Re: [PATCH v2] firmware: turris-mox-rwtm: Fix an error handling path in mox_get_board_info()

["Marek Behún" <kabel@kernel.org>]

On Wed, 15 Feb 2023 10:30:02 +0100
Christophe JAILLET <christophe.jaillet@wanadoo.fr> wrote:

> wait_for_completion_timeout() returns 0 if timed out, and positive (at
> least 1, or number of jiffies left till timeout) if completed.
> 
> In case of timeout, return -ETIMEDOUT.
> 
> Fixes: 389711b37493 ("firmware: Add Turris Mox rWTM firmware driver")
> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
> ---
> Compile tested only.
> 
> v2:
>    - Fix some other wait_for_completion_timeout() calls
> 
> ---
>  drivers/firmware/turris-mox-rwtm.c | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/firmware/turris-mox-rwtm.c b/drivers/firmware/turris-mox-rwtm.c
> index 6ea5789a89e2..d6fc37ba897d 100644
> --- a/drivers/firmware/turris-mox-rwtm.c
> +++ b/drivers/firmware/turris-mox-rwtm.c
> @@ -200,8 +200,8 @@ static int mox_get_board_info(struct mox_rwtm *rwtm)
>  		return ret;
>  
>  	ret = wait_for_completion_timeout(&rwtm->cmd_done, HZ / 2);
> -	if (ret < 0)
> -		return ret;
> +	if (ret == 0)
> +		return -ETIMEDOUT;
>  
>  	ret = mox_get_status(MBOX_CMD_BOARD_INFO, reply->retval);
>  	if (ret == -ENODATA) {
> @@ -236,8 +236,8 @@ static int mox_get_board_info(struct mox_rwtm *rwtm)
>  		return ret;
>  
>  	ret = wait_for_completion_timeout(&rwtm->cmd_done, HZ / 2);
> -	if (ret < 0)
> -		return ret;
> +	if (ret == 0)
> +		return -ETIMEDOUT;
>  
>  	ret = mox_get_status(MBOX_CMD_ECDSA_PUB_KEY, reply->retval);
>  	if (ret == -ENODATA) {
> @@ -275,8 +275,8 @@ static int check_get_random_support(struct mox_rwtm *rwtm)
>  		return ret;
>  
>  	ret = wait_for_completion_timeout(&rwtm->cmd_done, HZ / 2);
> -	if (ret < 0)
> -		return ret;
> +	if (ret == 0)
> +		return -ETIMEDOUT;
>  
>  	return mox_get_status(MBOX_CMD_GET_RANDOM, rwtm->reply.retval);
>  }

Reviewed-by: Marek Behún <kabel@kernel.org>