_PASSIVE].flags.valid)
@@ -1082,20 +1081,20 @@ static int acpi_thermal_resume(struct device *dev)
 	if (!tz)
 		return -EINVAL;
 
-	for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
-		if (!tz->active[i].flags.valid)
+	for (i = ACPI_THERMAL_TRIP_ACTIVE; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
+		if (!tz->trips[i].flags.valid)
 			break;
-		tz->active[i].flags.enabled = 1;
-		for (j = 0; j < tz->active[i].devices.count; j++) {
+		tz->trips[i].flags.enabled = 1;
+		for (j = 0; j < tz->trips[i].devices.count; j++) {
 			result = acpi_bus_update_power(
-					tz->active[i].devices.handles[j],
+					tz->trips[i].devices.handles[j],
 					&power_state);
 			if (result || (power_state != ACPI_STATE_D0)) {
-				tz->active[i].flags.enabled = 0;
+				tz->trips[i].flags.enabled = 0;
 				break;
 			}
 		}
-		tz->state.active |= tz->active[i].flags.enabled;
+		tz->state.active |= tz->trips[i].flags.enabled;
 	}
 
 	acpi_queue_thermal_check(tz);
-- 
2.34.1

[PATCH v2 05/11] thermal/acpi: Optimize get_trip_points()

[Daniel Lezcano]

The function has two purposes. Initialize the trip points by reading
the ACPI table and then doing a check trip points exists.

This check will go through all the trip points and at the end if a
valid trip point is found, the parsing is considered valid.

Instead of checking all the trip points, exit when a valid trip point
is found.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/acpi/thermal.c | 19 ++++++++-----------
 1 file changed, 8 insertions(+), 11 deletions(-)

diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index 903f0e3d95f5..c4fd583fbf5c 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -461,23 +461,20 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
 
 static int acpi_thermal_get_trip_points(struct acpi_thermal *tz)
 {
-	int i, valid, ret = acpi_thermal_trips_update(tz, ACPI_TRIPS_INIT);
+	int i, ret;
 
+	ret = acpi_thermal_trips_update(tz, ACPI_TRIPS_INIT);
 	if (ret)
 		return ret;
 
-	valid = tz->trips[ACPI_THERMAL_TRIP_CRITICAL].flags.valid |
-		tz->trips[ACPI_THERMAL_TRIP_HOT].flags.valid |
-		tz->trips[ACPI_THERMAL_TRIP_PASSIVE].flags.valid;
+	for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
+		if (tz->trips[i].flags.valid)
+			return 0;
+	}
 
-	for (i = ACPI_THERMAL_TRIP_ACTIVE; i < ACPI_THERMAL_MAX_ACTIVE; i++)
-		valid |= tz->trips[i].flags.valid;
+	pr_warn(FW_BUG "No valid trip found\n");
 
-	if (!valid) {
-		pr_warn(FW_BUG "No valid trip found\n");
-		return -ENODEV;
-	}
-	return 0;
+	return -ENODEV;
 }
 
 /* sys I/F for generic thermal sysfs support */
-- 
2.34.1

[PATCH v2 06/11] thermal/acpi: Encapsulate in functions the trip initialization

[Daniel Lezcano]

The thermal trip update function is a bit difficult to read, it is
very long and has everything put in there to initialize the trip
points. In order to improve its readability, let's encapuslate the
different parts into dedicated functions. So we can act individually
per trip type changes and will make easier to review the next changes.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/acpi/thermal.c | 257 ++++++++++++++++++++++++-----------------
 1 file changed, 154 insertions(+), 103 deletions(-)

diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index c4fd583fbf5c..a3a8130c955f 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -246,113 +246,120 @@ do {	\
 		"Please report to linux-acpi@vger.kernel.org\n", str); \
 } while (0)
 
-static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
+static int acpi_thermal_trips_update_critical(struct acpi_thermal *tz, int flag)
 {
-	acpi_status status;
+	acpi_status status = AE_OK;
 	unsigned long long tmp;
-	struct acpi_handle_list devices;
-	int valid = 0;
-	int i;
 
-	/* Critical Shutdown */
-	if (flag & ACPI_TRIPS_CRITICAL) {
-		status = acpi_evaluate_integer(tz->device->handle, "_CRT", NULL, &tmp);
-		tz->trips[ACPI_THERMAL_TRIP_CRITICAL].temperature = tmp;
-
-		/*
-		 * Treat freezing temperatures as invalid as well; some
-		 * BIOSes return really low values and cause reboots at startup.
-		 * Below zero (Celsius) values clearly aren't right for sure..
-		 * ... so lets discard those as invalid.
-		 */
-		if (ACPI_FAILURE(status)) {
-			tz->trips[ACPI_THERMAL_TRIP_CRITICAL].flags.valid = 0;
-			acpi_handle_debug(tz->device->handle,
-					  "No critical threshold\n");
-		} else if (tmp <= 2732) {
-			pr_info(FW_BUG "Invalid critical threshold (%llu)\n", tmp);
+	status = acpi_evaluate_integer(tz->device->handle, "_CRT", NULL, &tmp);
+	tz->trips[ACPI_THERMAL_TRIP_CRITICAL].temperature = tmp;
+	/*
+	 * Treat freezing temperatures as invalid as well; some
+	 * BIOSes return really low values and cause reboots at startup.
+	 * Below zero (Celsius) values clearly aren't right for sure..
+	 * ... so lets discard those as invalid.
+	 */
+	if (ACPI_FAILURE(status)) {
+		tz->trips[ACPI_THERMAL_TRIP_CRITICAL].flags.valid = 0;
+		acpi_handle_debug(tz->device->handle,
+				  "No critical threshold\n");
+	} else if (tmp <= 2732) {
+		pr_info(FW_BUG "Invalid critical threshold (%llu)\n", tmp);
+		tz->trips[ACPI_THERMAL_TRIP_CRITICAL].flags.valid = 0;
+	} else {
+		tz->trips[ACPI_THERMAL_TRIP_CRITICAL].flags.valid = 1;
+		acpi_handle_debug(tz->device->handle,
+				  "Found critical threshold [%lu]\n",
+				  tz->trips[ACPI_THERMAL_TRIP_CRITICAL].temperature);
+	}
+	if (tz->trips[ACPI_THERMAL_TRIP_CRITICAL].flags.valid == 1) {
+		if (crt == -1) {
 			tz->trips[ACPI_THERMAL_TRIP_CRITICAL].flags.valid = 0;
-		} else {
-			tz->trips[ACPI_THERMAL_TRIP_CRITICAL].flags.valid = 1;
-			acpi_handle_debug(tz->device->handle,
-					  "Found critical threshold [%lu]\n",
-					  tz->trips[ACPI_THERMAL_TRIP_CRITICAL].temperature);
-		}
-
-		if (tz->trips[ACPI_THERMAL_TRIP_CRITICAL].flags.valid) {
-			if (crt == -1) {
-				tz->trips[ACPI_THERMAL_TRIP_CRITICAL].flags.valid = 0;
-			} else if (crt > 0) {
-				unsigned long crt_k = celsius_to_deci_kelvin(crt);
+		} else if (crt > 0) {
+			unsigned long crt_k = celsius_to_deci_kelvin(crt);
 
-				/*
-				 * Allow override critical threshold
-				 */
-				if (crt_k > tz->trips[ACPI_THERMAL_TRIP_CRITICAL].temperature)
-					pr_info("Critical threshold %d C\n", crt);
+			/*
+			 * Allow override critical threshold
+			 */
+			if (crt_k > tz->trips[ACPI_THERMAL_TRIP_CRITICAL].temperature)
+				pr_info("Critical threshold %d C\n", crt);
 
-				tz->trips[ACPI_THERMAL_TRIP_CRITICAL].temperature = crt_k;
-			}
+			tz->trips[ACPI_THERMAL_TRIP_CRITICAL].temperature = crt_k;
 		}
 	}
 
-	/* Critical Sleep (optional) */
-	if (flag & ACPI_TRIPS_HOT) {
-		status = acpi_evaluate_integer(tz->device->handle, "_HOT", NULL, &tmp);
-		if (ACPI_FAILURE(status)) {
-			tz->trips[ACPI_THERMAL_TRIP_HOT].flags.valid = 0;
-			acpi_handle_debug(tz->device->handle,
-					  "No hot threshold\n");
-		} else {
-			tz->trips[ACPI_THERMAL_TRIP_HOT].temperature = tmp;
-			tz->trips[ACPI_THERMAL_TRIP_HOT].flags.valid = 1;
-			acpi_handle_debug(tz->device->handle,
-					  "Found hot threshold [%lu]\n",
-					  tz->trips[ACPI_THERMAL_TRIP_HOT].temperature);
-		}
+	return 0;
+}
+
+static int acpi_thermal_trips_update_hot(struct acpi_thermal *tz, int flag)
+{
+	acpi_status status = AE_OK;
+	unsigned long long tmp;
+
+	status = acpi_evaluate_integer(tz->device->handle,
+				       "_HOT", NULL, &tmp);
+	if (ACPI_FAILURE(status)) {
+		tz->trips[ACPI_THERMAL_TRIP_HOT].flags.valid = 0;
+		acpi_handle_debug(tz->device->handle,
+				  "No hot threshold\n");
+	} else {
+		tz->trips[ACPI_THERMAL_TRIP_HOT].temperature = tmp;
+		tz->trips[ACPI_THERMAL_TRIP_HOT].flags.valid = 1;
+		acpi_handle_debug(tz->device->handle,
+				  "Found hot threshold [%lu]\n",
+				  tz->trips[ACPI_THERMAL_TRIP_HOT].temperature);
 	}
 
-	/* Passive (optional) */
-	if (((flag & ACPI_TRIPS_PASSIVE) && tz->trips[ACPI_THERMAL_TRIP_PASSIVE].flags.valid) ||
-	    flag == ACPI_TRIPS_INIT) {
-		valid = tz->trips[ACPI_THERMAL_TRIP_PASSIVE].flags.valid;
-		if (psv == -1) {
-			status = AE_SUPPORT;
-		} else if (psv > 0) {
-			tmp = celsius_to_deci_kelvin(psv);
-			status = AE_OK;
-		} else {
-			status = acpi_evaluate_integer(tz->device->handle,
-						       "_PSV", NULL, &tmp);
-		}
+	return 0;
+}
 
-		if (ACPI_FAILURE(status)) {
-			tz->trips[ACPI_THERMAL_TRIP_PASSIVE].flags.valid = 0;
-		} else {
-			tz->trips[ACPI_THERMAL_TRIP_PASSIVE].temperature = tmp;
-			tz->trips[ACPI_THERMAL_TRIP_PASSIVE].flags.valid = 1;
-			if (flag == ACPI_TRIPS_INIT) {
-				status = acpi_evaluate_integer(tz->device->handle,
-							       "_TC1", NULL, &tmp);
-				if (ACPI_FAILURE(status))
-					tz->trips[ACPI_THERMAL_TRIP_PASSIVE].flags.valid = 0;
-				else
-					tz->trips[ACPI_THERMAL_TRIP_PASSIVE].tc1 = tmp;
-				status = acpi_evaluate_integer(tz->device->handle,
-							       "_TC2", NULL, &tmp);
-				if (ACPI_FAILURE(status))
-					tz->trips[ACPI_THERMAL_TRIP_PASSIVE].flags.valid = 0;
-				else
-					tz->trips[ACPI_THERMAL_TRIP_PASSIVE].tc2 = tmp;
-				status = acpi_evaluate_integer(tz->device->handle,
-							       "_TSP", NULL, &tmp);
-				if (ACPI_FAILURE(status))
-					tz->trips[ACPI_THERMAL_TRIP_PASSIVE].flags.valid = 0;
-				else
-					tz->trips[ACPI_THERMAL_TRIP_PASSIVE].tsp = tmp;
-			}
+static int acpi_thermal_trips_update_passive(struct acpi_thermal *tz, int flag)
+{
+	acpi_status status;
+	unsigned long long tmp;
+	struct acpi_handle_list devices;
+	int valid = 0;
+
+	valid = tz->trips[ACPI_THERMAL_TRIP_PASSIVE].flags.valid;
+	if (psv == -1) {
+		status = AE_SUPPORT;
+	} else if (psv > 0) {
+		tmp = celsius_to_deci_kelvin(psv);
+		status = AE_OK;
+	} else {
+		status = acpi_evaluate_integer(tz->device->handle, "_PSV", NULL, &tmp);
+	}
+
+	if (ACPI_FAILURE(status))
+		tz->trips[ACPI_THERMAL_TRIP_PASSIVE].flags.valid = 0;
+	else {
+		tz->trips[ACPI_THERMAL_TRIP_PASSIVE].temperature = tmp;
+		tz->trips[ACPI_THERMAL_TRIP_PASSIVE].flags.valid = 1;
+		if (flag == ACPI_TRIPS_INIT) {
+			status = acpi_evaluate_integer(
+				tz->device->handle, "_TC1",
+				NULL, &tmp);
+			if (ACPI_FAILURE(status))
+				tz->trips[ACPI_THERMAL_TRIP_PASSIVE].flags.valid = 0;
+			else
+				tz->trips[ACPI_THERMAL_TRIP_PASSIVE].tc1 = tmp;
+			status = acpi_evaluate_integer(
+				tz->device->handle, "_TC2",
+				NULL, &tmp);
+			if (ACPI_FAILURE(status))
+				tz->trips[ACPI_THERMAL_TRIP_PASSIVE].flags.valid = 0;
+			else
+				tz->trips[ACPI_THERMAL_TRIP_PASSIVE].tc2 = tmp;
+			status = acpi_evaluate_integer(
+				tz->device->handle, "_TSP",
+				NULL, &tmp);
+			if (ACPI_FAILURE(status))
+				tz->trips[ACPI_THERMAL_TRIP_PASSIVE].flags.valid = 0;
+			else
+				tz->trips[ACPI_THERMAL_TRIP_PASSIVE].tsp = tmp;
 		}
 	}
+
 	if ((flag & ACPI_TRIPS_DEVICES) && tz->trips[ACPI_THERMAL_TRIP_PASSIVE].flags.valid) {
 		memset(&devices, 0, sizeof(struct acpi_handle_list));
 		status = acpi_evaluate_reference(tz->device->handle, "_PSL",
@@ -372,12 +379,23 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
 			ACPI_THERMAL_TRIPS_EXCEPTION(flag, tz, "device");
 		}
 	}
+
 	if ((flag & ACPI_TRIPS_PASSIVE) || (flag & ACPI_TRIPS_DEVICES)) {
 		if (valid != tz->trips[ACPI_THERMAL_TRIP_PASSIVE].flags.valid)
 			ACPI_THERMAL_TRIPS_EXCEPTION(flag, tz, "state");
 	}
 
-	/* Active (optional) */
+	return 0;
+}
+
+static int acpi_thermal_trips_update_active(struct acpi_thermal *tz, int flag)
+{
+	acpi_status status = AE_OK;
+	unsigned long long tmp;
+	struct acpi_handle_list devices;
+	int valid = 0;
+	int i;
+
 	for (i = ACPI_THERMAL_TRIP_ACTIVE; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
 		char name[5] = { '_', 'A', 'C', ('0' + i), '\0' };
 		valid = tz->trips[i].flags.valid;
@@ -445,17 +463,50 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
 			break;
 	}
 
-	if (flag & ACPI_TRIPS_DEVICES) {
-		memset(&devices, 0, sizeof(devices));
-		status = acpi_evaluate_reference(tz->device->handle, "_TZD",
-						 NULL, &devices);
-		if (ACPI_SUCCESS(status) &&
-		    memcmp(&tz->devices, &devices, sizeof(devices))) {
-			tz->devices = devices;
-			ACPI_THERMAL_TRIPS_EXCEPTION(flag, tz, "device");
-		}
+	return 0;
+}
+
+static int acpi_thermal_trips_update_devices(struct acpi_thermal *tz, int flag)
+{
+	acpi_status status = AE_OK;
+	struct acpi_handle_list devices;
+
+	memset(&devices, 0, sizeof(devices));
+	status = acpi_evaluate_reference(tz->device->handle, "_TZD", NULL, &devices);
+	if (ACPI_SUCCESS(status)
+	    && memcmp(&tz->devices, &devices, sizeof(devices))) {
+		tz->devices = devices;
+		ACPI_THERMAL_TRIPS_EXCEPTION(flag, tz, "device");
+	}
+
+	return 0;
+}
+
+static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
+{
+	/* Critical Shutdown */
+	if (flag & ACPI_TRIPS_CRITICAL) {
+		acpi_thermal_trips_update_critical(tz, flag);
 	}
 
+	/* Critical Sleep (optional) */
+	if (flag & ACPI_TRIPS_HOT) {
+		acpi_thermal_trips_update_hot(tz, flag);
+	}
+
+	/* Passive (optional) */
+	if (((flag & ACPI_TRIPS_PASSIVE) && tz->trips[ACPI_THERMAL_TRIP_PASSIVE].flags.valid) ||
+		(flag == ACPI_TRIPS_INIT)) {
+		acpi_thermal_trips_update_passive(tz, flag);
+	}
+
+	/* Active (optional) */
+	acpi_thermal_trips_update_active(tz, flag);
+
+	if (flag & ACPI_TRIPS_DEVICES) {
+		acpi_thermal_trips_update_devices(tz, flag);
+	}
+	
 	return 0;
 }
 
-- 
2.34.1

[PATCH v2 07/11] thermal/acpi: Simplifify the condition check

[Daniel Lezcano]

The condition:

if ((flag == ACPI_TRIPS_INIT) || ((flag & ACPI_TRIPS_ACTIVE))

and on the other side: ACPI_TRIPS_INIT (... | ACPI_TRIPS_ACTIVE)

So if the first predicate is true, the second is also true.

The 'valid' flag for the trip point is also checked before, so it is
pointless to redo the same check again and again as it is unchanged.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/acpi/thermal.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index a3a8130c955f..c7c2b3d63e90 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -321,6 +321,9 @@ static int acpi_thermal_trips_update_passive(struct acpi_thermal *tz, int flag)
 	int valid = 0;
 
 	valid = tz->trips[ACPI_THERMAL_TRIP_PASSIVE].flags.valid;
+	if (!valid)
+		return 0;
+
 	if (psv == -1) {
 		status = AE_SUPPORT;
 	} else if (psv > 0) {
@@ -398,13 +401,16 @@ static int acpi_thermal_trips_update_active(struct acpi_thermal *tz, int flag)
 
 	for (i = ACPI_THERMAL_TRIP_ACTIVE; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
 		char name[5] = { '_', 'A', 'C', ('0' + i), '\0' };
+
 		valid = tz->trips[i].flags.valid;
 
 		if (act == -1)
 			break; /* disable all active trip points */
 
-		if (flag == ACPI_TRIPS_INIT || ((flag & ACPI_TRIPS_ACTIVE) &&
-		    tz->trips[i].flags.valid)) {
+		if (!tz->trips[i].flags.valid)
+			continue;
+		
+		if (flag & ACPI_TRIPS_ACTIVE)  {
 			status = acpi_evaluate_integer(tz->device->handle,
 						       name, NULL, &tmp);
 			if (ACPI_FAILURE(status)) {
@@ -436,7 +442,7 @@ static int acpi_thermal_trips_update_active(struct acpi_thermal *tz, int flag)
 		}
 
 		name[2] = 'L';
-		if ((flag & ACPI_TRIPS_DEVICES) && tz->trips[i].flags.valid ) {
+		if (flag & ACPI_TRIPS_DEVICES) {
 			memset(&devices, 0, sizeof(struct acpi_handle_list));
 			status = acpi_evaluate_reference(tz->device->handle,
 							 name, NULL, &devices);
@@ -455,6 +461,7 @@ static int acpi_thermal_trips_update_active(struct acpi_thermal *tz, int flag)
 				ACPI_THERMAL_TRIPS_EXCEPTION(flag, tz, "device");
 			}
 		}
+
 		if ((flag & ACPI_TRIPS_ACTIVE) || (flag & ACPI_TRIPS_DEVICES))
 			if (valid != tz->trips[i].flags.valid)
 				ACPI_THERMAL_TRIPS_EXCEPTION(flag, tz, "state");
@@ -495,8 +502,7 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
 	}
 
 	/* Passive (optional) */
-	if (((flag & ACPI_TRIPS_PASSIVE) && tz->trips[ACPI_THERMAL_TRIP_PASSIVE].flags.valid) ||
-		(flag == ACPI_TRIPS_INIT)) {
+	if (flag & ACPI_TRIPS_PASSIVE) {
 		acpi_thermal_trips_update_passive(tz, flag);
 	}
 
-- 
2.34.1

[PATCH v2 08/11] thermal/acpi: Remove active and enabled flags

[Daniel Lezcano]

The 'active' field in the struct acpi_thermal_state is never used.

The 'enabled' field of the structure acpi_thermal_state_flags is
assigned but never used.

Remove them.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/acpi/thermal.c | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)

diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index c7c2b3d63e90..316a16ac1a09 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -117,14 +117,12 @@ struct acpi_thermal_state {
 	u8 critical:1;
 	u8 hot:1;
 	u8 passive:1;
-	u8 active:1;
 	u8 reserved:4;
 	int active_index;
 };
 
 struct acpi_thermal_state_flags {
 	u8 valid:1;
-	u8 enabled:1;
 	u8 reserved:6;
 };
 
@@ -1138,17 +1136,14 @@ static int acpi_thermal_resume(struct device *dev)
 	for (i = ACPI_THERMAL_TRIP_ACTIVE; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
 		if (!tz->trips[i].flags.valid)
 			break;
-		tz->trips[i].flags.enabled = 1;
+
 		for (j = 0; j < tz->trips[i].devices.count; j++) {
 			result = acpi_bus_update_power(
 					tz->trips[i].devices.handles[j],
 					&power_state);
-			if (result || (power_state != ACPI_STATE_D0)) {
-				tz->trips[i].flags.enabled = 0;
+			if (result || (power_state != ACPI_STATE_D0))
 				break;
-			}
 		}
-		tz->state.active |= tz->trips[i].flags.enabled;
 	}
 
 	acpi_queue_thermal_check(tz);
-- 
2.34.1

[PATCH v2 09/11] thermal/acpi: Convert the units to milli Celsuis

[Daniel Lezcano]

From: Daniel Lezcano <daniel.lezcano@kernel.org>

The trip points are storing the temperature using the Deci Kelvin
units but the thermal framework expects milli Celsius.

In order to migrate to the generic trip points where the temperature
unit is millicelsius. Let's change the unit, so the resulting code
will be compatible with thermal framework used unit.

Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/acpi/thermal.c | 56 ++++++++++++++++++------------------------
 1 file changed, 24 insertions(+), 32 deletions(-)

diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index 316a16ac1a09..9122d1c44777 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -177,9 +177,9 @@ static int acpi_thermal_get_temperature(struct acpi_thermal *tz)
 	if (ACPI_FAILURE(status))
 		return -ENODEV;
 
-	tz->temperature = tmp;
+	tz->temperature = deci_kelvin_to_millicelsius(tmp);
 
-	acpi_handle_debug(tz->device->handle, "Temperature is %lu dK\n",
+	acpi_handle_debug(tz->device->handle, "Temperature is %lu m°C\n",
 			  tz->temperature);
 
 	return 0;
@@ -250,7 +250,7 @@ static int acpi_thermal_trips_update_critical(struct acpi_thermal *tz, int flag)
 	unsigned long long tmp;
 
 	status = acpi_evaluate_integer(tz->device->handle, "_CRT", NULL, &tmp);
-	tz->trips[ACPI_THERMAL_TRIP_CRITICAL].temperature = tmp;
+	tz->trips[ACPI_THERMAL_TRIP_CRITICAL].temperature = deci_kelvin_to_millicelsius(tmp);
 	/*
 	 * Treat freezing temperatures as invalid as well; some
 	 * BIOSes return really low values and cause reboots at startup.
@@ -261,7 +261,7 @@ static int acpi_thermal_trips_update_critical(struct acpi_thermal *tz, int flag)
 		tz->trips[ACPI_THERMAL_TRIP_CRITICAL].flags.valid = 0;
 		acpi_handle_debug(tz->device->handle,
 				  "No critical threshold\n");
-	} else if (tmp <= 2732) {
+	} else if (tmp <= 0) {
 		pr_info(FW_BUG "Invalid critical threshold (%llu)\n", tmp);
 		tz->trips[ACPI_THERMAL_TRIP_CRITICAL].flags.valid = 0;
 	} else {
@@ -274,15 +274,15 @@ static int acpi_thermal_trips_update_critical(struct acpi_thermal *tz, int flag)
 		if (crt == -1) {
 			tz->trips[ACPI_THERMAL_TRIP_CRITICAL].flags.valid = 0;
 		} else if (crt > 0) {
-			unsigned long crt_k = celsius_to_deci_kelvin(crt);
+			crt *= MILLIDEGREE_PER_DEGREE;
 
 			/*
 			 * Allow override critical threshold
 			 */
-			if (crt_k > tz->trips[ACPI_THERMAL_TRIP_CRITICAL].temperature)
-				pr_info("Critical threshold %d C\n", crt);
+			if (crt > tz->trips[ACPI_THERMAL_TRIP_CRITICAL].temperature)
+				pr_info("Critical threshold %d m°C\n", crt);
 
-			tz->trips[ACPI_THERMAL_TRIP_CRITICAL].temperature = crt_k;
+			tz->trips[ACPI_THERMAL_TRIP_CRITICAL].temperature = crt;
 		}
 	}
 
@@ -325,10 +325,11 @@ static int acpi_thermal_trips_update_passive(struct acpi_thermal *tz, int flag)
 	if (psv == -1) {
 		status = AE_SUPPORT;
 	} else if (psv > 0) {
-		tmp = celsius_to_deci_kelvin(psv);
+		tmp = psv * MILLIDEGREE_PER_DEGREE;
 		status = AE_OK;
 	} else {
 		status = acpi_evaluate_integer(tz->device->handle, "_PSV", NULL, &tmp);
+		tmp = deci_kelvin_to_millicelsius(tmp);
 	}
 
 	if (ACPI_FAILURE(status))
@@ -411,6 +412,7 @@ static int acpi_thermal_trips_update_active(struct acpi_thermal *tz, int flag)
 		if (flag & ACPI_TRIPS_ACTIVE)  {
 			status = acpi_evaluate_integer(tz->device->handle,
 						       name, NULL, &tmp);
+			tmp = deci_kelvin_to_millicelsius(tmp);
 			if (ACPI_FAILURE(status)) {
 				tz->trips[i].flags.valid = 0;
 				if (i == 0)
@@ -420,7 +422,7 @@ static int acpi_thermal_trips_update_active(struct acpi_thermal *tz, int flag)
 					break;
 
 				if (i == 1)
-					tz->trips[0].temperature = celsius_to_deci_kelvin(act);
+					tz->trips[0].temperature = act * MILLIDEGREE_PER_DEGREE;
 				else
 					/*
 					 * Don't allow override higher than
@@ -428,9 +430,9 @@ static int acpi_thermal_trips_update_active(struct acpi_thermal *tz, int flag)
 					 */
 					tz->trips[i - 1].temperature =
 						(tz->trips[i - 2].temperature <
-						celsius_to_deci_kelvin(act) ?
+						act * MILLIDEGREE_PER_DEGREE ?
 						tz->trips[i - 2].temperature :
-						celsius_to_deci_kelvin(act));
+						act * MILLIDEGREE_PER_DEGREE);
 
 				break;
 			} else {
@@ -546,8 +548,8 @@ static int thermal_get_temp(struct thermal_zone_device *thermal, int *temp)
 	if (result)
 		return result;
 
-	*temp = deci_kelvin_to_millicelsius_with_offset(tz->temperature,
-							tz->kelvin_offset);
+	*temp = tz->temperature;
+
 	return 0;
 }
 
@@ -606,9 +608,7 @@ static int thermal_get_trip_temp(struct thermal_zone_device *thermal,
 
 	if (tz->trips[ACPI_THERMAL_TRIP_CRITICAL].flags.valid) {
 		if (!trip) {
-			*temp = deci_kelvin_to_millicelsius_with_offset(
-					tz->trips[ACPI_THERMAL_TRIP_CRITICAL].temperature,
-					tz->kelvin_offset);
+			*temp = tz->trips[ACPI_THERMAL_TRIP_CRITICAL].temperature;
 			return 0;
 		}
 		trip--;
@@ -616,9 +616,7 @@ static int thermal_get_trip_temp(struct thermal_zone_device *thermal,
 
 	if (tz->trips[ACPI_THERMAL_TRIP_HOT].flags.valid) {
 		if (!trip) {
-			*temp = deci_kelvin_to_millicelsius_with_offset(
-					tz->trips[ACPI_THERMAL_TRIP_HOT].temperature,
-					tz->kelvin_offset);
+			*temp = tz->trips[ACPI_THERMAL_TRIP_HOT].temperature;
 			return 0;
 		}
 		trip--;
@@ -626,9 +624,7 @@ static int thermal_get_trip_temp(struct thermal_zone_device *thermal,
 
 	if (tz->trips[ACPI_THERMAL_TRIP_PASSIVE].flags.valid) {
 		if (!trip) {
-			*temp = deci_kelvin_to_millicelsius_with_offset(
-					tz->trips[ACPI_THERMAL_TRIP_PASSIVE].temperature,
-					tz->kelvin_offset);
+			*temp = tz->trips[ACPI_THERMAL_TRIP_PASSIVE].temperature;
 			return 0;
 		}
 		trip--;
@@ -637,9 +633,7 @@ static int thermal_get_trip_temp(struct thermal_zone_device *thermal,
 	for (i = ACPI_THERMAL_TRIP_ACTIVE; i < ACPI_THERMAL_MAX_ACTIVE &&
 		tz->trips[i].flags.valid; i++) {
 		if (!trip) {
-			*temp = deci_kelvin_to_millicelsius_with_offset(
-					tz->trips[i].temperature,
-					tz->kelvin_offset);
+			*temp = tz->trips[i].temperature;
 			return 0;
 		}
 		trip--;
@@ -654,9 +648,7 @@ static int thermal_get_crit_temp(struct thermal_zone_device *thermal,
 	struct acpi_thermal *tz = thermal->devdata;
 
 	if (tz->trips[ACPI_THERMAL_TRIP_CRITICAL].flags.valid) {
-		*temperature = deci_kelvin_to_millicelsius_with_offset(
-					tz->trips[ACPI_THERMAL_TRIP_CRITICAL].temperature,
-					tz->kelvin_offset);
+		*temperature = tz->trips[ACPI_THERMAL_TRIP_CRITICAL].temperature;
 		return 0;
 	}
 
@@ -675,8 +667,8 @@ static int thermal_get_trend(struct thermal_zone_device *thermal,
 
 	if (type == THERMAL_TRIP_ACTIVE) {
 		int trip_temp;
-		int temp = deci_kelvin_to_millicelsius_with_offset(
-					tz->temperature, tz->kelvin_offset);
+		int temp = tz->temperature;
+
 		if (thermal_get_trip_temp(thermal, trip, &trip_temp))
 			return -EINVAL;
 
@@ -1090,7 +1082,7 @@ static int acpi_thermal_add(struct acpi_device *device)
 	INIT_WORK(&tz->thermal_check_work, acpi_thermal_check_fn);
 
 	pr_info("%s [%s] (%ld C)\n", acpi_device_name(device),
-		acpi_device_bid(device), deci_kelvin_to_celsius(tz->temperature));
+		acpi_device_bid(device), tz->temperature);
 	goto end;
 
 free_memory:
-- 
2.34.1

[PATCH v2 10/11] thermal/acpi: Rewrite the trip point intialization to use the generic thermal trip

[Daniel Lezcano]

We can use the thermal trip points defined in the thermal.h.

Let's initialize them properly and when the code will be moved to the
generic thermal structure, we will be able to remove the specific acpi
trip points.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/acpi/thermal.c | 238 ++++++++++++++++++++++++++++++++++++-----
 1 file changed, 212 insertions(+), 26 deletions(-)

diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index 9122d1c44777..f89236cd4fcd 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -153,6 +153,8 @@ struct acpi_thermal {
 	struct acpi_thermal_trip trips[ACPI_THERMAL_TRIP_MAX];
 	struct acpi_handle_list devices;
 	struct thermal_zone_device *thermal_zone;
+	struct thermal_trip *_trips;
+	int num_trips;
 	int kelvin_offset;	/* in millidegrees */
 	struct work_struct thermal_check_work;
 	struct mutex thermal_check_lock;
@@ -244,6 +246,198 @@ do {	\
 		"Please report to linux-acpi@vger.kernel.org\n", str); \
 } while (0)
 
+static void acpi_thermal_trips_override(struct thermal_trip *trip, int temperature)
+{
+	if (temperature > trip->temperature)
+		pr_info("Overriding temperature %d->%d m°C\n",
+			trip->temperature, temperature);
+
+	trip->temperature = temperature;
+}
+
+static struct thermal_trip *acpi_thermal_trips_alloc_critical(struct acpi_thermal *tz,
+							      struct thermal_trip *trips,
+							      int *num_trips)
+{
+	acpi_status status = AE_OK;
+	unsigned long long temp;
+
+	/*
+	 * Module parameters disable the critical trip point
+	 */
+	if (crt < 0)
+		goto out;
+
+	status = acpi_evaluate_integer(tz->device->handle, "_CRT", NULL, &temp);
+	if (ACPI_FAILURE(status)) {
+		acpi_handle_debug(tz->device->handle, "No critical threshold\n");
+		goto out;
+	}
+
+	if (temp <= 2732) {
+		pr_info(FW_BUG "Invalid critical threshold (%llu)\n", temp);
+		goto out;
+	}
+
+	trips = krealloc(trips, sizeof(*trips) * (*num_trips + 1), GFP_KERNEL);
+	if (!trips)
+		goto out;
+
+	memset(&trips[*num_trips], 0, sizeof(*trips));
+
+	trips[*num_trips].temperature = deci_kelvin_to_millicelsius(temp);
+	trips[*num_trips].type = THERMAL_TRIP_CRITICAL;
+
+	if (crt > 0)
+		acpi_thermal_trips_override(&trips[*num_trips], crt * MILLI);
+	
+	(*num_trips)++;
+out:
+	return trips;
+}
+
+static struct thermal_trip *acpi_thermal_trips_alloc_hot(struct acpi_thermal *tz,
+							 struct thermal_trip *trips,
+							 int *num_trips)
+{
+	acpi_status status;
+	unsigned long long temp;
+
+	status = acpi_evaluate_integer(tz->device->handle, "_HOT", NULL, &temp);
+	if (ACPI_FAILURE(status)) {
+		acpi_handle_debug(tz->device->handle, "No hot threshold\n");
+		goto out;
+	}
+
+	trips = krealloc(trips, sizeof(*trips) * (*num_trips + 1), GFP_KERNEL);
+	if (!trips)
+		goto out;
+
+	memset(&trips[*num_trips], 0, sizeof(*trips));
+
+	trips[*num_trips].temperature = deci_kelvin_to_millicelsius(temp);
+	trips[*num_trips].type = THERMAL_TRIP_HOT;
+	
+	(*num_trips)++;
+out:
+	return trips;
+}
+
+static struct thermal_trip *acpi_thermal_trips_alloc_passive(struct acpi_thermal *tz,
+							     struct thermal_trip *trips,
+							     int *num_trips)
+{
+	struct acpi_handle_list devices;
+	acpi_status status;
+	unsigned long long temp;
+
+	/*
+	 * Module parameters disable all passive trip points
+	 */
+	if (psv < 0)
+		goto out;
+	
+	status = acpi_evaluate_integer(tz->device->handle, "_PSV", NULL, &temp);
+	if (ACPI_FAILURE(status)) {
+		acpi_handle_debug(tz->device->handle, "No passive threshold\n");
+		goto out;
+	}
+
+	status = acpi_evaluate_reference(tz->device->handle, "_PSL", NULL, &devices);
+	if (ACPI_FAILURE(status)) {
+		acpi_handle_debug(tz->device->handle, "No passive device associated\n");
+		goto out;
+	}
+	
+	trips = krealloc(trips, sizeof(*trips) * (*num_trips + 1), GFP_KERNEL);
+	if (!trips)
+		goto out;
+
+	memset(&trips[*num_trips], 0, sizeof(*trips));
+
+	trips[*num_trips].temperature = deci_kelvin_to_millicelsius(temp);
+	trips[*num_trips].type = THERMAL_TRIP_PASSIVE;
+	
+	(*num_trips)++;
+out:
+	return trips;
+}
+
+static struct thermal_trip *acpi_thermal_trips_alloc_active(struct acpi_thermal *tz,
+							    struct thermal_trip *trips,
+							    int *num_trips)
+{
+	struct acpi_handle_list devices;
+	acpi_status status;
+	unsigned long long temp;
+	int i;
+
+	/*
+	 * Module parameters disable all active trip points
+	 */
+	if (act < 0)
+		return trips;
+
+	for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
+		char name[5];
+
+		sprintf(name, "_AC%d", i);
+
+		status = acpi_evaluate_integer(tz->device->handle, name, NULL, &temp);
+		if (ACPI_FAILURE(status))
+			break;
+
+		sprintf(name, "_AL%d", i);
+
+		status = acpi_evaluate_reference(tz->device->handle, name, NULL, &devices);
+		if (ACPI_FAILURE(status)) {
+			acpi_handle_info(tz->device->handle, "No _AL%d defined for _AC%d\n", i, i);
+			break;
+		}
+
+		trips = krealloc(trips, sizeof(*trips) * (*num_trips + 1), GFP_KERNEL);
+		if (!trips)
+			break;
+
+		memset(&trips[*num_trips], 0, sizeof(*trips));
+
+		trips[*num_trips].temperature = deci_kelvin_to_millicelsius(temp);
+		trips[*num_trips].type = THERMAL_TRIP_ACTIVE;
+	
+		(*num_trips)++;
+	}
+
+	/*
+	 * We found at least one trip point and we have an override option
+	 */
+	if (i && act) {
+		/*
+		 * Regarding the ACPI specification AC0 is the highest active
+		 * temperature trip point. We will override this one.
+		 */
+		acpi_thermal_trips_override(&trips[*num_trips], act * MILLI);		
+	}
+
+	return trips;
+}
+
+static struct thermal_trip *acpi_thermal_trips_alloc(struct acpi_thermal *tz, int *num_trips)
+{
+	struct thermal_trip *trips = NULL;
+
+	*num_trips = 0;
+
+	trips = acpi_thermal_trips_alloc_critical(tz, trips, num_trips);
+
+	trips = acpi_thermal_trips_alloc_hot(tz, trips, num_trips);
+
+	trips = acpi_thermal_trips_alloc_passive(tz, trips, num_trips);
+
+	trips = acpi_thermal_trips_alloc_active(tz, trips, num_trips);
+
+	return trips;
+}
+
 static int acpi_thermal_trips_update_critical(struct acpi_thermal *tz, int flag)
 {
 	acpi_status status = AE_OK;
@@ -398,7 +592,7 @@ static int acpi_thermal_trips_update_active(struct acpi_thermal *tz, int flag)
 	int valid = 0;
 	int i;
 
-	for (i = ACPI_THERMAL_TRIP_ACTIVE; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
+	for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
 		char name[5] = { '_', 'A', 'C', ('0' + i), '\0' };
 
 		valid = tz->trips[i].flags.valid;
@@ -820,35 +1014,20 @@ static struct thermal_zone_device_ops acpi_thermal_zone_ops = {
 
 static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz)
 {
-	int trips = 0;
 	int result;
 	acpi_status status;
-	int i;
-
-	if (tz->trips[ACPI_THERMAL_TRIP_CRITICAL].flags.valid)
-		trips++;
-
-	if (tz->trips[ACPI_THERMAL_TRIP_HOT].flags.valid)
-		trips++;
-
-	if (tz->trips[ACPI_THERMAL_TRIP_PASSIVE].flags.valid)
-		trips++;
-
-	for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE && tz->trips[i].flags.valid;
-	     i++, trips++);
 
 	if (tz->trips[ACPI_THERMAL_TRIP_PASSIVE].flags.valid)
 		tz->thermal_zone =
-			thermal_zone_device_register("acpitz", trips, 0, tz,
-						     		&acpi_thermal_zone_ops, NULL,
-						     		tz->trips[ACPI_THERMAL_TRIP_PASSIVE].tsp*100,
-						     		tz->polling_frequency*100);
+			thermal_zone_device_register_with_trips("acpitz", tz->_trips, tz->num_trips, 0, tz,
+								&acpi_thermal_zone_ops, NULL,
+								tz->trips[ACPI_THERMAL_TRIP_PASSIVE].tsp*100,
+								tz->polling_frequency*100);
 	else
 		tz->thermal_zone =
-			thermal_zone_device_register("acpitz", trips, 0, tz,
-						     		&acpi_thermal_zone_ops, NULL,
-						     		0, tz->polling_frequency * 100);
-
+			thermal_zone_device_register_with_trips("acpitz", tz->_trips, tz->num_trips, 0, tz,
+								&acpi_thermal_zone_ops, NULL,
+								0, tz->polling_frequency*100);
 	if (IS_ERR(tz->thermal_zone))
 		return -ENODEV;
 
@@ -1051,8 +1230,8 @@ static void acpi_thermal_check_fn(struct work_struct *work)
 
 static int acpi_thermal_add(struct acpi_device *device)
 {
-	struct acpi_thermal *tz;
-	int result;
+	struct acpi_thermal *tz = NULL;
+	int result = 0;
 
 	if (!device)
 		return -EINVAL;
@@ -1073,9 +1252,13 @@ static int acpi_thermal_add(struct acpi_device *device)
 
 	acpi_thermal_guess_offset(tz);
 
+	tz->_trips = acpi_thermal_trips_alloc(tz, &tz->num_trips);
+	if (!tz->_trips)
+		goto free_trips;
+
 	result = acpi_thermal_register_thermal_zone(tz);
 	if (result)
-		goto free_memory;
+		goto free_trips;
 
 	refcount_set(&tz->thermal_check_count, 3);
 	mutex_init(&tz->thermal_check_lock);
@@ -1085,6 +1268,8 @@ static int acpi_thermal_add(struct acpi_device *device)
 		acpi_device_bid(device), tz->temperature);
 	goto end;
 
+free_trips:
+	kfree(tz->_trips);
 free_memory:
 	kfree(tz);
 end:
@@ -1101,6 +1286,7 @@ static void acpi_thermal_remove(struct acpi_device *device)
 	flush_workqueue(acpi_thermal_pm_queue);
 	tz = acpi_driver_data(device);
 
+	kfree(tz->trips);
 	acpi_thermal_unregister_thermal_zone(tz);
 	kfree(tz);
 }
-- 
2.34.1

[PATCH v2 11/11] thermal/acpi: Use the thermal framework ACPI API

[Daniel Lezcano]

From: Daniel Lezcano <daniel.lezcano@kernel.org>

The thermal framework has a set of functions to fill the trip
points. Those functions are already used by the int340x and the quark
Intel's platform.

Reuse these functions in order to consolidate the generic trip points
usage across the thermal ACPI user.

Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/acpi/thermal.c | 85 +++++++++++++++++++-----------------------
 1 file changed, 38 insertions(+), 47 deletions(-)

diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index f89236cd4fcd..5e4d93c67b75 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -259,8 +259,11 @@ static struct thermal_trip *acpi_thermal_trips_alloc_critical(struct acpi_therma
 							      struct thermal_trip *trips,
 							      int *num_trips)
 {
-	acpi_status status = AE_OK;
-	unsigned long long temp;
+	struct thermal_trip trip = {
+		.type = THERMAL_TRIP_CRITICAL,
+	};
+
+	int ret;
 
 	/*
 	 * Module parameters disable the critical trip point
@@ -268,14 +271,12 @@ static struct thermal_trip *acpi_thermal_trips_alloc_critical(struct acpi_therma
 	if (crt < 0)
 		goto out;
 
-	status = acpi_evaluate_integer(tz->device->handle, "_CRT", NULL, &temp);
-	if (ACPI_FAILURE(status)) {
-		acpi_handle_debug(tz->device->handle, "No critical threshold\n");
+	ret = thermal_acpi_critical_trip_temp(tz->device->handle, &trip.temperature);
+	if (ret)
 		goto out;
-	}
-
-	if (temp <= 2732) {
-		pr_info(FW_BUG "Invalid critical threshold (%llu)\n", temp);
+	
+	if (trip.temperature <= 0) {
+		pr_info(FW_BUG "Invalid critical threshold (%d)\n", trip.temperature);
 		goto out;
 	}
 
@@ -283,10 +284,7 @@ static struct thermal_trip *acpi_thermal_trips_alloc_critical(struct acpi_therma
 	if (!trips)
 		goto out;
 
-	memset(&trips[*num_trips], 0, sizeof(*trips));
-
-	trips[*num_trips].temperature = deci_kelvin_to_millicelsius(temp);
-	trips[*num_trips].type = THERMAL_TRIP_CRITICAL;
+	trips[*num_trips] = trip; /* structure copy */
 
 	if (crt > 0)
 		acpi_thermal_trips_override(&trips[*num_trips], crt * MILLI);
@@ -300,23 +298,21 @@ static struct thermal_trip *acpi_thermal_trips_alloc_hot(struct acpi_thermal *tz
 							 struct thermal_trip *trips,
 							 int *num_trips)
 {
-	acpi_status status;
-	unsigned long long temp;
+	struct thermal_trip trip = {
+		.type = THERMAL_TRIP_HOT,
+	};
 
-	status = acpi_evaluate_integer(tz->device->handle, "_HOT", NULL, &temp);
-	if (ACPI_FAILURE(status)) {
-		acpi_handle_debug(tz->device->handle, "No hot threshold\n");
+	int ret;
+
+	ret = thermal_acpi_hot_trip_temp(tz->device->handle, &trip.temperature);
+	if (ret)
 		goto out;
-	}
 
 	trips = krealloc(trips, sizeof(*trips) * (*num_trips + 1), GFP_KERNEL);
 	if (!trips)
 		goto out;
 
-	memset(&trips[*num_trips], 0, sizeof(*trips));
-
-	trips[*num_trips].temperature = deci_kelvin_to_millicelsius(temp);
-	trips[*num_trips].type = THERMAL_TRIP_HOT;
+	trips[*num_trips] = trip; /* structure copy */
 	
 	(*num_trips)++;
 out:
@@ -327,9 +323,12 @@ static struct thermal_trip *acpi_thermal_trips_alloc_passive(struct acpi_thermal
 							     struct thermal_trip *trips,
 							     int *num_trips)
 {
-	struct acpi_handle_list devices;
 	acpi_status status;
-	unsigned long long temp;
+	struct acpi_handle_list devices;
+	struct thermal_trip trip = {
+		.type = THERMAL_TRIP_PASSIVE
+	};
+	int ret;
 
 	/*
 	 * Module parameters disable all passive trip points
@@ -337,26 +336,21 @@ static struct thermal_trip *acpi_thermal_trips_alloc_passive(struct acpi_thermal
 	if (psv < 0)
 		goto out;
 	
-	status = acpi_evaluate_integer(tz->device->handle, "_PSV", NULL, &temp);
-	if (ACPI_FAILURE(status)) {
-		acpi_handle_debug(tz->device->handle, "No passive threshold\n");
+	ret = thermal_acpi_passive_trip_temp(tz->device->handle, &trip.temperature);
+	if (ret)
 		goto out;
-	}
-
+	
 	status = acpi_evaluate_reference(tz->device->handle, "_PSL", NULL, &devices);
 	if (ACPI_FAILURE(status)) {
 		acpi_handle_debug(tz->device->handle, "No passive device associated\n");
 		goto out;
 	}
-	
+
 	trips = krealloc(trips, sizeof(*trips) * (*num_trips + 1), GFP_KERNEL);
 	if (!trips)
 		goto out;
 
-	memset(&trips[*num_trips], 0, sizeof(*trips));
-
-	trips[*num_trips].temperature = deci_kelvin_to_millicelsius(temp);
-	trips[*num_trips].type = THERMAL_TRIP_PASSIVE;
+	trips[*num_trips] = trip; /* structure copy */	
 	
 	(*num_trips)++;
 out:
@@ -367,10 +361,9 @@ static struct thermal_trip *acpi_thermal_trips_alloc_active(struct acpi_thermal
 							    struct thermal_trip *trips,
 							    int *num_trips)
 {
-	struct acpi_handle_list devices;
 	acpi_status status;
-	unsigned long long temp;
-	int i;
+	struct acpi_handle_list devices;
+	int i, ret;
 
 	/*
 	 * Module parameters disable all active trip points
@@ -379,12 +372,13 @@ static struct thermal_trip *acpi_thermal_trips_alloc_active(struct acpi_thermal
 		return trips;
 
 	for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
+		struct thermal_trip trip = {
+			.type = THERMAL_TRIP_ACTIVE,
+		};
 		char name[5];
 
-		sprintf(name, "_AC%d", i);
-
-		status = acpi_evaluate_integer(tz->device->handle, name, NULL, &temp);
-		if (ACPI_FAILURE(status))
+		ret = thermal_acpi_active_trip_temp(tz->device->handle, i , &trip.temperature);
+		if (ret)
 			break;
 
 		sprintf(name, "_AL%d", i);
@@ -394,16 +388,13 @@ static struct thermal_trip *acpi_thermal_trips_alloc_active(struct acpi_thermal
 			acpi_handle_info(tz->device->handle, "No _AL%d defined for _AC%d\n", i, i);
 			break;
 		}
-
+		
 		trips = krealloc(trips, sizeof(*trips) * (*num_trips + 1), GFP_KERNEL);
 		if (!trips)
 			break;
 
-		memset(&trips[*num_trips], 0, sizeof(*trips));
+		trips[*num_trips] = trip; /* structure copy */	
 
-		trips[*num_trips].temperature = deci_kelvin_to_millicelsius(temp);
-		trips[*num_trips].type = THERMAL_TRIP_ACTIVE;
-	
 		(*num_trips)++;
 	}
 
-- 
2.34.1

Re: [PATCH v2 11/11] thermal/acpi: Use the thermal framework ACPI API

[kernel test robot]

Hi Daniel,

I love your patch! Yet something to improve:

[auto build test ERROR on rafael-pm/linux-next]
[also build test ERROR on linus/master v6.2-rc6 next-20230203]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Daniel-Lezcano/thermal-acpi-Remove-the-intermediate-acpi_thermal_trip-structure/20230204-015126
base:   https://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git linux-next
patch link:    https://lore.kernel.org/r/20230203174429.3375691-12-daniel.lezcano%40linaro.org
patch subject: [PATCH v2 11/11] thermal/acpi: Use the thermal framework ACPI API
config: i386-randconfig-a003 (https://download.01.org/0day-ci/archive/20230204/202302041301.JFOakwDi-lkp@intel.com/config)
compiler: gcc-11 (Debian 11.3.0-8) 11.3.0
reproduce (this is a W=1 build):
        # https://github.com/intel-lab-lkp/linux/commit/2c921da06a8ac8f9e047f1a683146e1c5561534a
        git remote add linux-review https://github.com/intel-lab-lkp/linux
        git fetch --no-tags linux-review Daniel-Lezcano/thermal-acpi-Remove-the-intermediate-acpi_thermal_trip-structure/20230204-015126
        git checkout 2c921da06a8ac8f9e047f1a683146e1c5561534a
        # save the config file
        mkdir build_dir && cp config build_dir/.config
        make W=1 O=build_dir ARCH=i386 olddefconfig
        make W=1 O=build_dir ARCH=i386 SHELL=/bin/bash drivers/

If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

   drivers/acpi/thermal.c: In function 'acpi_thermal_trips_alloc_critical':
>> drivers/acpi/thermal.c:274:15: error: implicit declaration of function 'thermal_acpi_critical_trip_temp' [-Werror=implicit-function-declaration]
     274 |         ret = thermal_acpi_critical_trip_temp(tz->device->handle, &trip.temperature);
         |               ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/acpi/thermal.c: In function 'acpi_thermal_trips_alloc_hot':
>> drivers/acpi/thermal.c:307:15: error: implicit declaration of function 'thermal_acpi_hot_trip_temp'; did you mean 'thermal_zone_get_crit_temp'? [-Werror=implicit-function-declaration]
     307 |         ret = thermal_acpi_hot_trip_temp(tz->device->handle, &trip.temperature);
         |               ^~~~~~~~~~~~~~~~~~~~~~~~~~
         |               thermal_zone_get_crit_temp
   drivers/acpi/thermal.c: In function 'acpi_thermal_trips_alloc_passive':
>> drivers/acpi/thermal.c:339:15: error: implicit declaration of function 'thermal_acpi_passive_trip_temp' [-Werror=implicit-function-declaration]
     339 |         ret = thermal_acpi_passive_trip_temp(tz->device->handle, &trip.temperature);
         |               ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/acpi/thermal.c: In function 'acpi_thermal_trips_alloc_active':
>> drivers/acpi/thermal.c:380:23: error: implicit declaration of function 'thermal_acpi_active_trip_temp' [-Werror=implicit-function-declaration]
     380 |                 ret = thermal_acpi_active_trip_temp(tz->device->handle, i , &trip.temperature);
         |                       ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   cc1: some warnings being treated as errors


vim +/thermal_acpi_critical_trip_temp +274 drivers/acpi/thermal.c

   257	
   258	static struct thermal_trip *acpi_thermal_trips_alloc_critical(struct acpi_thermal *tz,
   259								      struct thermal_trip *trips,
   260								      int *num_trips)
   261	{
   262		struct thermal_trip trip = {
   263			.type = THERMAL_TRIP_CRITICAL,
   264		};
   265	
   266		int ret;
   267	
   268		/*
   269		 * Module parameters disable the critical trip point
   270		 */
   271		if (crt < 0)
   272			goto out;
   273	
 > 274		ret = thermal_acpi_critical_trip_temp(tz->device->handle, &trip.temperature);
   275		if (ret)
   276			goto out;
   277		
   278		if (trip.temperature <= 0) {
   279			pr_info(FW_BUG "Invalid critical threshold (%d)\n", trip.temperature);
   280			goto out;
   281		}
   282	
   283		trips = krealloc(trips, sizeof(*trips) * (*num_trips + 1), GFP_KERNEL);
   284		if (!trips)
   285			goto out;
   286	
   287		trips[*num_trips] = trip; /* structure copy */
   288	
   289		if (crt > 0)
   290			acpi_thermal_trips_override(&trips[*num_trips], crt * MILLI);
   291		
   292		(*num_trips)++;
   293	out:
   294		return trips;
   295	}
   296	
   297	static struct thermal_trip *acpi_thermal_trips_alloc_hot(struct acpi_thermal *tz,
   298								 struct thermal_trip *trips,
   299								 int *num_trips)
   300	{
   301		struct thermal_trip trip = {
   302			.type = THERMAL_TRIP_HOT,
   303		};
   304	
   305		int ret;
   306	
 > 307		ret = thermal_acpi_hot_trip_temp(tz->device->handle, &trip.temperature);
   308		if (ret)
   309			goto out;
   310	
   311		trips = krealloc(trips, sizeof(*trips) * (*num_trips + 1), GFP_KERNEL);
   312		if (!trips)
   313			goto out;
   314	
   315		trips[*num_trips] = trip; /* structure copy */
   316		
   317		(*num_trips)++;
   318	out:
   319		return trips;
   320	}
   321	
   322	static struct thermal_trip *acpi_thermal_trips_alloc_passive(struct acpi_thermal *tz,
   323								     struct thermal_trip *trips,
   324								     int *num_trips)
   325	{
   326		acpi_status status;
   327		struct acpi_handle_list devices;
   328		struct thermal_trip trip = {
   329			.type = THERMAL_TRIP_PASSIVE
   330		};
   331		int ret;
   332	
   333		/*
   334		 * Module parameters disable all passive trip points
   335		 */
   336		if (psv < 0)
   337			goto out;
   338		
 > 339		ret = thermal_acpi_passive_trip_temp(tz->device->handle, &trip.temperature);
   340		if (ret)
   341			goto out;
   342		
   343		status = acpi_evaluate_reference(tz->device->handle, "_PSL", NULL, &devices);
   344		if (ACPI_FAILURE(status)) {
   345			acpi_handle_debug(tz->device->handle, "No passive device associated\n");
   346			goto out;
   347		}
   348	
   349		trips = krealloc(trips, sizeof(*trips) * (*num_trips + 1), GFP_KERNEL);
   350		if (!trips)
   351			goto out;
   352	
   353		trips[*num_trips] = trip; /* structure copy */	
   354		
   355		(*num_trips)++;
   356	out:
   357		return trips;
   358	}
   359	
   360	static struct thermal_trip *acpi_thermal_trips_alloc_active(struct acpi_thermal *tz,
   361								    struct thermal_trip *trips,
   362								    int *num_trips)
   363	{
   364		acpi_status status;
   365		struct acpi_handle_list devices;
   366		int i, ret;
   367	
   368		/*
   369		 * Module parameters disable all active trip points
   370		 */
   371		if (act < 0)
   372			return trips;
   373	
   374		for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
   375			struct thermal_trip trip = {
   376				.type = THERMAL_TRIP_ACTIVE,
   377			};
   378			char name[5];
   379	
 > 380			ret = thermal_acpi_active_trip_temp(tz->device->handle, i , &trip.temperature);
   381			if (ret)
   382				break;
   383	
   384			sprintf(name, "_AL%d", i);
   385	
   386			status = acpi_evaluate_reference(tz->device->handle, name, NULL, &devices);
   387			if (ACPI_FAILURE(status)) {
   388				acpi_handle_info(tz->device->handle, "No _AL%d defined for _AC%d\n", i, i);
   389				break;
   390			}
   391			
   392			trips = krealloc(trips, sizeof(*trips) * (*num_trips + 1), GFP_KERNEL);
   393			if (!trips)
   394				break;
   395	
   396			trips[*num_trips] = trip; /* structure copy */	
   397	
   398			(*num_trips)++;
   399		}
   400	
   401		/*
   402		 * We found at least one trip point and we have an override option
   403		 */
   404		if (i && act) {
   405			/*
   406			 * Regarding the ACPI specification AC0 is the highest active
   407			 * temperature trip point. We will override this one.
   408			 */
   409			acpi_thermal_trips_override(&trips[*num_trips], act * MILLI);		
   410		}
   411	
   412		return trips;
   413	}
   414	

-- 
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests

Re: [PATCH v2 11/11] thermal/acpi: Use the thermal framework ACPI API

[kernel test robot]

Hi Daniel,

I love your patch! Yet something to improve:

[auto build test ERROR on rafael-pm/linux-next]
[also build test ERROR on linus/master v6.2-rc6 next-20230203]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Daniel-Lezcano/thermal-acpi-Remove-the-intermediate-acpi_thermal_trip-structure/20230204-015126
base:   https://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git linux-next
patch link:    https://lore.kernel.org/r/20230203174429.3375691-12-daniel.lezcano%40linaro.org
patch subject: [PATCH v2 11/11] thermal/acpi: Use the thermal framework ACPI API
config: i386-randconfig-a002 (https://download.01.org/0day-ci/archive/20230204/202302041525.ZDaLecDd-lkp@intel.com/config)
compiler: clang version 14.0.6 (https://github.com/llvm/llvm-project f28c006a5895fc0e329fe15fead81e37457cb1d1)
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/intel-lab-lkp/linux/commit/2c921da06a8ac8f9e047f1a683146e1c5561534a
        git remote add linux-review https://github.com/intel-lab-lkp/linux
        git fetch --no-tags linux-review Daniel-Lezcano/thermal-acpi-Remove-the-intermediate-acpi_thermal_trip-structure/20230204-015126
        git checkout 2c921da06a8ac8f9e047f1a683146e1c5561534a
        # save the config file
        mkdir build_dir && cp config build_dir/.config
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=i386 olddefconfig
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=i386 SHELL=/bin/bash drivers/

If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

>> drivers/acpi/thermal.c:274:8: error: implicit declaration of function 'thermal_acpi_critical_trip_temp' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
           ret = thermal_acpi_critical_trip_temp(tz->device->handle, &trip.temperature);
                 ^
>> drivers/acpi/thermal.c:307:8: error: implicit declaration of function 'thermal_acpi_hot_trip_temp' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
           ret = thermal_acpi_hot_trip_temp(tz->device->handle, &trip.temperature);
                 ^
   drivers/acpi/thermal.c:307:8: note: did you mean 'thermal_zone_get_crit_temp'?
   include/linux/thermal.h:347:5: note: 'thermal_zone_get_crit_temp' declared here
   int thermal_zone_get_crit_temp(struct thermal_zone_device *tz, int *temp);
       ^
>> drivers/acpi/thermal.c:339:8: error: implicit declaration of function 'thermal_acpi_passive_trip_temp' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
           ret = thermal_acpi_passive_trip_temp(tz->device->handle, &trip.temperature);
                 ^
>> drivers/acpi/thermal.c:380:9: error: implicit declaration of function 'thermal_acpi_active_trip_temp' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
                   ret = thermal_acpi_active_trip_temp(tz->device->handle, i , &trip.temperature);
                         ^
   4 errors generated.


vim +/thermal_acpi_critical_trip_temp +274 drivers/acpi/thermal.c

   257	
   258	static struct thermal_trip *acpi_thermal_trips_alloc_critical(struct acpi_thermal *tz,
   259								      struct thermal_trip *trips,
   260								      int *num_trips)
   261	{
   262		struct thermal_trip trip = {
   263			.type = THERMAL_TRIP_CRITICAL,
   264		};
   265	
   266		int ret;
   267	
   268		/*
   269		 * Module parameters disable the critical trip point
   270		 */
   271		if (crt < 0)
   272			goto out;
   273	
 > 274		ret = thermal_acpi_critical_trip_temp(tz->device->handle, &trip.temperature);
   275		if (ret)
   276			goto out;
   277		
   278		if (trip.temperature <= 0) {
   279			pr_info(FW_BUG "Invalid critical threshold (%d)\n", trip.temperature);
   280			goto out;
   281		}
   282	
   283		trips = krealloc(trips, sizeof(*trips) * (*num_trips + 1), GFP_KERNEL);
   284		if (!trips)
   285			goto out;
   286	
   287		trips[*num_trips] = trip; /* structure copy */
   288	
   289		if (crt > 0)
   290			acpi_thermal_trips_override(&trips[*num_trips], crt * MILLI);
   291		
   292		(*num_trips)++;
   293	out:
   294		return trips;
   295	}
   296	
   297	static struct thermal_trip *acpi_thermal_trips_alloc_hot(struct acpi_thermal *tz,
   298								 struct thermal_trip *trips,
   299								 int *num_trips)
   300	{
   301		struct thermal_trip trip = {
   302			.type = THERMAL_TRIP_HOT,
   303		};
   304	
   305		int ret;
   306	
 > 307		ret = thermal_acpi_hot_trip_temp(tz->device->handle, &trip.temperature);
   308		if (ret)
   309			goto out;
   310	
   311		trips = krealloc(trips, sizeof(*trips) * (*num_trips + 1), GFP_KERNEL);
   312		if (!trips)
   313			goto out;
   314	
   315		trips[*num_trips] = trip; /* structure copy */
   316		
   317		(*num_trips)++;
   318	out:
   319		return trips;
   320	}
   321	
   322	static struct thermal_trip *acpi_thermal_trips_alloc_passive(struct acpi_thermal *tz,
   323								     struct thermal_trip *trips,
   324								     int *num_trips)
   325	{
   326		acpi_status status;
   327		struct acpi_handle_list devices;
   328		struct thermal_trip trip = {
   329			.type = THERMAL_TRIP_PASSIVE
   330		};
   331		int ret;
   332	
   333		/*
   334		 * Module parameters disable all passive trip points
   335		 */
   336		if (psv < 0)
   337			goto out;
   338		
 > 339		ret = thermal_acpi_passive_trip_temp(tz->device->handle, &trip.temperature);
   340		if (ret)
   341			goto out;
   342		
   343		status = acpi_evaluate_reference(tz->device->handle, "_PSL", NULL, &devices);
   344		if (ACPI_FAILURE(status)) {
   345			acpi_handle_debug(tz->device->handle, "No passive device associated\n");
   346			goto out;
   347		}
   348	
   349		trips = krealloc(trips, sizeof(*trips) * (*num_trips + 1), GFP_KERNEL);
   350		if (!trips)
   351			goto out;
   352	
   353		trips[*num_trips] = trip; /* structure copy */	
   354		
   355		(*num_trips)++;
   356	out:
   357		return trips;
   358	}
   359	
   360	static struct thermal_trip *acpi_thermal_trips_alloc_active(struct acpi_thermal *tz,
   361								    struct thermal_trip *trips,
   362								    int *num_trips)
   363	{
   364		acpi_status status;
   365		struct acpi_handle_list devices;
   366		int i, ret;
   367	
   368		/*
   369		 * Module parameters disable all active trip points
   370		 */
   371		if (act < 0)
   372			return trips;
   373	
   374		for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
   375			struct thermal_trip trip = {
   376				.type = THERMAL_TRIP_ACTIVE,
   377			};
   378			char name[5];
   379	
 > 380			ret = thermal_acpi_active_trip_temp(tz->device->handle, i , &trip.temperature);
   381			if (ret)
   382				break;
   383	
   384			sprintf(name, "_AL%d", i);
   385	
   386			status = acpi_evaluate_reference(tz->device->handle, name, NULL, &devices);
   387			if (ACPI_FAILURE(status)) {
   388				acpi_handle_info(tz->device->handle, "No _AL%d defined for _AC%d\n", i, i);
   389				break;
   390			}
   391			
   392			trips = krealloc(trips, sizeof(*trips) * (*num_trips + 1), GFP_KERNEL);
   393			if (!trips)
   394				break;
   395	
   396			trips[*num_trips] = trip; /* structure copy */	
   397	
   398			(*num_trips)++;
   399		}
   400	
   401		/*
   402		 * We found at least one trip point and we have an override option
   403		 */
   404		if (i && act) {
   405			/*
   406			 * Regarding the ACPI specification AC0 is the highest active
   407			 * temperature trip point. We will override this one.
   408			 */
   409			acpi_thermal_trips_override(&trips[*num_trips], act * MILLI);		
   410		}
   411	
   412		return trips;
   413	}
   414	

-- 
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests