public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Walker Chen <walker.chen@starfivetech.com>
To: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>,
	Vinod Koul <vkoul@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor.dooley@microchip.com>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	"Emil Renner Berthing" <emil.renner.berthing@canonical.com>,
	Walker Chen <walker.chen@starfivetech.com>
Cc: <dmaengine@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <linux-riscv@lists.infradead.org>
Subject: [PATCH v4 2/3] dmaengine: dw-axi-dmac: Add support for StarFive JH7110 DMA
Date: Mon, 6 Mar 2023 22:04:29 +0800	[thread overview]
Message-ID: <20230306140430.28951-3-walker.chen@starfivetech.com> (raw)
In-Reply-To: <20230306140430.28951-1-walker.chen@starfivetech.com>

Add dma reset operation in device probe and use different configuration
on CH_CFG registers according to match data. Update all uses of
of_device_is_compatible with of_device_get_match_data.

Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Walker Chen <walker.chen@starfivetech.com>
---
 .../dma/dw-axi-dmac/dw-axi-dmac-platform.c    | 67 ++++++++++++++++---
 drivers/dma/dw-axi-dmac/dw-axi-dmac.h         |  2 +
 2 files changed, 61 insertions(+), 8 deletions(-)

diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
index bf85aa0979ec..d1148f6fbcf9 100644
--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
@@ -21,10 +21,12 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/of_dma.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/property.h>
+#include <linux/reset.h>
 #include <linux/slab.h>
 #include <linux/types.h>
 
@@ -46,6 +48,12 @@
 	DMA_SLAVE_BUSWIDTH_32_BYTES	| \
 	DMA_SLAVE_BUSWIDTH_64_BYTES)
 
+struct axi_dma_chip_config {
+	int (*apb_setup)(struct platform_device *pdev, struct axi_dma_chip *chip);
+	int (*reset_init)(struct platform_device *pdev);
+	bool use_cfg2;
+};
+
 static inline void
 axi_dma_iowrite32(struct axi_dma_chip *chip, u32 reg, u32 val)
 {
@@ -86,7 +94,8 @@ static inline void axi_chan_config_write(struct axi_dma_chan *chan,
 
 	cfg_lo = (config->dst_multblk_type << CH_CFG_L_DST_MULTBLK_TYPE_POS |
 		  config->src_multblk_type << CH_CFG_L_SRC_MULTBLK_TYPE_POS);
-	if (chan->chip->dw->hdata->reg_map_8_channels) {
+	if (chan->chip->dw->hdata->reg_map_8_channels &&
+	    !chan->chip->dw->hdata->use_cfg2) {
 		cfg_hi = config->tt_fc << CH_CFG_H_TT_FC_POS |
 			 config->hs_sel_src << CH_CFG_H_HS_SEL_SRC_POS |
 			 config->hs_sel_dst << CH_CFG_H_HS_SEL_DST_POS |
@@ -1142,7 +1151,7 @@ static int dma_chan_terminate_all(struct dma_chan *dchan)
 	axi_chan_disable(chan);
 
 	ret = readl_poll_timeout_atomic(chan->chip->regs + DMAC_CHEN, val,
-					!(val & chan_active), 1000, 10000);
+					!(val & chan_active), 1000, DMAC_TIMEOUT_US);
 	if (ret == -ETIMEDOUT)
 		dev_warn(dchan2dev(dchan),
 			 "%s failed to stop\n", axi_chan_name(chan));
@@ -1367,13 +1376,33 @@ static int parse_device_properties(struct axi_dma_chip *chip)
 	return 0;
 }
 
+static int intel_apb_setup(struct platform_device *pdev, struct axi_dma_chip *chip)
+{
+	chip->apb_regs = devm_platform_ioremap_resource(pdev, 1);
+	if (IS_ERR(chip->apb_regs))
+		return PTR_ERR(chip->apb_regs);
+	else
+		return 0;
+}
+
+static int jh7110_reset_init(struct platform_device *pdev)
+{
+	struct reset_control *resets;
+
+	resets = devm_reset_control_array_get_exclusive(&pdev->dev);
+	if (IS_ERR(resets))
+		return PTR_ERR(resets);
+
+	return reset_control_deassert(resets);
+}
+
 static int dw_probe(struct platform_device *pdev)
 {
-	struct device_node *node = pdev->dev.of_node;
 	struct axi_dma_chip *chip;
 	struct resource *mem;
 	struct dw_axi_dma *dw;
 	struct dw_axi_dma_hcfg *hdata;
+	const struct axi_dma_chip_config *ccfg;
 	u32 i;
 	int ret;
 
@@ -1402,10 +1431,21 @@ static int dw_probe(struct platform_device *pdev)
 	if (IS_ERR(chip->regs))
 		return PTR_ERR(chip->regs);
 
-	if (of_device_is_compatible(node, "intel,kmb-axi-dma")) {
-		chip->apb_regs = devm_platform_ioremap_resource(pdev, 1);
-		if (IS_ERR(chip->apb_regs))
-			return PTR_ERR(chip->apb_regs);
+	ccfg = of_device_get_match_data(&pdev->dev);
+	if (ccfg) {
+		if (ccfg->apb_setup) {
+			ret = ccfg->apb_setup(pdev, chip);
+			if (ret)
+				return ret;
+		}
+
+		if (ccfg->reset_init) {
+			ret = ccfg->reset_init(pdev);
+			if (ret)
+				return ret;
+		}
+
+		chip->dw->hdata->use_cfg2 = ccfg->use_cfg2;
 	}
 
 	chip->core_clk = devm_clk_get(chip->dev, "core-clk");
@@ -1557,9 +1597,20 @@ static const struct dev_pm_ops dw_axi_dma_pm_ops = {
 	SET_RUNTIME_PM_OPS(axi_dma_runtime_suspend, axi_dma_runtime_resume, NULL)
 };
 
+static const struct axi_dma_chip_config intel_chip_config = {
+	.apb_setup = intel_apb_setup,
+	.use_cfg2 = false,
+};
+
+static const struct axi_dma_chip_config jh7110_chip_config = {
+	.reset_init = jh7110_reset_init,
+	.use_cfg2 = true,
+};
+
 static const struct of_device_id dw_dma_of_id_table[] = {
 	{ .compatible = "snps,axi-dma-1.01a" },
-	{ .compatible = "intel,kmb-axi-dma" },
+	{ .compatible = "intel,kmb-axi-dma", .data = &intel_chip_config },
+	{ .compatible = "starfive,jh7110-axi-dma", .data = &jh7110_chip_config },
 	{}
 };
 MODULE_DEVICE_TABLE(of, dw_dma_of_id_table);
diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac.h b/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
index e9d5eb0fd594..b906d5884efe 100644
--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
@@ -21,6 +21,7 @@
 #define DMAC_MAX_CHANNELS	16
 #define DMAC_MAX_MASTERS	2
 #define DMAC_MAX_BLK_SIZE	0x200000
+#define DMAC_TIMEOUT_US		200000
 
 struct dw_axi_dma_hcfg {
 	u32	nr_channels;
@@ -33,6 +34,7 @@ struct dw_axi_dma_hcfg {
 	/* Register map for DMAX_NUM_CHANNELS <= 8 */
 	bool	reg_map_8_channels;
 	bool	restrict_axi_burst_len;
+	bool	use_cfg2;
 };
 
 struct axi_dma_chan {
-- 
2.17.1


  parent reply	other threads:[~2023-03-06 14:05 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-03-06 14:04 [PATCH v4 0/3] Add DMA driver for StarFive JH7110 SoC Walker Chen
2023-03-06 14:04 ` [PATCH v4 1/3] dt-bindings: dma: snps,dw-axi-dmac: constrain resets items for JH7110 dma Walker Chen
2023-03-07  9:03   ` Krzysztof Kozlowski
2023-03-07 10:30     ` Walker Chen
2023-03-07 15:51       ` Krzysztof Kozlowski
2023-03-08  1:08         ` Walker Chen
2023-03-06 14:04 ` Walker Chen [this message]
2023-03-06 14:39   ` [PATCH v4 2/3] dmaengine: dw-axi-dmac: Add support for StarFive JH7110 DMA Emil Renner Berthing
2023-03-07  1:38     ` Walker Chen
2023-03-06 14:04 ` [PATCH v4 3/3] riscv: dts: starfive: add dma controller node Walker Chen
2023-03-06 14:51   ` Emil Renner Berthing
2023-03-07  1:40     ` Walker Chen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230306140430.28951-3-walker.chen@starfivetech.com \
    --to=walker.chen@starfivetech.com \
    --cc=Eugeniy.Paltsev@synopsys.com \
    --cc=conor.dooley@microchip.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dmaengine@vger.kernel.org \
    --cc=emil.renner.berthing@canonical.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=palmer@dabbelt.com \
    --cc=robh+dt@kernel.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox