[PATCH] Fix Flooding: Disable by default on User ports and Enable on CPU ports

[Richard van Schagen <richard@routerhints.com>]

---
 drivers/net/dsa/mt7530.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index f98a94361c84..f456541a68bc 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -997,6 +997,7 @@ mt753x_cpu_port_enable(struct dsa_switch *ds, int port)
 {
 	struct mt7530_priv *priv = ds->priv;
 	int ret;
+	u32 val;
 
 	/* Setup max capability of CPU port at first */
 	if (priv->info->cpu_port_config) {
@@ -1009,9 +1010,10 @@ mt753x_cpu_port_enable(struct dsa_switch *ds, int port)
 	mt7530_write(priv, MT7530_PVC_P(port),
 		     PORT_SPEC_TAG);
 
-	/* Disable flooding by default */
-	mt7530_rmw(priv, MT7530_MFC, BC_FFP_MASK | UNM_FFP_MASK | UNU_FFP_MASK,
-		   BC_FFP(BIT(port)) | UNM_FFP(BIT(port)) | UNU_FFP(BIT(port)));
+	/* Enable flooding on CPU */
+	val = mt7530_read(priv, MT7530_MFC);
+	val |= BC_FFP(BIT(port)) | UNM_FFP(BIT(port)) | UNU_FFP(BIT(port));
+	mt7530_write(priv, MT7530_MFC, val);
 
 	/* Set CPU port number */
 	if (priv->id == ID_MT7621)
@@ -2155,6 +2157,9 @@ mt7530_setup(struct dsa_switch *ds)
 
 	priv->p6_interface = PHY_INTERFACE_MODE_NA;
 
+	/* Disable flooding by default */
+	mt7530_rmw(priv, MT7530_MFC, BC_FFP_MASK | UNM_FFP_MASK | UNU_FFP_MASK, 0);
+
 	/* Enable and reset MIB counters */
 	mt7530_mib_reset(ds);
 
@@ -2346,6 +2351,9 @@ mt7531_setup(struct dsa_switch *ds)
 	mt7530_rmw(priv, MT753X_BPC, MT753X_BPDU_PORT_FW_MASK,
 		   MT753X_BPDU_CPU_ONLY);
 
+	/* Disable flooding by default */
+	mt7530_rmw(priv, MT7530_MFC, BC_FFP_MASK | UNM_FFP_MASK | UNU_FFP_MASK, 0);
+
 	/* Enable and reset MIB counters */
 	mt7530_mib_reset(ds);
 
-- 
2.30.2