From: Rob Herring <robh@kernel.org>
To: "Martin Zaťovič" <m.zatovic1@gmail.com>
Cc: linux-kernel@vger.kernel.org, krzysztof.kozlowski+dt@linaro.org,
gregkh@linuxfoundation.org, airlied@redhat.com,
dipenp@nvidia.com, treding@nvidia.com, mwen@igalia.com,
fmdefrancesco@gmail.com, arnd@arndb.de, bvanassche@acm.org,
ogabbay@kernel.org, axboe@kernel.dk, mathieu.poirier@linaro.org,
linux@zary.sk, masahiroy@kernel.org, yangyicong@hisilicon.com,
dan.j.williams@intel.com, jacek.lawrynowicz@linux.intel.com,
benjamin.tissoires@redhat.com, devicetree@vger.kernel.org,
furong.zhou@linux.intel.com, andriy.shevchenko@intel.com,
linus.walleij@linaro.org
Subject: Re: [PATCHv3 1/4] dt-bindings: wiegand: add Wiegand controller common properties
Date: Fri, 3 Mar 2023 13:32:13 -0600 [thread overview]
Message-ID: <20230303193213.GA6048-robh@kernel.org> (raw)
In-Reply-To: <20230301142835.19614-2-m.zatovic1@gmail.com>
On Wed, Mar 01, 2023 at 03:28:32PM +0100, Martin Zaťovič wrote:
> Wiegand bus is defined by a Wiegand controller node. This node
> can contain one or more device nodes for devices attached to
> the controller(it is advised to only connect one device as Wiegand
> is a point-to-point bus).
>
> Wiegand controller needs to specify several attributes such as
> the pulse length in order to function properly. These attributes
> are documented here.
>
> Acked-by: Linus Walleij <linus.walleij@linaro.org>
> Signed-off-by: Martin Zaťovič <m.zatovic1@gmail.com>
> ---
> .../bindings/wiegand/wiegand-controller.yaml | 39 +++++++++++++++++++
> MAINTAINERS | 5 +++
> 2 files changed, 44 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/wiegand/wiegand-controller.yaml
>
> diff --git a/Documentation/devicetree/bindings/wiegand/wiegand-controller.yaml b/Documentation/devicetree/bindings/wiegand/wiegand-controller.yaml
> new file mode 100644
> index 000000000000..df985cb3045a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/wiegand/wiegand-controller.yaml
> @@ -0,0 +1,39 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/wiegand/wiegand-controller.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Wiegand Generic Controller Common Properties
> +
> +maintainers:
> + - Martin Zaťovič <martin.zatovic@tbs-biometrics.com>
> +
> +description:
> + Wiegand busses can be described with a node for the Wiegand controller device
> + and a set of child nodes for each SPI slave on the bus.
> +
> +properties:
> + $nodename:
> + pattern: "^wiegand(@.*|-[0-9a-f])?$"
> +
> + pulse-len-us:
> + description: |
Don't need '|' here and elsewhere.
With that fixed,
Reviewed-by: Rob Herring <robh@kernel.org>
> + Length of the low pulse in microseconds.
> +
> + interval-len-us:
> + description: |
> + Length of a whole bit (both the pulse and the high phase) in microseconds.
> +
> + frame-gap-us:
> + description: |
> + Length of the last bit of a frame (both the pulse and the high phase) in
> + microseconds.
> +
> +required:
> + - compatible
> + - pulse-len-us
> + - interval-len-us
> + - frame-gap-us
> +
> +additionalProperties: true
> diff --git a/MAINTAINERS b/MAINTAINERS
> index b0db911207ba..1f6f6d236f0c 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -22512,6 +22512,11 @@ L: linux-rtc@vger.kernel.org
> S: Maintained
> F: drivers/rtc/rtc-sd3078.c
>
> +WIEGAND BUS DRIVER
> +M: Martin Zaťovič <m.zatovic1@gmail.com>
> +S: Maintained
> +F: Documentation/devicetree/bindings/wiegand/wiegand-controller.yaml
> +
> WIIMOTE HID DRIVER
> M: David Rheinsberg <david.rheinsberg@gmail.com>
> L: linux-input@vger.kernel.org
> --
> 2.39.2
>
next prev parent reply other threads:[~2023-03-03 19:32 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-01 14:28 [PATCHv3 0/4] Wiegand bus driver and GPIO bitbanged controller Martin Zaťovič
2023-03-01 14:28 ` [PATCHv3 1/4] dt-bindings: wiegand: add Wiegand controller common properties Martin Zaťovič
2023-03-03 19:32 ` Rob Herring [this message]
2023-03-01 14:28 ` [PATCHv3 2/4] wiegand: add Wiegand bus driver Martin Zaťovič
2023-03-01 16:23 ` Andy Shevchenko
2023-03-01 16:48 ` Andy Shevchenko
2023-04-04 13:13 ` Martin Zaťovič
2023-04-04 20:30 ` Linus Walleij
2023-04-05 8:39 ` Andy Shevchenko
2023-03-01 22:53 ` kernel test robot
[not found] ` <CAPGNi97oc+tSrt-NF4KZhcEyUfZTo4PT0ms8zYSFVEyzOBq4ZA@mail.gmail.com>
2023-03-14 15:15 ` Andy Shevchenko
2023-03-01 14:28 ` [PATCHv3 3/4] dt-bindings: wiegand: add GPIO bitbanged Wiegand controller Martin Zaťovič
2023-03-12 10:34 ` Evgeny Boger
2023-03-01 14:28 ` [PATCHv3 4/4] wiegand: add Wiegand GPIO bitbanged controller driver Martin Zaťovič
2023-03-01 16:43 ` Andy Shevchenko
2023-03-02 2:11 ` kernel test robot
2023-03-12 10:32 ` Evgeny Boger
2023-03-01 16:43 ` [PATCHv3 0/4] Wiegand bus driver and GPIO bitbanged controller Andy Shevchenko
2023-03-12 10:19 ` Evgeny Boger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230303193213.GA6048-robh@kernel.org \
--to=robh@kernel.org \
--cc=airlied@redhat.com \
--cc=andriy.shevchenko@intel.com \
--cc=arnd@arndb.de \
--cc=axboe@kernel.dk \
--cc=benjamin.tissoires@redhat.com \
--cc=bvanassche@acm.org \
--cc=dan.j.williams@intel.com \
--cc=devicetree@vger.kernel.org \
--cc=dipenp@nvidia.com \
--cc=fmdefrancesco@gmail.com \
--cc=furong.zhou@linux.intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=jacek.lawrynowicz@linux.intel.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@zary.sk \
--cc=m.zatovic1@gmail.com \
--cc=masahiroy@kernel.org \
--cc=mathieu.poirier@linaro.org \
--cc=mwen@igalia.com \
--cc=ogabbay@kernel.org \
--cc=treding@nvidia.com \
--cc=yangyicong@hisilicon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox