From: Jacob Pan <jacob.jun.pan@linux.intel.com>
To: Baolu Lu <baolu.lu@linux.intel.com>
Cc: LKML <linux-kernel@vger.kernel.org>,
iommu@lists.linux.dev, Joerg Roedel <joro@8bytes.org>,
Robin Murphy <robin.murphy@arm.com>,
Will Deacon <will@kernel.org>,
David Woodhouse <dwmw2@infradead.org>,
Raj Ashok <ashok.raj@intel.com>,
"Tian, Kevin" <kevin.tian@intel.com>, Yi Liu <yi.l.liu@intel.com>,
stable@vger.kernel.org, Sukumar Ghorai <sukumar.ghorai@intel.com>,
jacob.jun.pan@linux.intel.com
Subject: Re: [PATCH v2] iommu/vt-d: Fix PASID directory pointer coherency
Date: Wed, 8 Feb 2023 08:35:36 -0800 [thread overview]
Message-ID: <20230208083536.3d8f5f7a@jacob-builder> (raw)
In-Reply-To: <18bbd442-c892-1f17-bf6c-b6d797379deb@linux.intel.com>
Hi Baolu,
On Wed, 8 Feb 2023 11:46:37 +0800, Baolu Lu <baolu.lu@linux.intel.com>
wrote:
> On 2023/2/8 8:09, Jacob Pan wrote:
> > On platforms that do not support IOMMU Extended capability bit 0
> > Page-walk Coherency, CPU caches are not snooped when IOMMU is accessing
> > any translation structures. IOMMU access goes only directly to
> > memory. Intel IOMMU code was missing a flush for the PASID table
> > directory that resulted in the unrecoverable fault as shown below.
> >
> > This patch adds clflush calls whenever activating and updating
> > a PASID table directory to ensure cache coherency.
> >
> > On the reverse direction, there's no need to clflush the PASID directory
> > pointer when we deactivate a context entry in that IOMMU hardware will
> > not see the old PASID directory pointer after we clear the context
> > entry. PASID directory entries are also never freed once allocated.
> >
> > [ 0.555386] DMAR: DRHD: handling fault status reg 3
> > [ 0.555805] DMAR: [DMA Read NO_PASID] Request device [00:0d.2] fault
> > addr 0x1026a4000 [fault reason 0x51] SM: Present bit in Directory Entry
> > is clear [ 0.556348] DMAR: Dump dmar1 table entries for IOVA
> > 0x1026a4000 [ 0.556348] DMAR: scalable mode root entry: hi
> > 0x0000000102448001, low 0x0000000101b3e001 [ 0.556348] DMAR: context
> > entry: hi 0x0000000000000000, low 0x0000000101b4d401 [ 0.556348]
> > DMAR: pasid dir entry: 0x0000000101b4e001 [ 0.556348] DMAR: pasid
> > table entry[0]: 0x0000000000000109 [ 0.556348] DMAR: pasid table
> > entry[1]: 0x0000000000000001 [ 0.556348] DMAR: pasid table entry[2]:
> > 0x0000000000000000 [ 0.556348] DMAR: pasid table entry[3]:
> > 0x0000000000000000 [ 0.556348] DMAR: pasid table entry[4]:
> > 0x0000000000000000 [ 0.556348] DMAR: pasid table entry[5]:
> > 0x0000000000000000 [ 0.556348] DMAR: pasid table entry[6]:
> > 0x0000000000000000 [ 0.556348] DMAR: pasid table entry[7]:
> > 0x0000000000000000 [ 0.556348] DMAR: PTE not present at level 4
> >
> > Cc:<stable@vger.kernel.org>
> > Fixes: 0bbeb01a4faf ("iommu/vt-d: Manage scalalble mode PASID tables")
> > Reported-by: Sukumar Ghorai<sukumar.ghorai@intel.com>
> > Signed-off-by: Ashok Raj<ashok.raj@intel.com>
> > Signed-off-by: Jacob Pan<jacob.jun.pan@linux.intel.com>
> > ---
> > v2: Add clflush to PASID directory update case (Baolu, Kevin review)
> > ---
> > drivers/iommu/intel/iommu.c | 2 ++
> > drivers/iommu/intel/pasid.c | 2 ++
> > 2 files changed, 4 insertions(+)
> >
> > diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
> > index 59df7e42fd53..161342e7149d 100644
> > --- a/drivers/iommu/intel/iommu.c
> > +++ b/drivers/iommu/intel/iommu.c
> > @@ -1976,6 +1976,8 @@ static int domain_context_mapping_one(struct
> > dmar_domain *domain, pds = context_get_sm_pds(table);
> > context->lo = (u64)virt_to_phys(table->table) |
> > context_pdts(pds);
> > + if (!ecap_coherent(iommu->ecap))
> > + clflush_cache_range(table->table,
> > sizeof(u64));
>
> This leaves other pasid dir entries not clflush'ed. It is possible that
> IOMMU hardware sees different value from what CPU has set. This may
> leave security holes for malicious devices. It's same to the pasid entry
> table.
agreed, we need to address security and functional aspects. good point.
thanks
Jacob
> How about below change? It does clflush whenever CPU changes the pasid
> dir/entry tables.
>
> diff --git a/drivers/iommu/intel/pasid.c b/drivers/iommu/intel/pasid.c
> index fb3c7020028d..aeb0517826a2 100644
> --- a/drivers/iommu/intel/pasid.c
> +++ b/drivers/iommu/intel/pasid.c
> @@ -128,6 +128,9 @@ int intel_pasid_alloc_table(struct device *dev)
> pasid_table->max_pasid = 1 << (order + PAGE_SHIFT + 3);
> info->pasid_table = pasid_table;
>
> + if (!ecap_coherent(info->iommu->ecap))
> + clflush_cache_range(pasid_table->table, size);
> +
> return 0;
> }
>
> @@ -215,6 +218,11 @@ static struct pasid_entry
> *intel_pasid_get_entry(struct device *dev, u32 pasid)
> free_pgtable_page(entries);
> goto retry;
> }
> +
> + if (!ecap_coherent(info->iommu->ecap)) {
> + clflush_cache_range(entries, VTD_PAGE_SIZE);
> + clflush_cache_range(&dir[dir_index].val,
> sizeof(*dir));
> + }
> }
>
> return &entries[index];
>
> Best regards,
> baolu
Thanks,
Jacob
prev parent reply other threads:[~2023-02-08 16:32 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-08 0:09 [PATCH v2] iommu/vt-d: Fix PASID directory pointer coherency Jacob Pan
2023-02-08 3:46 ` Baolu Lu
2023-02-08 16:35 ` Jacob Pan [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230208083536.3d8f5f7a@jacob-builder \
--to=jacob.jun.pan@linux.intel.com \
--cc=ashok.raj@intel.com \
--cc=baolu.lu@linux.intel.com \
--cc=dwmw2@infradead.org \
--cc=iommu@lists.linux.dev \
--cc=joro@8bytes.org \
--cc=kevin.tian@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=robin.murphy@arm.com \
--cc=stable@vger.kernel.org \
--cc=sukumar.ghorai@intel.com \
--cc=will@kernel.org \
--cc=yi.l.liu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox