From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: linux-kselftest@vger.kernel.org, linux-kernel@vger.kernel.org,
Reinette Chatre <reinette.chatre@intel.com>,
Fenghua Yu <fenghua.yu@intel.com>, Shuah Khan <shuah@kernel.org>,
Babu Moger <babu.moger@amd.com>,
Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Subject: [PATCH 3/4] selftests/resctrl: Allow ->setup() to return errors
Date: Wed, 8 Feb 2023 11:30:15 +0200 [thread overview]
Message-ID: <20230208093016.20670-4-ilpo.jarvinen@linux.intel.com> (raw)
In-Reply-To: <20230208093016.20670-1-ilpo.jarvinen@linux.intel.com>
Currently resctrl_val() assumes ->setup() always returns either 0 to
continue tests or < 0 in case of the normal termination of tests after
x runs. The latter overlaps with normal error returns.
Define END_OF_TESTS (=1) to differentiate the normal termination of
tests and return errors as negative values. Alter callers of ->setup()
to handle errors properly.
Fixes: 790bf585b0ee ("selftests/resctrl: Add Cache Allocation Technology (CAT) selftest")
Fixes: ecdbb911f22d ("selftests/resctrl: Add MBM test")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
tools/testing/selftests/resctrl/cache.c | 4 +++-
tools/testing/selftests/resctrl/cat_test.c | 2 +-
tools/testing/selftests/resctrl/cmt_test.c | 2 +-
tools/testing/selftests/resctrl/mba_test.c | 2 +-
tools/testing/selftests/resctrl/mbm_test.c | 2 +-
tools/testing/selftests/resctrl/resctrl.h | 2 ++
tools/testing/selftests/resctrl/resctrl_val.c | 4 +++-
7 files changed, 12 insertions(+), 6 deletions(-)
diff --git a/tools/testing/selftests/resctrl/cache.c b/tools/testing/selftests/resctrl/cache.c
index 68ff856d36f0..0485863a169f 100644
--- a/tools/testing/selftests/resctrl/cache.c
+++ b/tools/testing/selftests/resctrl/cache.c
@@ -244,10 +244,12 @@ int cat_val(struct resctrl_val_param *param)
while (1) {
if (!strncmp(resctrl_val, CAT_STR, sizeof(CAT_STR))) {
ret = param->setup(1, param);
- if (ret) {
+ if (ret == END_OF_TESTS) {
ret = 0;
break;
}
+ if (ret < 0)
+ break;
ret = reset_enable_llc_perf(bm_pid, param->cpu_no);
if (ret)
break;
diff --git a/tools/testing/selftests/resctrl/cat_test.c b/tools/testing/selftests/resctrl/cat_test.c
index 1c5e90c63254..2d3c7c77ab6c 100644
--- a/tools/testing/selftests/resctrl/cat_test.c
+++ b/tools/testing/selftests/resctrl/cat_test.c
@@ -40,7 +40,7 @@ static int cat_setup(int num, ...)
/* Run NUM_OF_RUNS times */
if (p->num_of_runs >= NUM_OF_RUNS)
- return -1;
+ return END_OF_TESTS;
if (p->num_of_runs == 0) {
sprintf(schemata, "%lx", p->mask);
diff --git a/tools/testing/selftests/resctrl/cmt_test.c b/tools/testing/selftests/resctrl/cmt_test.c
index 8968e36db99d..3b0454e7fc82 100644
--- a/tools/testing/selftests/resctrl/cmt_test.c
+++ b/tools/testing/selftests/resctrl/cmt_test.c
@@ -32,7 +32,7 @@ static int cmt_setup(int num, ...)
/* Run NUM_OF_RUNS times */
if (p->num_of_runs >= NUM_OF_RUNS)
- return -1;
+ return END_OF_TESTS;
p->num_of_runs++;
diff --git a/tools/testing/selftests/resctrl/mba_test.c b/tools/testing/selftests/resctrl/mba_test.c
index 1a1bdb6180cf..f32289ae17ae 100644
--- a/tools/testing/selftests/resctrl/mba_test.c
+++ b/tools/testing/selftests/resctrl/mba_test.c
@@ -41,7 +41,7 @@ static int mba_setup(int num, ...)
return 0;
if (allocation < ALLOCATION_MIN || allocation > ALLOCATION_MAX)
- return -1;
+ return END_OF_TESTS;
sprintf(allocation_str, "%d", allocation);
diff --git a/tools/testing/selftests/resctrl/mbm_test.c b/tools/testing/selftests/resctrl/mbm_test.c
index 8392e5c55ed0..280187628054 100644
--- a/tools/testing/selftests/resctrl/mbm_test.c
+++ b/tools/testing/selftests/resctrl/mbm_test.c
@@ -95,7 +95,7 @@ static int mbm_setup(int num, ...)
/* Run NUM_OF_RUNS times */
if (num_of_runs++ >= NUM_OF_RUNS)
- return -1;
+ return END_OF_TESTS;
va_start(param, num);
p = va_arg(param, struct resctrl_val_param *);
diff --git a/tools/testing/selftests/resctrl/resctrl.h b/tools/testing/selftests/resctrl/resctrl.h
index f0ded31fb3c7..f44fa2de4d98 100644
--- a/tools/testing/selftests/resctrl/resctrl.h
+++ b/tools/testing/selftests/resctrl/resctrl.h
@@ -37,6 +37,8 @@
#define ARCH_INTEL 1
#define ARCH_AMD 2
+#define END_OF_TESTS 1
+
#define PARENT_EXIT(err_msg) \
do { \
perror(err_msg); \
diff --git a/tools/testing/selftests/resctrl/resctrl_val.c b/tools/testing/selftests/resctrl/resctrl_val.c
index 787546a52849..00864242d76c 100644
--- a/tools/testing/selftests/resctrl/resctrl_val.c
+++ b/tools/testing/selftests/resctrl/resctrl_val.c
@@ -735,10 +735,12 @@ int resctrl_val(char **benchmark_cmd, struct resctrl_val_param *param)
/* Test runs until the callback setup() tells the test to stop. */
while (1) {
ret = param->setup(1, param);
- if (ret) {
+ if (ret == END_OF_TESTS) {
ret = 0;
break;
}
+ if (ret < 0)
+ break;
if (!strncmp(resctrl_val, MBM_STR, sizeof(MBM_STR)) ||
!strncmp(resctrl_val, MBA_STR, sizeof(MBA_STR))) {
--
2.30.2
next prev parent reply other threads:[~2023-02-08 9:31 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-08 9:30 [PATCH 0/4] selftests/resctrl: Fixes to error handling logic Ilpo Järvinen
2023-02-08 9:30 ` [PATCH 1/4] selftests/resctrl: Return error if memory is not allocated Ilpo Järvinen
2023-02-14 1:00 ` Reinette Chatre
2023-02-14 9:32 ` Ilpo Järvinen
2023-02-14 17:01 ` Reinette Chatre
2023-02-08 9:30 ` [PATCH 2/4] selftests/resctrl: Move ->setup() call outside of test specific branches Ilpo Järvinen
2023-02-08 9:30 ` Ilpo Järvinen [this message]
2023-02-08 9:30 ` [PATCH 4/4] selftests/resctrl: Check for return value after write_schemata() Ilpo Järvinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230208093016.20670-4-ilpo.jarvinen@linux.intel.com \
--to=ilpo.jarvinen@linux.intel.com \
--cc=babu.moger@amd.com \
--cc=fenghua.yu@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=reinette.chatre@intel.com \
--cc=sai.praneeth.prakhya@intel.com \
--cc=shuah@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).