From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Moises Cardona <moisesmcardona@gmail.com>,
Luiz Augusto von Dentz <luiz.von.dentz@intel.com>,
Sasha Levin <sashal@kernel.org>,
marcel@holtmann.org, johan.hedberg@gmail.com,
luiz.dentz@gmail.com, linux-bluetooth@vger.kernel.org
Subject: [PATCH AUTOSEL 5.15 33/36] Bluetooth: btusb: Add VID:PID 13d3:3529 for Realtek RTL8821CE
Date: Sun, 26 Feb 2023 09:48:41 -0500 [thread overview]
Message-ID: <20230226144845.827893-33-sashal@kernel.org> (raw)
In-Reply-To: <20230226144845.827893-1-sashal@kernel.org>
From: Moises Cardona <moisesmcardona@gmail.com>
[ Upstream commit 1eec3b95b5ce7fb2cdd273ac4f8b24b1ed6776a1 ]
This patch adds VID:PID 13d3:3529 to the btusb.c file.
This VID:PID is found in the Realtek RTL8821CE module
(M.2 module AW-CB304NF on an ASUS E210MA laptop)
Output of /sys/kernel/debug/usb/devices:
T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3529 Rev= 1.10
S: Manufacturer=Realtek
S: Product=Bluetooth Radio
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Moises Cardona <moisesmcardona@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/bluetooth/btusb.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 9c32263f872b9..9eb2267bd3a02 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -400,6 +400,10 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_VENDOR_AND_INTERFACE_INFO(0x8087, 0xe0, 0x01, 0x01),
.driver_info = BTUSB_IGNORE },
+ /* Realtek 8821CE Bluetooth devices */
+ { USB_DEVICE(0x13d3, 0x3529), .driver_info = BTUSB_REALTEK |
+ BTUSB_WIDEBAND_SPEECH },
+
/* Realtek 8822CE Bluetooth devices */
{ USB_DEVICE(0x0bda, 0xb00c), .driver_info = BTUSB_REALTEK |
BTUSB_WIDEBAND_SPEECH },
--
2.39.0
next prev parent reply other threads:[~2023-02-26 14:57 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-26 14:48 [PATCH AUTOSEL 5.15 01/36] wifi: ath9k: Fix use-after-free in ath9k_hif_usb_disconnect() Sasha Levin
2023-02-26 14:48 ` [PATCH AUTOSEL 5.15 02/36] wifi: brcmfmac: Fix potential stack-out-of-bounds in brcmf_c_preinit_dcmds() Sasha Levin
2023-02-26 14:48 ` [PATCH AUTOSEL 5.15 03/36] rcu: Make RCU_LOCKDEP_WARN() avoid early lockdep checks Sasha Levin
2023-02-26 14:48 ` [PATCH AUTOSEL 5.15 04/36] rcu: Suppress smp_processor_id() complaint in synchronize_rcu_expedited_wait() Sasha Levin
2023-02-26 14:48 ` [PATCH AUTOSEL 5.15 05/36] rcu-tasks: Make rude RCU-Tasks work well with CPU hotplug Sasha Levin
2023-02-26 14:48 ` [PATCH AUTOSEL 5.15 06/36] wifi: ath11k: debugfs: fix to work with multiple PCI devices Sasha Levin
2023-02-26 14:48 ` [PATCH AUTOSEL 5.15 07/36] thermal: intel: Fix unsigned comparison with less than zero Sasha Levin
2023-02-26 14:48 ` [PATCH AUTOSEL 5.15 08/36] timers: Prevent union confusion from unexpected restart_syscall() Sasha Levin
2023-02-26 14:48 ` [PATCH AUTOSEL 5.15 09/36] x86/bugs: Reset speculation control settings on init Sasha Levin
2023-02-26 14:48 ` [PATCH AUTOSEL 5.15 10/36] wifi: brcmfmac: ensure CLM version is null-terminated to prevent stack-out-of-bounds Sasha Levin
2023-02-26 14:48 ` [PATCH AUTOSEL 5.15 11/36] wifi: mt7601u: fix an integer underflow Sasha Levin
2023-02-26 14:48 ` [PATCH AUTOSEL 5.15 12/36] inet: fix fast path in __inet_hash_connect() Sasha Levin
2023-02-26 14:48 ` [PATCH AUTOSEL 5.15 13/36] ice: restrict PTP HW clock freq adjustments to 100, 000, 000 PPB Sasha Levin
2023-02-26 14:48 ` [PATCH AUTOSEL 5.15 14/36] ice: add missing checks for PF vsi type Sasha Levin
2023-02-26 14:48 ` [PATCH AUTOSEL 5.15 15/36] ACPI: Don't build ACPICA with '-Os' Sasha Levin
2023-02-26 14:48 ` [PATCH AUTOSEL 5.15 16/36] thermal: intel: intel_pch: Add support for Wellsburg PCH Sasha Levin
2023-02-26 14:48 ` [PATCH AUTOSEL 5.15 17/36] clocksource: Suspend the watchdog temporarily when high read latency detected Sasha Levin
2023-02-26 14:48 ` [PATCH AUTOSEL 5.15 18/36] crypto: hisilicon: Wipe entire pool on error Sasha Levin
2023-02-26 14:48 ` [PATCH AUTOSEL 5.15 19/36] netpoll: Remove 4s sleep during carrier detection Sasha Levin
2023-02-26 14:48 ` [PATCH AUTOSEL 5.15 20/36] net: bcmgenet: Add a check for oversized packets Sasha Levin
2023-02-26 14:48 ` [PATCH AUTOSEL 5.15 21/36] m68k: Check syscall_trace_enter() return code Sasha Levin
2023-02-26 14:48 ` [PATCH AUTOSEL 5.15 22/36] netfilter: nf_tables: NULL pointer dereference in nf_tables_updobj() Sasha Levin
2023-02-26 14:48 ` [PATCH AUTOSEL 5.15 23/36] tools/power/x86/intel-speed-select: Add Emerald Rapid quirk Sasha Levin
2023-02-26 14:48 ` [PATCH AUTOSEL 5.15 24/36] wifi: mt76: dma: free rx_head in mt76_dma_rx_cleanup Sasha Levin
2023-02-26 14:48 ` [PATCH AUTOSEL 5.15 25/36] ACPI: video: Fix Lenovo Ideapad Z570 DMI match Sasha Levin
2023-02-26 14:48 ` [PATCH AUTOSEL 5.15 26/36] net/mlx5: fw_tracer: Fix debug print Sasha Levin
2023-02-26 14:48 ` [PATCH AUTOSEL 5.15 27/36] coda: Avoid partial allocation of sig_inputArgs Sasha Levin
2023-02-26 14:48 ` [PATCH AUTOSEL 5.15 28/36] uaccess: Add minimum bounds check on kernel buffer size Sasha Levin
2023-02-26 14:48 ` [PATCH AUTOSEL 5.15 29/36] s390/idle: mark arch_cpu_idle() noinstr Sasha Levin
2023-02-26 14:48 ` [PATCH AUTOSEL 5.15 30/36] time/debug: Fix memory leak with using debugfs_lookup() Sasha Levin
2023-02-26 14:48 ` [PATCH AUTOSEL 5.15 31/36] PM: domains: fix " Sasha Levin
2023-02-26 14:48 ` [PATCH AUTOSEL 5.15 32/36] PM: EM: " Sasha Levin
2023-02-26 14:48 ` Sasha Levin [this message]
2023-02-26 14:48 ` [PATCH AUTOSEL 5.15 34/36] hv_netvsc: Check status in SEND_RNDIS_PKT completion message Sasha Levin
2023-02-26 14:48 ` [PATCH AUTOSEL 5.15 35/36] devlink: health: Fix nla_nest_end in error flow Sasha Levin
2023-02-26 14:48 ` [PATCH AUTOSEL 5.15 36/36] scm: add user copy checks to put_cmsg() Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230226144845.827893-33-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=johan.hedberg@gmail.com \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luiz.dentz@gmail.com \
--cc=luiz.von.dentz@intel.com \
--cc=marcel@holtmann.org \
--cc=moisesmcardona@gmail.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox