From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org
Cc: Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>,
Takashi Iwai <tiwai@suse.com>
Subject: [PATCH v1 1/1] ASoC: soc-ac97: Convert to agnostic GPIO API
Date: Mon, 13 Feb 2023 18:17:13 +0200 [thread overview]
Message-ID: <20230213161713.1450-1-andriy.shevchenko@linux.intel.com> (raw)
The of_gpio.h is going to be removed. In preparation of that convert
the driver to the agnostic API.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
sound/soc/soc-ac97.c | 68 ++++++++++++++------------------------------
1 file changed, 22 insertions(+), 46 deletions(-)
diff --git a/sound/soc/soc-ac97.c b/sound/soc/soc-ac97.c
index 32c5be61e2ec..40051f513c6a 100644
--- a/sound/soc/soc-ac97.c
+++ b/sound/soc/soc-ac97.c
@@ -14,10 +14,9 @@
#include <linux/ctype.h>
#include <linux/delay.h>
#include <linux/export.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/gpio/driver.h>
#include <linux/init.h>
-#include <linux/of_gpio.h>
#include <linux/of.h>
#include <linux/pinctrl/consumer.h>
#include <linux/slab.h>
@@ -29,9 +28,9 @@ struct snd_ac97_reset_cfg {
struct pinctrl_state *pstate_reset;
struct pinctrl_state *pstate_warm_reset;
struct pinctrl_state *pstate_run;
- int gpio_sdata;
- int gpio_sync;
- int gpio_reset;
+ struct gpio_desc *reset_gpio;
+ struct gpio_desc *sdata_gpio;
+ struct gpio_desc *sync_gpio;
};
static struct snd_ac97_bus soc_ac97_bus = {
@@ -268,11 +267,11 @@ static void snd_soc_ac97_warm_reset(struct snd_ac97 *ac97)
pinctrl_select_state(pctl, snd_ac97_rst_cfg.pstate_warm_reset);
- gpio_direction_output(snd_ac97_rst_cfg.gpio_sync, 1);
+ gpiod_direction_output_raw(snd_ac97_rst_cfg.sync_gpio, 1);
udelay(10);
- gpio_direction_output(snd_ac97_rst_cfg.gpio_sync, 0);
+ gpiod_direction_output_raw(snd_ac97_rst_cfg.sync_gpio, 0);
pinctrl_select_state(pctl, snd_ac97_rst_cfg.pstate_run);
msleep(2);
@@ -284,13 +283,13 @@ static void snd_soc_ac97_reset(struct snd_ac97 *ac97)
pinctrl_select_state(pctl, snd_ac97_rst_cfg.pstate_reset);
- gpio_direction_output(snd_ac97_rst_cfg.gpio_sync, 0);
- gpio_direction_output(snd_ac97_rst_cfg.gpio_sdata, 0);
- gpio_direction_output(snd_ac97_rst_cfg.gpio_reset, 0);
+ gpiod_direction_output_raw(snd_ac97_rst_cfg.sync_gpio, 0);
+ gpiod_direction_output_raw(snd_ac97_rst_cfg.sdata_gpio, 0);
+ gpiod_direction_output_raw(snd_ac97_rst_cfg.reset_gpio, 0);
udelay(10);
- gpio_direction_output(snd_ac97_rst_cfg.gpio_reset, 1);
+ gpiod_direction_output_raw(snd_ac97_rst_cfg.reset_gpio, 1);
pinctrl_select_state(pctl, snd_ac97_rst_cfg.pstate_run);
msleep(2);
@@ -301,8 +300,6 @@ static int snd_soc_ac97_parse_pinctl(struct device *dev,
{
struct pinctrl *p;
struct pinctrl_state *state;
- int gpio;
- int ret;
p = devm_pinctrl_get(dev);
if (IS_ERR(p)) {
@@ -332,41 +329,20 @@ static int snd_soc_ac97_parse_pinctl(struct device *dev,
}
cfg->pstate_run = state;
- gpio = of_get_named_gpio(dev->of_node, "ac97-gpios", 0);
- if (gpio < 0) {
- dev_err(dev, "Can't find ac97-sync gpio\n");
- return gpio;
- }
- ret = devm_gpio_request(dev, gpio, "AC97 link sync");
- if (ret) {
- dev_err(dev, "Failed requesting ac97-sync gpio\n");
- return ret;
- }
- cfg->gpio_sync = gpio;
+ cfg->sync_gpio = devm_gpiod_get_index(dev, "ac97", 0, GPIOD_ASIS);
+ if (IS_ERR(cfg->sync_gpio))
+ return dev_err_probe(dev, PTR_ERR(cfg->sync_gpio), "Can't find ac97-sync gpio\n");
+ gpiod_set_consumer_name(cfg->sync_gpio, "AC97 link sync");
- gpio = of_get_named_gpio(dev->of_node, "ac97-gpios", 1);
- if (gpio < 0) {
- dev_err(dev, "Can't find ac97-sdata gpio %d\n", gpio);
- return gpio;
- }
- ret = devm_gpio_request(dev, gpio, "AC97 link sdata");
- if (ret) {
- dev_err(dev, "Failed requesting ac97-sdata gpio\n");
- return ret;
- }
- cfg->gpio_sdata = gpio;
+ cfg->sdata_gpio = devm_gpiod_get_index(dev, "ac97", 1, GPIOD_ASIS);
+ if (IS_ERR(cfg->sdata_gpio))
+ return dev_err_probe(dev, PTR_ERR(cfg->sync_gpio), "Can't find ac97-sdata gpio\n");
+ gpiod_set_consumer_name(cfg->sdata_gpio, "AC97 link sdata");
- gpio = of_get_named_gpio(dev->of_node, "ac97-gpios", 2);
- if (gpio < 0) {
- dev_err(dev, "Can't find ac97-reset gpio\n");
- return gpio;
- }
- ret = devm_gpio_request(dev, gpio, "AC97 link reset");
- if (ret) {
- dev_err(dev, "Failed requesting ac97-reset gpio\n");
- return ret;
- }
- cfg->gpio_reset = gpio;
+ cfg->reset_gpio = devm_gpiod_get_index(dev, "ac97", 2, GPIOD_ASIS);
+ if (IS_ERR(cfg->reset_gpio))
+ return dev_err_probe(dev, PTR_ERR(cfg->sync_gpio), "Can't find ac97-reset gpio\n");
+ gpiod_set_consumer_name(cfg->reset_gpio, "AC97 link reset");
return 0;
}
--
2.39.1
next reply other threads:[~2023-02-13 16:16 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-13 16:17 Andy Shevchenko [this message]
2023-02-14 23:53 ` [PATCH v1 1/1] ASoC: soc-ac97: Convert to agnostic GPIO API Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230213161713.1450-1-andriy.shevchenko@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=perex@perex.cz \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox