public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: 강신형 <s47.kang@samsung.com>, "Mark Brown" <broonie@kernel.org>,
	"Sasha Levin" <sashal@kernel.org>,
	vkoul@kernel.org, lgirdwood@gmail.com, perex@perex.cz,
	tiwai@suse.com, alsa-devel@alsa-project.org
Subject: [PATCH AUTOSEL 5.15 13/25] ASoC: soc-compress: Reposition and add pcm_mutex
Date: Sun, 26 Feb 2023 21:08:36 -0500	[thread overview]
Message-ID: <20230227020855.1051605-13-sashal@kernel.org> (raw)
In-Reply-To: <20230227020855.1051605-1-sashal@kernel.org>

From: 강신형 <s47.kang@samsung.com>

[ Upstream commit aa9ff6a4955fdba02b54fbc4386db876603703b7 ]

If panic_on_warn is set and compress stream(DPCM) is started,
then kernel panic occurred because card->pcm_mutex isn't held appropriately.
In the following functions, warning were issued at this line
"snd_soc_dpcm_mutex_assert_held".

static int dpcm_be_connect(struct snd_soc_pcm_runtime *fe,
		struct snd_soc_pcm_runtime *be, int stream)
{
	...
	snd_soc_dpcm_mutex_assert_held(fe);
	...
}

void dpcm_be_disconnect(struct snd_soc_pcm_runtime *fe, int stream)
{
	...
	snd_soc_dpcm_mutex_assert_held(fe);
	...
}

void snd_soc_runtime_action(struct snd_soc_pcm_runtime *rtd,
			    int stream, int action)
{
	...
	snd_soc_dpcm_mutex_assert_held(rtd);
	...
}

int dpcm_dapm_stream_event(struct snd_soc_pcm_runtime *fe, int dir,
	int event)
{
	...
	snd_soc_dpcm_mutex_assert_held(fe);
	...
}

These functions are called by soc_compr_set_params_fe, soc_compr_open_fe
and soc_compr_free_fe
without pcm_mutex locking. And this is call stack.

[  414.527841][ T2179] pc : dpcm_process_paths+0x5a4/0x750
[  414.527848][ T2179] lr : dpcm_process_paths+0x37c/0x750
[  414.527945][ T2179] Call trace:
[  414.527949][ T2179]  dpcm_process_paths+0x5a4/0x750
[  414.527955][ T2179]  soc_compr_open_fe+0xb0/0x2cc
[  414.527972][ T2179]  snd_compr_open+0x180/0x248
[  414.527981][ T2179]  snd_open+0x15c/0x194
[  414.528003][ T2179]  chrdev_open+0x1b0/0x220
[  414.528023][ T2179]  do_dentry_open+0x30c/0x594
[  414.528045][ T2179]  vfs_open+0x34/0x44
[  414.528053][ T2179]  path_openat+0x914/0xb08
[  414.528062][ T2179]  do_filp_open+0xc0/0x170
[  414.528068][ T2179]  do_sys_openat2+0x94/0x18c
[  414.528076][ T2179]  __arm64_sys_openat+0x78/0xa4
[  414.528084][ T2179]  invoke_syscall+0x48/0x10c
[  414.528094][ T2179]  el0_svc_common+0xbc/0x104
[  414.528099][ T2179]  do_el0_svc+0x34/0xd8
[  414.528103][ T2179]  el0_svc+0x34/0xc4
[  414.528125][ T2179]  el0t_64_sync_handler+0x8c/0xfc
[  414.528133][ T2179]  el0t_64_sync+0x1a0/0x1a4
[  414.528142][ T2179] Kernel panic - not syncing: panic_on_warn set ...

So, I reposition and add pcm_mutex to resolve lockdep error.

Signed-off-by: Shinhyung Kang <s47.kang@samsung.com>
Link: https://lore.kernel.org/r/016401d90ac4$7b6848c0$7238da40$@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/soc-compress.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/sound/soc/soc-compress.c b/sound/soc/soc-compress.c
index 2050728063a15..9146bec146c1e 100644
--- a/sound/soc/soc-compress.c
+++ b/sound/soc/soc-compress.c
@@ -116,6 +116,8 @@ static int soc_compr_open_fe(struct snd_compr_stream *cstream)
 	if (ret < 0)
 		goto be_err;
 
+	mutex_lock_nested(&fe->card->pcm_mutex, fe->card->pcm_subclass);
+
 	/* calculate valid and active FE <-> BE dpcms */
 	dpcm_process_paths(fe, stream, &list, 1);
 	fe->dpcm[stream].runtime = fe_substream->runtime;
@@ -151,7 +153,6 @@ static int soc_compr_open_fe(struct snd_compr_stream *cstream)
 	fe->dpcm[stream].state = SND_SOC_DPCM_STATE_OPEN;
 	fe->dpcm[stream].runtime_update = SND_SOC_DPCM_UPDATE_NO;
 
-	mutex_lock_nested(&fe->card->pcm_mutex, fe->card->pcm_subclass);
 	snd_soc_runtime_activate(fe, stream);
 	mutex_unlock(&fe->card->pcm_mutex);
 
@@ -182,7 +183,6 @@ static int soc_compr_free_fe(struct snd_compr_stream *cstream)
 
 	mutex_lock_nested(&fe->card->pcm_mutex, fe->card->pcm_subclass);
 	snd_soc_runtime_deactivate(fe, stream);
-	mutex_unlock(&fe->card->pcm_mutex);
 
 	fe->dpcm[stream].runtime_update = SND_SOC_DPCM_UPDATE_FE;
 
@@ -201,6 +201,8 @@ static int soc_compr_free_fe(struct snd_compr_stream *cstream)
 
 	dpcm_be_disconnect(fe, stream);
 
+	mutex_unlock(&fe->card->pcm_mutex);
+
 	fe->dpcm[stream].runtime = NULL;
 
 	snd_soc_link_compr_shutdown(cstream, 0);
@@ -376,8 +378,9 @@ static int soc_compr_set_params_fe(struct snd_compr_stream *cstream,
 	ret = snd_soc_link_compr_set_params(cstream);
 	if (ret < 0)
 		goto out;
-
+	mutex_lock_nested(&fe->card->pcm_mutex, fe->card->pcm_subclass);
 	dpcm_dapm_stream_event(fe, stream, SND_SOC_DAPM_STREAM_START);
+	mutex_unlock(&fe->card->pcm_mutex);
 	fe->dpcm[stream].state = SND_SOC_DPCM_STATE_PREPARE;
 
 out:
-- 
2.39.0


  parent reply	other threads:[~2023-02-27  2:44 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-02-27  2:08 [PATCH AUTOSEL 5.15 01/25] drm/amd/display: Revert Reduce delay when sink device not able to ACK 00340h write Sasha Levin
2023-02-27  2:08 ` [PATCH AUTOSEL 5.15 02/25] drm/amd/display: Fix potential null-deref in dm_resume Sasha Levin
2023-02-27  2:08 ` [PATCH AUTOSEL 5.15 03/25] drm/omap: dsi: Fix excessive stack usage Sasha Levin
2023-02-27  2:08 ` [PATCH AUTOSEL 5.15 04/25] HID: Add Mapping for System Microphone Mute Sasha Levin
2023-02-27  2:08 ` [PATCH AUTOSEL 5.15 05/25] drm/tiny: ili9486: Do not assume 8-bit only SPI controllers Sasha Levin
2023-02-27  2:08 ` [PATCH AUTOSEL 5.15 06/25] drm/radeon: free iio for atombios when driver shutdown Sasha Levin
2023-02-27  2:08 ` [PATCH AUTOSEL 5.15 07/25] scsi: lpfc: Fix use-after-free KFENCE violation during sysfs firmware write Sasha Levin
2023-02-27  2:08 ` [PATCH AUTOSEL 5.15 08/25] Revert "fbcon: don't lose the console font across generic->chip driver switch" Sasha Levin
2023-02-27  2:08 ` [PATCH AUTOSEL 5.15 09/25] drm: amd: display: Fix memory leakage Sasha Levin
2023-02-27  2:08 ` [PATCH AUTOSEL 5.15 10/25] HID: multitouch: Add quirks for flipped axes Sasha Levin
2023-02-27 12:23   ` Jean Delvare
2023-02-27 14:34     ` Greg KH
2023-02-27 14:59     ` Sasha Levin
2023-02-27  2:08 ` [PATCH AUTOSEL 5.15 11/25] drm/msm/dsi: Add missing check for alloc_ordered_workqueue Sasha Levin
2023-02-27  2:08 ` [PATCH AUTOSEL 5.15 12/25] docs/scripts/gdb: add necessary make scripts_gdb step Sasha Levin
2023-02-27  2:08 ` Sasha Levin [this message]
2023-02-27  2:08 ` [PATCH AUTOSEL 5.15 14/25] ASoC: kirkwood: Iterate over array indexes instead of using pointer math Sasha Levin
2023-02-27  2:08 ` [PATCH AUTOSEL 5.15 15/25] regulator: max77802: Bounds check regulator id against opmode Sasha Levin
2023-02-27  2:08 ` [PATCH AUTOSEL 5.15 16/25] regulator: s5m8767: Bounds check id indexing into arrays Sasha Levin
2023-02-27  2:08 ` [PATCH AUTOSEL 5.15 17/25] gfs2: Improve gfs2_make_fs_rw error handling Sasha Levin
2023-02-27  2:08 ` [PATCH AUTOSEL 5.15 18/25] hwmon: (coretemp) Simplify platform device handling Sasha Levin
2023-02-27  2:08 ` [PATCH AUTOSEL 5.15 19/25] pinctrl: at91: use devm_kasprintf() to avoid potential leaks Sasha Levin
2023-02-27  2:08 ` [PATCH AUTOSEL 5.15 20/25] scsi: snic: Fix memory leak with using debugfs_lookup() Sasha Levin
2023-02-27  2:08 ` [PATCH AUTOSEL 5.15 21/25] HID: logitech-hidpp: Don't restart communication if not necessary Sasha Levin
2023-02-27  2:08 ` [PATCH AUTOSEL 5.15 22/25] drm: panel-orientation-quirks: Add quirk for Lenovo IdeaPad Duet 3 10IGL5 Sasha Levin
2023-02-27  2:08 ` [PATCH AUTOSEL 5.15 23/25] dm thin: add cond_resched() to various workqueue loops Sasha Levin
2023-02-27  2:08 ` [PATCH AUTOSEL 5.15 24/25] dm cache: " Sasha Levin
2023-02-27  2:08 ` [PATCH AUTOSEL 5.15 25/25] nfsd: zero out pointers after putting nfsd_files on COPY setup error Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230227020855.1051605-13-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=perex@perex.cz \
    --cc=s47.kang@samsung.com \
    --cc=stable@vger.kernel.org \
    --cc=tiwai@suse.com \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox