From: Richard Fitzgerald <rf@opensource.cirrus.com>
To: <broonie@kernel.org>, <pierre-louis.bossart@linux.intel.com>
Cc: <peter.ujfalusi@linux.intel.com>,
<yung-chuan.liao@linux.intel.com>, <alsa-devel@alsa-project.org>,
<linux-kernel@vger.kernel.org>, <patches@opensource.cirrus.com>,
Richard Fitzgerald <rf@opensource.cirrus.com>
Subject: [PATCH v2 0/8] ASoC: Initial support for Cirrus Logic CS35L56
Date: Mon, 13 Mar 2023 15:49:47 +0000 [thread overview]
Message-ID: <20230313154955.4268-1-rf@opensource.cirrus.com> (raw)
The CS35L56 is a high-performance boosted mono audio amplifier.
Supported control interfaces are I2C, SPI or SoundWire.
Supported audio interfaces are I2S/TDM or SoundWire.
The CS35L56 has a self-booting firmware in ROM, with the ability
to patch the firmware and/or apply tunings.
Patches #1 to #7 add support to cs_dsp and wm_adsp for self-booting
firmware and the ability to apply a .bin file without having to
apply a .wmfw.
Changes since v1:
- Check for error when getting pm_runtime in cs35l56_irq().
- Use SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK instead of the old define.
- Re-word two comments in cs35l56-sdw.c.
- Add an comment explaining the wait for init_completion in
cs35l56_dsp_work().
- Omit patches to Intel machine driver. These will be done as a
separate thread.
Richard Fitzgerald (1):
ASoC: cs35l56: Add driver for Cirrus Logic CS35L56
Simon Trimmer (7):
firmware: cs_dsp: Introduce no_core_startstop for self-booting DSPs
ASoC: wm_adsp: Use no_core_startstop to prevent creating preload
control
firmware: cs_dsp: Support DSPs that don't require firmware download
ASoC: wm_adsp: Support DSPs that don't require firmware download
ASoC: wm_adsp: Expose the DSP boot work actions as wm_adsp_power_up()
ASoC: wm_adsp: Add support for loading bin files without wmfw
ASoC: wm_adsp: Simplify the logging of requested firmware files
MAINTAINERS | 1 +
drivers/firmware/cirrus/cs_dsp.c | 17 +-
include/linux/firmware/cirrus/cs_dsp.h | 1 +
include/sound/cs35l56.h | 266 +++++
sound/soc/codecs/Kconfig | 34 +
sound/soc/codecs/Makefile | 10 +
sound/soc/codecs/cs35l56-i2c.c | 83 ++
sound/soc/codecs/cs35l56-sdw.c | 528 +++++++++
sound/soc/codecs/cs35l56-shared.c | 390 +++++++
sound/soc/codecs/cs35l56-spi.c | 81 ++
sound/soc/codecs/cs35l56.c | 1461 ++++++++++++++++++++++++
sound/soc/codecs/cs35l56.h | 77 ++
sound/soc/codecs/wm_adsp.c | 63 +-
sound/soc/codecs/wm_adsp.h | 3 +
14 files changed, 2999 insertions(+), 16 deletions(-)
create mode 100644 include/sound/cs35l56.h
create mode 100644 sound/soc/codecs/cs35l56-i2c.c
create mode 100644 sound/soc/codecs/cs35l56-sdw.c
create mode 100644 sound/soc/codecs/cs35l56-shared.c
create mode 100644 sound/soc/codecs/cs35l56-spi.c
create mode 100644 sound/soc/codecs/cs35l56.c
create mode 100644 sound/soc/codecs/cs35l56.h
--
2.30.2
next reply other threads:[~2023-03-13 15:50 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-13 15:49 Richard Fitzgerald [this message]
2023-03-13 15:49 ` [PATCH v2 1/8] firmware: cs_dsp: Introduce no_core_startstop for self-booting DSPs Richard Fitzgerald
2023-03-13 15:49 ` [PATCH v2 2/8] ASoC: wm_adsp: Use no_core_startstop to prevent creating preload control Richard Fitzgerald
2023-03-13 15:49 ` [PATCH v2 3/8] firmware: cs_dsp: Support DSPs that don't require firmware download Richard Fitzgerald
2023-03-13 15:49 ` [PATCH v2 4/8] ASoC: wm_adsp: " Richard Fitzgerald
2023-03-13 15:49 ` [PATCH v2 5/8] ASoC: wm_adsp: Expose the DSP boot work actions as wm_adsp_power_up() Richard Fitzgerald
2023-03-13 15:49 ` [PATCH v2 6/8] ASoC: wm_adsp: Add support for loading bin files without wmfw Richard Fitzgerald
2023-03-13 15:49 ` [PATCH v2 7/8] ASoC: wm_adsp: Simplify the logging of requested firmware files Richard Fitzgerald
2023-03-13 15:49 ` [PATCH v2 8/8] ASoC: cs35l56: Add driver for Cirrus Logic CS35L56 Richard Fitzgerald
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230313154955.4268-1-rf@opensource.cirrus.com \
--to=rf@opensource.cirrus.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@opensource.cirrus.com \
--cc=peter.ujfalusi@linux.intel.com \
--cc=pierre-louis.bossart@linux.intel.com \
--cc=yung-chuan.liao@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox