From: korantwork@gmail.com
To: nirmal.patel@linux.intel.com, kbusch@kernel.org,
jonathan.derrick@linux.dev, lpieralisi@kernel.org
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
Xinghui Li <korantli@tencent.com>
Subject: [PATCH v2] PCI:vmd: add the module param to adjust msi mode
Date: Tue, 7 Mar 2023 16:35:59 +0800 [thread overview]
Message-ID: <20230307083559.2379758-1-korantwork@gmail.com> (raw)
From: Xinghui Li <korantli@tencent.com>
In the legacy, the vmd msi-mode can only be adjusted by configing
vmd_ids table.This patch adds another way to adjust msi mode by
adjusting module param, which allow users easier to adjust the vmd
according to the I/O scenario without rebuilding driver.There are two
params could be recognized: on, off. The default param is "NULL",
the goal is not to affect the existing settings of the device.
Signed-off-by: Xinghui Li <korantli@tencent.com>
Reviewed-by: Nirmal Patel <nirmal.patel@linux.intel.com>
---
drivers/pci/controller/vmd.c | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/drivers/pci/controller/vmd.c b/drivers/pci/controller/vmd.c
index 990630ec57c6..8b42b2c1d949 100644
--- a/drivers/pci/controller/vmd.c
+++ b/drivers/pci/controller/vmd.c
@@ -34,6 +34,20 @@
#define MB2_SHADOW_OFFSET 0x2000
#define MB2_SHADOW_SIZE 16
+/*
+ * The VMD msi_remap module parameter provides the alternative way
+ * to adjust msi mode when loading vmd.ko other than vmd_ids table.
+ * There are two params could be recognized:
+ *
+ * 1-off
+ * 2-on
+ *
+ * The default param is "NULL", the goal is not to affect the existing
+ * settings of the device.
+ */
+char *msi_remap = "NULL";
+module_param(msi_remap, charp, 0444);
+
enum vmd_features {
/*
* Device may contain registers which hint the physical location of the
@@ -875,6 +889,7 @@ static int vmd_enable_domain(struct vmd_dev *vmd, unsigned long features)
return ret;
vmd_set_msi_remapping(vmd, true);
+ dev_info(&vmd->dev->dev, "init vmd with remapping msi-x\n");
ret = vmd_create_irq_domain(vmd);
if (ret)
@@ -887,6 +902,7 @@ static int vmd_enable_domain(struct vmd_dev *vmd, unsigned long features)
irq_domain_update_bus_token(vmd->irq_domain, DOMAIN_BUS_VMD_MSI);
} else {
vmd_set_msi_remapping(vmd, false);
+ dev_info(&vmd->dev->dev, "init vmd with bypass msi-x\n");
}
pci_add_resource(&resources, &vmd->resources[0]);
@@ -955,6 +971,14 @@ static int vmd_enable_domain(struct vmd_dev *vmd, unsigned long features)
return 0;
}
+static void vmd_config_msi_remap_param(unsigned long *features)
+{
+ if (strcmp(msi_remap, "on") == 0)
+ *features &= ~(VMD_FEAT_CAN_BYPASS_MSI_REMAP);
+ else if (strcmp(msi_remap, "off") == 0)
+ *features |= VMD_FEAT_CAN_BYPASS_MSI_REMAP;
+}
+
static int vmd_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
unsigned long features = (unsigned long) id->driver_data;
@@ -984,6 +1008,8 @@ static int vmd_probe(struct pci_dev *dev, const struct pci_device_id *id)
if (err < 0)
goto out_release_instance;
+ vmd_config_msi_remap_param(&features);
+
vmd->cfgbar = pcim_iomap(dev, VMD_CFGBAR, 0);
if (!vmd->cfgbar) {
err = -ENOMEM;
--
2.31.1
next reply other threads:[~2023-03-07 8:36 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-07 8:35 korantwork [this message]
2023-03-08 22:57 ` [PATCH v2] PCI:vmd: add the module param to adjust msi mode Bjorn Helgaas
2023-03-09 12:31 ` Xinghui Li
2023-03-15 21:49 ` Patel, Nirmal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230307083559.2379758-1-korantwork@gmail.com \
--to=korantwork@gmail.com \
--cc=jonathan.derrick@linux.dev \
--cc=kbusch@kernel.org \
--cc=korantli@tencent.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=nirmal.patel@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox