From: Angelo Compagnucci <angelo.compagnucci@gmail.com>
To: unlisted-recipients:; (no To-header on input)
Cc: Angelo Compagnucci <angelo@amarulasolutions.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
linux-pwm@vger.kernel.org (open list:GENERIC PWM SERVO DRIVER),
devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
FLATTENED DEVICE TREE BINDINGS),
linux-kernel@vger.kernel.org (open list)
Subject: [PATCH v3 3/3] dt-bindings: misc: servo-pwm: Add new bindings for servo-pwm
Date: Fri, 17 Feb 2023 17:10:37 +0100 [thread overview]
Message-ID: <20230217161038.3130053-3-angelo@amarulasolutions.com> (raw)
In-Reply-To: <20230217161038.3130053-1-angelo@amarulasolutions.com>
This binding describes the binding for controlling servo motors through
pwm.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
---
v2:
* Converted old txt to yaml
v3:
* Fixed errors rised by make dt_binding_check
.../devicetree/bindings/misc/servo-pwm.yaml | 57 +++++++++++++++++++
MAINTAINERS | 1 +
2 files changed, 58 insertions(+)
create mode 100644 Documentation/devicetree/bindings/misc/servo-pwm.yaml
diff --git a/Documentation/devicetree/bindings/misc/servo-pwm.yaml b/Documentation/devicetree/bindings/misc/servo-pwm.yaml
new file mode 100644
index 000000000000..73e81b939daf
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/servo-pwm.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/servo-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Servo motor connected to PWM
+
+maintainers:
+ - Angelo Compagnucci <angelo@amarulasolutions.com>
+
+description:
+ Each servo is represented as a servo-pwm device.
+ The 20ms period is the accepted standard and so most of the motors
+ support it, while the positioning min/max duty cycle or the motor
+ degrees aperture vary lot between manufacturers.
+ The most common type of servo (SG90) has 180 degrees of movement
+ and moves between 0.5ms and 2.5ms duty cycle.
+
+properties:
+ compatible:
+ const: servo-pwm
+
+ pwms:
+ maxItems: 1
+
+ pwm-names: true
+
+ degrees:
+ description:
+ How many degrees the motor can move.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ duty-min:
+ description:
+ Duty cycle for position the motor at 0 degrees.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ duty-max:
+ description:
+ Duty cycle for positioning the motor at "degrees" angle.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+additionalProperties: false
+
+examples:
+ - |
+
+ servo: servo@0 {
+ compatible = "servo-pwm";
+ pwms = <&pwm 0 20000000 0>;
+ degrees = <180>;
+ duty-min = <500000>;
+ duty-max = <2500000>;
+ };
+
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index 356daea0861d..8f41daee62fc 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8742,6 +8742,7 @@ M: "Angelo Compagnucci" <angelo@amarulasolutions.com>
L: linux-pwm@vger.kernel.org
S: Maintained
F: Documentation/ABI/testing/sysfs-driver-servo-pwm
+F: Documentation/devicetree/bindings/misc/servo-pwm.yaml
F: drivers/misc/servo-pwm.c
GENERIC RESISTIVE TOUCHSCREEN ADC DRIVER
--
2.34.1
next prev parent reply other threads:[~2023-02-17 16:11 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-17 16:10 [PATCH v3 1/3] misc: servo-pwm: driver for controlling servo motors via PWM Angelo Compagnucci
2023-02-17 16:10 ` [PATCH v3 2/3] misc: servo-pwm: Add sysfs entries to control motor angle Angelo Compagnucci
2023-02-17 16:10 ` Angelo Compagnucci [this message]
2023-02-17 17:29 ` [PATCH v3 3/3] dt-bindings: misc: servo-pwm: Add new bindings for servo-pwm Rob Herring
2023-02-18 10:16 ` Krzysztof Kozlowski
2023-02-17 21:12 ` [PATCH v3 1/3] misc: servo-pwm: driver for controlling servo motors via PWM kernel test robot
2023-02-17 21:22 ` kernel test robot
2023-02-20 11:40 ` Thierry Reding
2023-02-20 11:46 ` Angelo Compagnucci
2023-07-15 19:17 ` Uwe Kleine-König
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230217161038.3130053-3-angelo@amarulasolutions.com \
--to=angelo.compagnucci@gmail.com \
--cc=angelo@amarulasolutions.com \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox