[PATCH] arm64: dts: imx8mp-msc-sm2s: Add sound card

[PATCH] arm64: dts: imx8mp-msc-sm2s: Add sound card

[Luca Ceresoli]

The MSC SM2-MB-EP1 carrier board for the SM2S-IMX8PLUS SMARC module has an
NXPP SGTL5000 audio codec connected to I2S-0 (sai2).

This requires to:

 * add the power supplies (always on)
 * enable sai2 with pinmuxes
 * reparent the CLKOUT1 clock that feeds the codec SYS_MCLK to
   IMX8MP_CLK_24M in order it to generate an accurate 24 MHz rate

Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
---
 .../dts/freescale/imx8mp-msc-sm2s-ep1.dts     | 60 +++++++++++++++++++
 1 file changed, 60 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
index 470ff8e31e32..894d9809f76d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
@@ -14,6 +14,57 @@ / {
 	compatible = "avnet,sm2s-imx8mp-14N0600E-ep1",
 		     "avnet,sm2s-imx8mp-14N0600E", "avnet,sm2s-imx8mp",
 		     "fsl,imx8mp";
+
+	reg_vcc_3v3_audio: 3v3_audio_regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3_AUD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_vcc_1v8_audio: 1v8_audio_regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8_AUD";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	sgtl5000-sound {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "imx-sgtl5000";
+		audio-cpu = <&sai2>;
+		audio-codec = <&sgtl5000_codec>;
+	};
+};
+
+&i2c1 {
+	sgtl5000_codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+
+		assigned-clocks = <&clk IMX8MP_CLK_CLKOUT1_SEL>;
+		assigned-clock-parents = <&clk IMX8MP_CLK_24M>;
+		assigned-clock-rates = <24000000>;
+		clocks = <&clk IMX8MP_CLK_CLKOUT1>;
+		clock-names = "mclk";
+
+		VDDA-supply  = <&reg_vcc_3v3_audio>;
+		VDDD-supply  = <&reg_vcc_1v8_audio>;
+		VDDIO-supply = <&reg_vcc_1v8_audio>;
+	};
+};
+
+/* I2S-0 = sai2 */
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+
+	assigned-clocks = <&clk IMX8MP_CLK_SAI2>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <12288000>;
+
+	fsl,sai-mclk-direction-output;
+	status = "okay";
 };
 
 &flexcan1 {
@@ -49,4 +100,13 @@ pinctrl_smarc_gpio: smarcgpiosgrp {
 			<MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19	0x19>, /* GPIO12 */
 			<MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00	0x19>; /* GPIO13 */
 	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC   0xd6
+			MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK    0xd6
+			MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI2_RX_DATA00 0xd6
+			MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00 0xd6
+		>;
+	};
 };
-- 
2.34.1

Re: [PATCH] arm64: dts: imx8mp-msc-sm2s: Add sound card

[Marco Felsch]

Hi Luca,

On 23-02-22, Luca Ceresoli wrote:
> The MSC SM2-MB-EP1 carrier board for the SM2S-IMX8PLUS SMARC module has an
> NXPP SGTL5000 audio codec connected to I2S-0 (sai2).
> 
> This requires to:
> 
>  * add the power supplies (always on)
>  * enable sai2 with pinmuxes
>  * reparent the CLKOUT1 clock that feeds the codec SYS_MCLK to
>    IMX8MP_CLK_24M in order it to generate an accurate 24 MHz rate
> 
> Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
> ---
>  .../dts/freescale/imx8mp-msc-sm2s-ep1.dts     | 60 +++++++++++++++++++
>  1 file changed, 60 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
> index 470ff8e31e32..894d9809f76d 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
> @@ -14,6 +14,57 @@ / {
>  	compatible = "avnet,sm2s-imx8mp-14N0600E-ep1",
>  		     "avnet,sm2s-imx8mp-14N0600E", "avnet,sm2s-imx8mp",
>  		     "fsl,imx8mp";

...

> +/* I2S-0 = sai2 */
> +&sai2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_sai2>;
> +
> +	assigned-clocks = <&clk IMX8MP_CLK_SAI2>;
> +	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
> +	assigned-clock-rates = <12288000>;
> +
> +	fsl,sai-mclk-direction-output;
> +	status = "okay";
>  };

Do you have some downstream patches for the sai interfaces? AFAIR Marek
worked on this but the patches are not mainlien yet.

Regards,
  Marco

Re: [PATCH] arm64: dts: imx8mp-msc-sm2s: Add sound card

[Marek Vasut]

On 2/22/23 18:59, Marco Felsch wrote:
> Hi Luca,
> 
> On 23-02-22, Luca Ceresoli wrote:
>> The MSC SM2-MB-EP1 carrier board for the SM2S-IMX8PLUS SMARC module has an
>> NXPP SGTL5000 audio codec connected to I2S-0 (sai2).
>>
>> This requires to:
>>
>>   * add the power supplies (always on)
>>   * enable sai2 with pinmuxes
>>   * reparent the CLKOUT1 clock that feeds the codec SYS_MCLK to
>>     IMX8MP_CLK_24M in order it to generate an accurate 24 MHz rate
>>
>> Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
>> ---
>>   .../dts/freescale/imx8mp-msc-sm2s-ep1.dts     | 60 +++++++++++++++++++
>>   1 file changed, 60 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
>> index 470ff8e31e32..894d9809f76d 100644
>> --- a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
>> +++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
>> @@ -14,6 +14,57 @@ / {
>>   	compatible = "avnet,sm2s-imx8mp-14N0600E-ep1",
>>   		     "avnet,sm2s-imx8mp-14N0600E", "avnet,sm2s-imx8mp",
>>   		     "fsl,imx8mp";
> 
> ...
> 
>> +/* I2S-0 = sai2 */
>> +&sai2 {
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&pinctrl_sai2>;
>> +
>> +	assigned-clocks = <&clk IMX8MP_CLK_SAI2>;
>> +	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
>> +	assigned-clock-rates = <12288000>;
>> +
>> +	fsl,sai-mclk-direction-output;
>> +	status = "okay";
>>   };
> 
> Do you have some downstream patches for the sai interfaces? AFAIR Marek
> worked on this but the patches are not mainlien yet.

I guess it is time to resubmit these.

Re: [PATCH] arm64: dts: imx8mp-msc-sm2s: Add sound card

[Marco Felsch]

On 23-02-22, Marek Vasut wrote:
> On 2/22/23 18:59, Marco Felsch wrote:
> > Hi Luca,
> > 
> > On 23-02-22, Luca Ceresoli wrote:
> > > The MSC SM2-MB-EP1 carrier board for the SM2S-IMX8PLUS SMARC module has an
> > > NXPP SGTL5000 audio codec connected to I2S-0 (sai2).
> > > 
> > > This requires to:
> > > 
> > >   * add the power supplies (always on)
> > >   * enable sai2 with pinmuxes
> > >   * reparent the CLKOUT1 clock that feeds the codec SYS_MCLK to
> > >     IMX8MP_CLK_24M in order it to generate an accurate 24 MHz rate
> > > 
> > > Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
> > > ---
> > >   .../dts/freescale/imx8mp-msc-sm2s-ep1.dts     | 60 +++++++++++++++++++
> > >   1 file changed, 60 insertions(+)
> > > 
> > > diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
> > > index 470ff8e31e32..894d9809f76d 100644
> > > --- a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
> > > +++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
> > > @@ -14,6 +14,57 @@ / {
> > >   	compatible = "avnet,sm2s-imx8mp-14N0600E-ep1",
> > >   		     "avnet,sm2s-imx8mp-14N0600E", "avnet,sm2s-imx8mp",
> > >   		     "fsl,imx8mp";
> > 
> > ...
> > 
> > > +/* I2S-0 = sai2 */
> > > +&sai2 {
> > > +	pinctrl-names = "default";
> > > +	pinctrl-0 = <&pinctrl_sai2>;
> > > +
> > > +	assigned-clocks = <&clk IMX8MP_CLK_SAI2>;
> > > +	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
> > > +	assigned-clock-rates = <12288000>;
> > > +
> > > +	fsl,sai-mclk-direction-output;
> > > +	status = "okay";
> > >   };
> > 
> > Do you have some downstream patches for the sai interfaces? AFAIR Marek
> > worked on this but the patches are not mainlien yet.
> 
> I guess it is time to resubmit these.

I would have two patches for your series first is necessary the other is
changing the sound-card to make use of the simple-audio-card.

Regards,
  Marco

8<-----------------------------------------------------------------------------------------
[1]

diff --git a/drivers/clk/imx/clk-imx8mp-audiomix.c b/drivers/clk/imx/clk-imx8mp-audiomix.c
index 2d5d8255c7fa2..32eb29ae8f71f 100644
--- a/drivers/clk/imx/clk-imx8mp-audiomix.c
+++ b/drivers/clk/imx/clk-imx8mp-audiomix.c
@@ -18,7 +18,7 @@
 
 #define CLKEN0                 0x000
 #define CLKEN1                 0x004
-#define SAI_MCLK_SEL(n)                (300 + 4 * (n)) /* n in 0..5 */
+#define SAI_MCLK_SEL(n)                (0x300 + 4 * (n))       /* n in 0..5 */
 #define PDM_SEL                        0x318
 #define SAI_PLL_GNRL_CTL       0x400

8<-----------------------------------------------------------------------------------------
[2]

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index 8547391d9cbbf..3b38ec7bb47be 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -47,7 +47,6 @@ reg_audio_pwr: regulator-audio-pwr {
 		regulator-max-microvolt = <3300000>;
 		gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
-		regulator-always-on;
 	};
 
 	reg_can1_stby: regulator-can1-stby {
@@ -94,21 +93,34 @@ reg_usdhc2_vmmc: regulator-usdhc2 {
 		enable-active-high;
 	};
 
-	sound-wm8960 {
-		compatible = "fsl,imx-audio-wm8960";
-		model = "wm8960-audio";
-		audio-cpu = <&sai3>;
-		audio-codec = <&codec>;
-		audio-routing =
+	sound-wm8524 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "wm8960-audio";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&cpudai>;
+		simple-audio-card,bitclock-master = <&cpudai>;
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Speaker", "External Speaker",
+			"Microphone", "Mic Jack";
+		simple-audio-card,routing =
 			"Headphone Jack", "HP_L",
 			"Headphone Jack", "HP_R",
-			"Ext Spk", "SPK_LP",
-			"Ext Spk", "SPK_LN",
-			"Ext Spk", "SPK_RP",
-			"Ext Spk", "SPK_RN",
+			"External Speaker", "SPK_LP",
+			"External Speaker", "SPK_LN",
+			"External Speaker", "SPK_RP",
+			"External Speaker", "SPK_RN",
 			"LINPUT1", "Mic Jack",
 			"LINPUT3", "Mic Jack",
 			"Mic Jack", "MICB";
+
+		cpudai: simple-audio-card,cpu {
+			sound-dai = <&sai3>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&wm8960>;
+		};
 	};
 };
 
@@ -364,7 +376,7 @@ &i2c3 {
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
 
-	codec: wm8960@1a {
+	wm8960: codec@1a {
 		compatible = "wlf,wm8960";
 		reg = <0x1a>;
 		clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>;
@@ -373,6 +385,7 @@ codec: wm8960@1a {
 		wlf,hp-cfg = <3 2 3>;
 		wlf,gpio-cfg = <1 3>;
 		SPKVDD1-supply = <&reg_audio_pwr>;
+		#sound-dai-cells = <0>;
 	};
 
 	pca6416: gpio@20 {
8<-----------------------------------------------------------------------------------------

Re: [PATCH] arm64: dts: imx8mp-msc-sm2s: Add sound card

[Marek Vasut]

On 2/22/23 20:02, Marco Felsch wrote:

Hi,

[...]

> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> index 8547391d9cbbf..3b38ec7bb47be 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> @@ -47,7 +47,6 @@ reg_audio_pwr: regulator-audio-pwr {
>   		regulator-max-microvolt = <3300000>;
>   		gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
>   		enable-active-high;
> -		regulator-always-on;
>   	};
>   
>   	reg_can1_stby: regulator-can1-stby {
> @@ -94,21 +93,34 @@ reg_usdhc2_vmmc: regulator-usdhc2 {
>   		enable-active-high;
>   	};
>   
> -	sound-wm8960 {
> -		compatible = "fsl,imx-audio-wm8960";
> -		model = "wm8960-audio";
> -		audio-cpu = <&sai3>;
> -		audio-codec = <&codec>;
> -		audio-routing =
> +	sound-wm8524 {

Why WM8524 ? The MX8MP EVK I have here is populated with WM8960 chip and 
with single headphone jack, are you sure the below is correct ?

[...]

Re: [PATCH] arm64: dts: imx8mp-msc-sm2s: Add sound card

[Marco Felsch]

On 23-02-23, Marek Vasut wrote:
> On 2/22/23 20:02, Marco Felsch wrote:
> 
> Hi,
> 
> [...]
> 
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> > index 8547391d9cbbf..3b38ec7bb47be 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> > +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> > @@ -47,7 +47,6 @@ reg_audio_pwr: regulator-audio-pwr {
> >   		regulator-max-microvolt = <3300000>;
> >   		gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
> >   		enable-active-high;
> > -		regulator-always-on;
> >   	};
> >   	reg_can1_stby: regulator-can1-stby {
> > @@ -94,21 +93,34 @@ reg_usdhc2_vmmc: regulator-usdhc2 {
> >   		enable-active-high;
> >   	};
> > -	sound-wm8960 {
> > -		compatible = "fsl,imx-audio-wm8960";
> > -		model = "wm8960-audio";
> > -		audio-cpu = <&sai3>;
> > -		audio-codec = <&codec>;
> > -		audio-routing =
> > +	sound-wm8524 {
> 
> Why WM8524 ? The MX8MP EVK I have here is populated with WM8960 chip and
> with single headphone jack, are you sure the below is correct ?

Argh.. the name was copied from 8MM evk dts but the below setup is
working, at least the audio-outpath. Didn't tested the mic path.

Regards,
  Marco

Re: [PATCH] arm64: dts: imx8mp-msc-sm2s: Add sound card

[Luca Ceresoli]

Hi Marco,

On Wed, 22 Feb 2023 18:59:41 +0100
Marco Felsch <m.felsch@pengutronix.de> wrote:

> Hi Luca,
> 
> On 23-02-22, Luca Ceresoli wrote:
> > The MSC SM2-MB-EP1 carrier board for the SM2S-IMX8PLUS SMARC module has an
> > NXPP SGTL5000 audio codec connected to I2S-0 (sai2).
> > 
> > This requires to:
> > 
> >  * add the power supplies (always on)
> >  * enable sai2 with pinmuxes
> >  * reparent the CLKOUT1 clock that feeds the codec SYS_MCLK to
> >    IMX8MP_CLK_24M in order it to generate an accurate 24 MHz rate
> > 
> > Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
> > ---
> >  .../dts/freescale/imx8mp-msc-sm2s-ep1.dts     | 60 +++++++++++++++++++
> >  1 file changed, 60 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
> > index 470ff8e31e32..894d9809f76d 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
> > +++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
> > @@ -14,6 +14,57 @@ / {
> >  	compatible = "avnet,sm2s-imx8mp-14N0600E-ep1",
> >  		     "avnet,sm2s-imx8mp-14N0600E", "avnet,sm2s-imx8mp",
> >  		     "fsl,imx8mp";  
> 
> ...
> 
> > +/* I2S-0 = sai2 */
> > +&sai2 {
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&pinctrl_sai2>;
> > +
> > +	assigned-clocks = <&clk IMX8MP_CLK_SAI2>;
> > +	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
> > +	assigned-clock-rates = <12288000>;
> > +
> > +	fsl,sai-mclk-direction-output;
> > +	status = "okay";
> >  };  
> 
> Do you have some downstream patches for the sai interfaces? AFAIR Marek
> worked on this but the patches are not mainlien yet.

Right, my patch is based on the v3 series by Marek, and it should be
threaded accordingly
(https://lore.kernel.org/linux-arm-kernel/20230222172552.1545519-1-luca.ceresoli@bootlin.com/),
but I realize I haven't made it 100% clear -- sorry about this.

I guess I should just resend separately with a clarifying cover letter
next time.

-- 
Luca Ceresoli, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Re: [PATCH] arm64: dts: imx8mp-msc-sm2s: Add sound card

[Krzysztof Kozlowski]

On 22/02/2023 18:25, Luca Ceresoli wrote:
> The MSC SM2-MB-EP1 carrier board for the SM2S-IMX8PLUS SMARC module has an
> NXPP SGTL5000 audio codec connected to I2S-0 (sai2).
> 
> This requires to:
> 
>  * add the power supplies (always on)
>  * enable sai2 with pinmuxes
>  * reparent the CLKOUT1 clock that feeds the codec SYS_MCLK to
>    IMX8MP_CLK_24M in order it to generate an accurate 24 MHz rate
> 
> Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
> ---
>  .../dts/freescale/imx8mp-msc-sm2s-ep1.dts     | 60 +++++++++++++++++++
>  1 file changed, 60 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
> index 470ff8e31e32..894d9809f76d 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
> @@ -14,6 +14,57 @@ / {
>  	compatible = "avnet,sm2s-imx8mp-14N0600E-ep1",
>  		     "avnet,sm2s-imx8mp-14N0600E", "avnet,sm2s-imx8mp",
>  		     "fsl,imx8mp";
> +
> +	reg_vcc_3v3_audio: 3v3_audio_regulator {

No underscores in node names.

> +		compatible = "regulator-fixed";
> +		regulator-name = "VCC_3V3_AUD";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +	};
> +
> +	reg_vcc_1v8_audio: 1v8_audio_regulator {
> +		compatible = "regulator-fixed";
> +		regulator-name = "VCC_1V8_AUD";
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;
> +	};
> +
> +	sgtl5000-sound {

Just: sound



Best regards,
Krzysztof

Re: [PATCH] arm64: dts: imx8mp-msc-sm2s: Add sound card

[kernel test robot]

Hi Luca,

I love your patch! Yet something to improve:

[auto build test ERROR on shawnguo/for-next]
[also build test ERROR on krzk/for-next krzk-dt/for-next linus/master v6.2 next-20230223]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Luca-Ceresoli/arm64-dts-imx8mp-msc-sm2s-Add-sound-card/20230223-012837
base:   https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git for-next
patch link:    https://lore.kernel.org/r/20230222172552.1545519-1-luca.ceresoli%40bootlin.com
patch subject: [PATCH] arm64: dts: imx8mp-msc-sm2s: Add sound card
config: arm64-defconfig (https://download.01.org/0day-ci/archive/20230223/202302231533.yOY5yoeD-lkp@intel.com/config)
compiler: aarch64-linux-gcc (GCC) 12.1.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/intel-lab-lkp/linux/commit/a5c4ed6f9f95285c0ec312f5293250a83ccfc5ce
        git remote add linux-review https://github.com/intel-lab-lkp/linux
        git fetch --no-tags linux-review Luca-Ceresoli/arm64-dts-imx8mp-msc-sm2s-Add-sound-card/20230223-012837
        git checkout a5c4ed6f9f95285c0ec312f5293250a83ccfc5ce
        # save the config file
        mkdir build_dir && cp config build_dir/.config
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=arm64 olddefconfig
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=arm64 SHELL=/bin/bash

If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <lkp@intel.com>
| Link: https://lore.kernel.org/oe-kbuild-all/202302231533.yOY5yoeD-lkp@intel.com/

All errors (new ones prefixed by >>):

>> Error: arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts:58.1-6 Label or path sai2 not found
>> FATAL ERROR: Syntax error parsing input tree

-- 
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests