From: Masahiro Yamada <masahiroy@kernel.org>
To: linux-kbuild@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, Ben Hutchings <ben@decadent.org.uk>,
Masahiro Yamada <masahiroy@kernel.org>,
Nathan Chancellor <nathan@kernel.org>,
Nick Desaulniers <ndesaulniers@google.com>,
Nicolas Schier <nicolas@fjasle.eu>
Subject: [PATCH v6 07/12] kbuild: deb-pkg: switch over to source format 3.0 (quilt)
Date: Wed, 15 Feb 2023 10:20:29 +0900 [thread overview]
Message-ID: <20230215012034.403356-7-masahiroy@kernel.org> (raw)
In-Reply-To: <20230215012034.403356-1-masahiroy@kernel.org>
Change the source format from "1.0" to "3.0 (quilt)" because it works
more cleanly.
All files except .config and debian/ go into the orig tarball.
Add a single patch, debian/patches/config, and delete the ugly
extend-diff-ignore patterns.
The debian tarball will be compressed into *.debian.tar.xz by default.
If you like to use a different compression mode, you can pass the
command line option, DPKG_FLAGS=-Zgzip, for example.
The orig tarball only supports gzip for now. The combination of
gzip and xz is somewhat clumsy, but it is not a practical problem.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
---
Changes in v6:
- Fix error when KCONFIG_CONFIG is set
Changes in v4:
- New patch
scripts/Makefile.package | 2 +-
scripts/package/mkdebian | 41 ++++++++++++++++++----------------------
2 files changed, 19 insertions(+), 24 deletions(-)
diff --git a/scripts/Makefile.package b/scripts/Makefile.package
index 80a96eb61426..5538deacb136 100644
--- a/scripts/Makefile.package
+++ b/scripts/Makefile.package
@@ -105,7 +105,7 @@ debian-orig: linux.tar.gz debian
PHONY += deb-pkg
deb-pkg: debian-orig
+dpkg-buildpackage -r$(KBUILD_PKG_ROOTCMD) -a$$(cat debian/arch) $(DPKG_FLAGS) \
- --build=source,binary --source-option=-sP -nc -us -uc
+ --build=source,binary -nc -us -uc
PHONY += bindeb-pkg
bindeb-pkg: debian
diff --git a/scripts/package/mkdebian b/scripts/package/mkdebian
index 534e9713761a..22fc73a5e4f2 100755
--- a/scripts/package/mkdebian
+++ b/scripts/package/mkdebian
@@ -135,29 +135,24 @@ else
fi
mkdir -p debian/source/
-echo "1.0" > debian/source/format
-
-# Ugly: ignore anything except .config or debian/
-cat<<'EOF' > debian/source/local-options
-diff-ignore
-
-extend-diff-ignore = ^[^.d]
-
-extend-diff-ignore = ^\.[^c]
-extend-diff-ignore = ^\.c($|[^o])
-extend-diff-ignore = ^\.co($|[^n])
-extend-diff-ignore = ^\.con($|[^f])
-extend-diff-ignore = ^\.conf($|[^i])
-extend-diff-ignore = ^\.confi($|[^g])
-extend-diff-ignore = ^\.config.
-
-extend-diff-ignore = ^d($|[^e])
-extend-diff-ignore = ^de($|[^b])
-extend-diff-ignore = ^deb($|[^i])
-extend-diff-ignore = ^debi($|[^a])
-extend-diff-ignore = ^debia($|[^n])
-extend-diff-ignore = ^debian[^/]
-EOF
+echo "3.0 (quilt)" > debian/source/format
+
+{
+ echo "diff-ignore"
+ echo "extend-diff-ignore = .*"
+} > debian/source/local-options
+
+# Add .config as a patch
+mkdir -p debian/patches
+{
+ echo "Subject: Add .config"
+ echo "Author: ${maintainer}"
+ echo
+ echo "--- /dev/null"
+ echo "+++ linux/.config"
+ diff -u /dev/null "${KCONFIG_CONFIG}" | tail -n +3
+} > debian/patches/config
+echo config > debian/patches/series
echo $debarch > debian/arch
extra_build_depends=", $(if_enabled_echo CONFIG_UNWINDER_ORC libelf-dev:native)"
--
2.34.1
next prev parent reply other threads:[~2023-02-15 1:22 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-15 1:20 [PATCH v6 01/12] kbuild: add a tool to list files ignored by git Masahiro Yamada
2023-02-15 1:20 ` [PATCH v6 02/12] kbuild: deb-pkg: create source package without cleaning Masahiro Yamada
2023-02-24 22:28 ` Nicolas Schier
2023-02-15 1:20 ` [PATCH v6 03/12] kbuild: rpm-pkg: build binary packages from source rpm Masahiro Yamada
2023-02-15 1:20 ` [PATCH v6 04/12] kbuild: srcrpm-pkg: create source package without cleaning Masahiro Yamada
2023-02-15 1:20 ` [PATCH v6 05/12] kbuild: deb-pkg: hide KDEB_SOURCENAME from Makefile Masahiro Yamada
2023-02-24 22:33 ` Nicolas Schier
2023-02-15 1:20 ` [PATCH v6 06/12] kbuild: deb-pkg: make .orig tarball a hard link if possible Masahiro Yamada
2023-02-24 22:37 ` Nicolas Schier
2023-02-15 1:20 ` Masahiro Yamada [this message]
2023-02-24 22:42 ` [PATCH v6 07/12] kbuild: deb-pkg: switch over to source format 3.0 (quilt) Nicolas Schier
2023-02-25 8:54 ` Masahiro Yamada
2023-02-15 1:20 ` [PATCH v6 08/12] kbuild: make perf-tar*-src-pkg work without relying on git Masahiro Yamada
2023-02-15 1:20 ` [PATCH v6 09/12] kbuild: tar-pkg: use tar rules in scripts/Makefile.package Masahiro Yamada
2023-02-15 1:20 ` [PATCH v6 10/12] kbuild: deb-pkg: fix binary-arch and clean in debian/rules Masahiro Yamada
2023-02-15 1:20 ` [PATCH v6 11/12] kbuild: deb-pkg: improve the usability of source package Masahiro Yamada
2023-03-08 12:29 ` Péter Ujfalusi
2023-03-08 17:01 ` Masahiro Yamada
2023-02-15 1:20 ` [PATCH v6 12/12] kbuild: add srcdeb-pkg target Masahiro Yamada
2023-02-24 22:48 ` Nicolas Schier
2023-02-25 10:14 ` Masahiro Yamada
2023-03-01 20:41 ` Nicolas Schier
2023-02-26 8:01 ` [PATCH v6 01/12] kbuild: add a tool to list files ignored by git Masahiro Yamada
2023-03-06 14:27 ` Nicolas Schier
2023-02-27 8:24 ` Rasmus Villemoes
2023-02-27 9:51 ` Masahiro Yamada
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230215012034.403356-7-masahiroy@kernel.org \
--to=masahiroy@kernel.org \
--cc=ben@decadent.org.uk \
--cc=linux-kbuild@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nathan@kernel.org \
--cc=ndesaulniers@google.com \
--cc=nicolas@fjasle.eu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox